Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole

SAME DAY SHIPPING! Order within the next 11 hours 28 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Width:
1.76
Overall Length:
3.75
Sold in Quantity:
Each
Finish:
Zinc
Hole Diameter:
0.7570
Inside Diameter:
.76
Thread Length:
1.75
Thread Pitch:
3/4"-16
Center Hole to End of Shank:
2.88
Threads:
RH Male
Garage Sale:
No
Ball Thickness:
.88
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole

Click image to enlarge

Speeday Motors Logo
X
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole

Details

Reviews

Q & A

What's in the Box

3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


Item Details

.757" Ball Hole

You may also be interested in:

Steering Shaft, 3/4 Inch O.D. Double D, 4-16 Inch Lengths, Steel
                        

This steering shaft is 3/4" O.D DD. This steering shaft also has a 1.00" long "D" design on each end.

This steering shaft entails:

  • 1018 Steel
  • Weld on
  • Excellent for steering shafts or other uses 
  • Order desired length

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.

Steering Shaft, 3/4 Inch O.D. Double D Steel 18-36 Inch Lengths
                        

This steering shaft is 3/4" O.D DD. This steering shaft also has a 1.00" long "D" design on each end.

This steering shaft entails:

  • 1018 Steel
  • Weld on
  • Excellent for steering shafts or other uses 
  • Order desired length

 

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.

Hollow Steering Shaft
                        

This steering shaft is hollow and is cut-to-fit. This steering shaft entails:

  •   3/4" DOM
  • .120" wall hollow steering shaft
  • Available in 24", 36", 48", 60" and 72" length
  • Steel Steering shaft

 

3/4 O.D. Solid Steel Steering Shaft
                        

Speedways steering shaft is made for you to cut-to-fit. This steering shaft entails:

  •  3/4" O.D.
  • 1018 solid steel steering shaft
  • Available in 24", 36", 48", 60" and 72" lengths

 

Steer Shaft Application Chart

Steering Shaft Aluminum Heim Joint Rod Ends, 3/4-16 RH Male, .757 Hole
                        3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.
                    
Steering Shaft, Fully Machined Double D Shaft, Raw 22 Inch
                        

 Speedway now offers a steering shaft that is 3/4" DD machined the entire length of the shaft. This makes it easier to set up your steering. The carbon steel steering shaft come in 22".

 

Steering Shaft, Fully Machined Double D Shaft, Raw 36 Inch
                        

Speedway now offers a steering shaft which is 3/4" DD machined the entire length of the steering shaft. This makes it easier to set up your steering.The carbon steel steering shaft come in 36".

 

Flat Heim Joint Rod End Support Bracket
                        Overall length of 3 1/2 inches long.  Offered with a 3/4 clearances hole for steering heim with a slotted adjustment of 1 7/8 inch long. Bracket is 3/16 thick steel.
                    
Angled Heim Joint Rod End Support Bracket
                        Over all length of 3 1/2 inches long. Offered with a 3/4" clearance hole for steering heim with a slotted adjustment of 1 7/8 inch long angled at a 45 degrees.  Bracket is 3/16 thick steel
                    
Steering Shaft, Fully Machined Double D Shaft, 18 Inch
                        

Speedway now offers a steering shaft which is machined 3/4" DD the entire length of the steering shaft. This make it easy to set up your steering. This carbon steel DD steering shaft if offered in 18 lengths.

 

Thin Steel Jam Nut, 3/4-16 RH
                        

Plain steel fine thread jam nut. Special half thickness nuts for securing steering heims to a panel or flange.

Firewall Mount Steering Flange Sleeve, 3/4 Inch Shaft
                        This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" square mounting holes. 

Choose 3/4" (750) or 1" (1000) shaft size.

91032375-1000

  • Height: .74"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
91032375-750
  • Height: .87"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
Pro-Blend 1720 Anti-Seize Compound
                        

Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.

  • Defies contact of dissimilar or like metals
  • Not affected by heat, moisture, salt water, or corrosion

Learn why using anti-seize is so important in our tech article, Installing New Hardware.