ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Steering Rag Joint, 3/4 Inch-30 Spline x 1 Inch DD

SAME DAY SHIPPING! Most orders ship within 24 hours.

Free Shipping Free Shipping
Steering Rag Joint, 3/4 Inch-30 Spline x 1 Inch DD

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These rage joints make it easier to put an Ididit column in your '55-'57 Chevy car when using an aftermarket steering box. 

Steering U-Joints and Couplers Application Chart (GIF)

Steering Box/Rack/Spline Chart (Link)

Spline Size (Link)

 

Application

When purchasing rag joints, 3 easy steps will help ensure that they will be correct for your application.

STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.

STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.

STEP 3
With these two pieces of information at hand, refer to our information to find the appropriate part number of the rag joint for your specific application.

Customer Reviews

Rated 5 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Craig
Verified Purchaser
Colorado

Nice piece works well High quality

May 21, 2012
Worth the money
Pros:
  • High-Performance
  • Durable
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

jrocco
Verified Purchaser
Houston TX

Worked fine

September 17, 2011
Installed this in a 56 Bel Air with aftermarket column and conversion power steering box. Worked great for this application.
Pros:
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Ididit 1120550010 1955-56 Chevy Tilt Steering Column, Plain
(Part #4461255)
                        Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

446-1255 Instructions (PDF)


Item Details

w/o Shift
Ididit 1120570010 1957 Chevy Tilt Steering Column, Plain
(Part #4461257)
                        

Make your 1957 Chevy more comfortable to drive by installing a new Ididit steering column. Ididit tilt steering columns with no shifter will move the steering wheel back 2" towards the driver. Columns use the common 1969 and up GM wheel adapters.

  • Self-Canceling Turn Signals
  • 4-Way Flashers
  • Billet Knobs and Handles
  • 3-7/8" Wiring Plug
  • 1" DD Lower Shaft
  • Plain steel finish

Wiring adapters for the stock harness are listed along with a floor mount. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

446-1257 Instructions (PDF)

Item Details

No shifter
Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
(Part #4461455)
                        Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. 

Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

446-1455 Instructions (PDF)


Item Details

w/ Shift
Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
(Part #4465249)
                        

No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

 

Steering Rag Joint, 3/4 Inch-30 Spline x 3/4 Inch-36 Spline
(Part #4463431)
                        

These rage joints make it easier to put an Ididit column in your '55-'57 Chevy car when using an aftermarket steering box. 

Steering U-Joints and Couplers Application Chart (GIF)

Steering Box/Rack/Spline Chart (Link)

Spline Size (Link)