(0)
Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Steering U-Joints - 13/16 Inch -36 Spline / Big GM Pre 1978

Price: $14.99 - $64.99
Click image to enlarge Click image to enlarge
No video at this time.
 

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. All of these steering u-joints have 3/4 weld-on ends. Joints available for round or double D shaft.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints

Big GM Pre 1978, 13/16"-36 Spline

Steering U-Joints and Couplers Application Chart

Spline Size (Link)

When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2

Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.

Tech Tip #1: When using more than two universal joints in a system, a support heim must be used.

Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint.

910-32283  -  Warning: This coupler is splined 13/16 x 36 all the way through.  It fits OK on 3/4" round shaft for welding, even though it has interior splines.

Reviews for Item #: 91032239
Be the first to review this product. Write a Review
 

Questions and Answers for Item #: 91032239

Get your questions answered by the community. Ask or answer questions below.

Processing
Be the first to submit a question. Click the "Ask a Question" button to continue.
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
401-50611 - U-JOINT, 13/16"-36 SPLINE TO 3/4" ROUND WELD-ON
Price:
$49.99
EA
In Stock
Item #:
91032239
 
(0 Rating)
401-51119 - U-JOINT, 13/16"-36 SPLINE TO 3/4" DD
Price:
$64.99
EA
In Stock
Item #:
91032296
 
(0 Rating)
401-51120 - U-JOINT, 13/16"-36 SPLINE TO 1" DD
Price:
$64.99
EA
In Stock
Item #:
91032396
 
(0 Rating)
301-30110 - STEERING COUPLER, 13/16"-36 SPLINE TO 3/4" ROUND NON-FLEX
Price:
$14.99
EA
In Stock
Item #:
91032283
Item Details:
Note: Coupler features 13/16"-36 internal splines from end to end of this unit. It will also work for a 3/4" weld on application.
 
(0 Rating)
  Show Specifications
Our Techs also Suggest the Following:
Steering Shaft Heim, 3/4" RH
Price:
$9.99
EA
In Stock
Item #:
1750757
Item Details:
.757" Ball Hole
 
(13 Ratings)
DOUBLE D SHAFT, 3/4" O.D.
Item #:
91032386
 
(4 Ratings)
HOLLOW STEERING SHAFT
Item #:
91632201
Item Details:
Steel Shaft
 
(3 Ratings)
You May Also Be Interested In...