Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH

SAME DAY SHIPPING! Order within the next 7 hours 42 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Length:
1.75
Sold in Quantity:
Each
Diameter Small End :
1.00
Diameter Big End:
1.375
Thread Length:
1.00
Thread Pitch:
11/16"-18
Threads:
RH Female
Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH
Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH

Click image to enlarge

Speeday Motors Logo
X
Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 RH

Details

Reviews

Q & A

What's in the Box

Heavy duty steel weld bungs for splitting wishbones, custom tie rods or custom suspension control arms. These weld bungs are 1” O.D. where they slide into the steel 1" I.D. tubing.

You may also be interested in:

Plain Steel Jam Nut, 11/16-18 RH
                        

Plain steel fine thread jam nuts for use with rod ends, heim joints, and clevis.

Standard Steel RH Heim Joint Rod Ends, 11/16-18 Shank, 5/8 Hole
                        Every once in a while someone wants to use a rod end in place of a 11/16" tie rod. We listened to the requests and built them with 11/16"-18 RH or LH thread and accept a 5/8" thru-bolt.  Center of hole to end of threads 2-5/8"  thead length is 1-1/2".
                    
Outer Tie Rod End, 11/16-18 RH
                        Replace those sloppy worn out tie rods with our new replacements. Original equipment on 1948-1964 Ford half-ton pickups, but these tie rod ends can be used for multiple applications other than Ford trucks. Not for use with flat steering arms. Use only with Ford type steering arms with a tapered hole. Not normally used with Chevy spindles.
                    
Chrome Steel Jam Nut, 11/16 Inch-18 RH NF Fine Thread
                        

If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium chrome steel and they're available with right hand threads.

These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

  • 11/16 Inch-18 RH NF Fine Thread
  • Available in right hand thread.

Note: Always run a tap or die over and through any chromed threaded item. Apply anti-seize liberally to both threaded surfaces before assembly to prevent galling of threads. Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

Stainless Jam Nut, 11/16 Inch-18 RH NF Fine Thread
                        

If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium stainless steel and they're available with right hand threads.

These stainless steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.

  • 11/16 Inch-18 RH NF Fine Thread
  • Available in right hand thread.
Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 LH
                        

Heavy duty steel weld bungs for splitting wishbones, custom tie rods or custom suspension control arms. These weld bungs are 1” O.D. where they slide into the steel 1" I.D. tubing.

Industrial Tap, 11/16 Inch-18 SAE
                        

We supply those hard-to-find industrial taps. 4-flutes. Choose left hand or right hand thread for each tap.

Learn why running a tap or die over new threads is so important prior to assembly in our tech article, Installing New Hardware.

Stainless Steel Tie Rod End, 11/16-18 RH
                        These tie rod ends are just like our standard Ford tie rod ends except they are made of beautifully polished stainless steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads. 
                    
Wishbone Splitting Kit for Tie Rod Ends
                        

To get that traditional look you need to have split wishbones. This kit allows you to weld up your own split bones and includes 11/16" weld-in bungs for the wishbones, jam nuts and 11/16" tie rod ends.

Cutting & welding required.

Wishbone Splitting Kit for Heim Joints
                        

To get that traditional look you need to have split wishbones. This kit allows you to weld up your own split bones and includes 11/16" weld-in bungs for the wishbones, jam nuts and 11/16" heim joint rod ends. Heim accepts a 5/8" bolt.

Cutting & welding required.

Chrome Tie Rod End, 11/16-18 RH
                        These tie rod ends are just like our standard Ford 7° taper tie rod ends except they are made of beautifully chrome plated steel. They have 11/16"-18 thread and include hardware. Make sure to use anti-seize on the threads.
                    
Pro-Blend 1720 Anti-Seize Compound
                        

Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

  • Defies contact of dissimilar or like metals
  • Not affected by heat, moisture, salt water, or corrosion

Learn why using anti-seize is so important in our tech article, Installing New Hardware.