Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Steel Double D Shaft, 3/4 Inch O.D., 18 - 36 Inch Lengths

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge



X

Details

Reviews

Q & A

What's in the Box

This 3/4" O.D. DD shaft has a 1.00" long "D" design on each end. Made from 1018 steel, weld-on. Excellent for steering shafts or other uses. Order desired length. 

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.

You may also be interested in:

Steel Double D Shaft, 3/4 Inch O.D., 4 - 16 Inch Lengths
                        

This 3/4" O.D. DD shaft has a 1.00" long "D" design on each end. Made from 1018 steel, weld-on. Excellent for steering shafts or other uses. Order desired length. 

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.

Polished Stainless Steel 3/4 O.D. Double D Shaft
                        It's pretty silly to use plain old steel double d shaft with those shiny stainless steel u-joints. We offer this polished stainless steel double D shaft in 18", 22" and 36" cut to fit lengths. 
                    
Speedway Fully Machined Double D Shaft, Raw 22 Inch
                        

We now offer ¾” DD shaft machined the entire length of the shaft, making it easier to set up your steering. Carbon steel shaft comes in 22".

Speedway Fully Machined Double D Shaft, Raw 36 Inch
                        We now offer ¾” DD shaft machined the entire length of the shaft, making  it easier to set up your steering.  Carbon steel shaft comes in   36”.
                    
Speedway Fully Machined Double D Shaft, Raw, 18 Inch
                        We now offer ¾” DD steering shaft machined the entire length of the shaft, making  it easier to set up your steering. This carbon steel double D shaft comes in 18" lengths.
                    
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole
                        3/4" heim for steering shaft.  Has .757 ball hole. Slides right over standard 3/4" steering shaft. 3/4" NF right hand threads. Jam nut sold separately.


Firewall Mount Flanged Bearing for Steering Shaft
                        This firewall mount allows up to 30° of mis-alignment. Includes ball with two pressed steel flanges with 5/16" square mounting holes. 

Choose 3/4" (750) or 1" (1000) shaft size.

91032375-1000

  • Height: .74"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"
91032375-750
  • Height: .87"
  • Length: 3.00"
  • Width: 1.90"
  • Mount C to C: 2.26"