Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Steer Clear Steering Box Drop, Brushed Finish

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Finally, a solution to the age old steering column/pedals problem. This nifty box provides unlimited options for steering shaft clearance so a high performance engine and headers will fit. Allows you to safely reposition the steering column higher, giving you more room for your feet and pedals.

  • Chain driven action
  • Improved road feel versus typical U-joint setups
  • Mounts on the inside or outside of your firewall
  • Four reinforced through-holes assure a strong, secure installation
  • Uses common 3/4"-36 spline U-joints and couplers
  • 4-1/2" wide X 1-1/2" thick(less shafts) X 4" longer than offsets

Available in 8", 10", 12", 14" or 16" offsets.

2006 Best Engineered New Product at SEMA

Specs

  • 4-1/2" wide
  • 1-1/2" thick (less shafts)
  • 4" longer than the offset
  • Uses common 3/4"-36 spline u-joints and couplers

Warranties

This product carries a lifetime guarantee to be free of defects in material and workmanship by the manufacturer, Wizard Fabrication.

You may also be interested in:

Steer Clear Steering Box Drop, Polished Finish
                        

Finally, a solution to the age old steering column/pedals problem. This nifty box provides unlimited options for steering shaft clearance so a high performance engine and headers will fit. Allows you to safely reposition the steering column higher, giving you more room for your feet and pedals.

  • Chain driven action
  • Improved road feel versus typical U-joint setups
  • Mounts on the inside or outside of your firewall
  • Four reinforced through-holes assure a strong, secure installation
  • Uses common 3/4"-36 spline U-joints and couplers

Available in 8", 10", 12", 14" or 16" offsets.

2006 Best Engineered New Product at SEMA

Unisteer 8050880 Steering U-Joint, 3/4 Inch-36 Spline to 3/4 Inch DD
                        

These polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.

This particular steering universal joints Size is 3/4"-36 count spline by 3/4"DD. This is the size that is used on Ford Power rack & pinions such as the Mustangs. This U-joint uses pinch bolt fasteners on either side.

  • The OD is 1.650" (41.90mm) 
  • 3-3/4" in total length
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

NOTE:  These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.

Sweet Mfg Steering U-Joint, 3/4 Inch 36-Spline to 3/4 DD, GM Manual/Mustang II
                        

Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
  •  3/4"-36 Spline
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sweet Mfg Steering Coupler, 3/4 36-Spline, 3/4 Rnd Non-Flex, GM Man/Mustang II
                        

Steel coupler is splined on one end and has a 3/4" round hole on the other. This Mustang II power rack U joint coupler is 2" L x 1.060" D.

When ordering, select applicable hole size/spline needed.

Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.