Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male

SAME DAY SHIPPING! Order within the next 3 hours 40 minutes and receive same day shipping

Specs
Material Type:
Steel
Sold in Quantity:
Each
Threads:
RH Male
Finish:
Natural
Thread Pitch:
10-32
Hole Diameter:
0.1875
Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These right hand standard rod ends are a general purpose, two-piece design. They have a carbon steel body and a hardened steel ball without a race (metal to metal contact).

Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

Assembly: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Customer Reviews

Rated 5 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

64Falcon
Verified Purchaser
Canton, GA, USA

Super Quality

February 09, 2015
Part was just what I needed to finish project! Quality was just as described in catalog. Item worked great after installation.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

5160turbo
Verified Purchaser
oregon

good fast service

August 03, 2014
After try repeatedly to thread a heim joint into a threaded tube of Speedways three 2 sbc kit I realized it was left hand thread. I called and they quickly sent the correct one by air mail. Thanks
Pros:
  • new one right thread
Cons:
  • old one wrong thread
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Ratrodrider
Verified Purchaser
Panama City Beach, FL, USA

works great for throttle linkage

July 08, 2014
I use these for making throttle linkages on my 1940 PlymouthPT-105.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 2 answers

2 answers

Is the hole size the same as the threaded rod size?

October 26, 2011

Is the hole size the same as the threaded rod size?

Answers

February 10, 2015
64Falcon
Yes
October 26, 2011
Jason
Yes, on part #1750100 the hole is 3/16" and thread is 10-32
Page 1 of 1

You may also be interested in:

Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) RH Male
(Part #1170800)
                        

Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.

Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.

Assembly Tip:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Aluminum Rod Ends Chart (GIF)

Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) LH Male
(Part #1750300)
                        

These standard rod ends are a general purpose, two piece design. They have a carbon steel body and a hardened ball with metal to metal contact.

Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Standard Rod End Chart (GIF)

Precision Carbon Steel RH Male Heim Joint Rod Ends, 3/16 Inch
(Part #1750110)
                        Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.  

Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.

ASSEMBLY TIP:
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Standard Heim Sizes Chart (GIF)

Standard Steel Heim Joint Rod Ends, 3/16 Inch (10-32) RH Female
(Part #1750200)
                        

Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).

Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.

Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

Speedway Steel 3/16 Inch RH Male Throttle Linkage Rod Ends with Stud
(Part #1750120)
                        

These 3/16" rod ends can be used to create a trick throttle linkage system when combined with our swedged aluminum tubing.

Use with swedged aluminum throttle tube.

Item Details

3/16" stud/thread
Aluminum Jam Nuts, 10-32 RH, Pack/6
(Part #3159592)
                        

These jam nuts are made of 7075 aluminum alloy and are clear anodized for corrosion resistance. Fine thread for use with rod ends, heim joints, and clevis.

Sold in package of six.

Item Details

3/8" hex