Standard Steel Heim Joint Rod Ends, 1/2-20 LH Female
Click image to enlarge
Q & A
What's in the Box
Standard rod ends are for general purpose applications and are a 2-piece design with a low carbon steel body and a hardened steel ball without a race (metal to metal contact).
Applications: Clutch, brake, steering linkage, & suspension components on moderate horsepower applications.
Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
You may also be interested in:
Precision Carbon Steel LH Female Heim Joint Rod Ends, 1/2 InchMore Info
Speedway Steel 1/2 Inch LH Female Heim Joint Rod Ends with StudMore Info
AFCO 10443 Standard Steel Heim Rod End, 1/2-20 LH FemaleMore Info
Steel Jam Nuts, 1/2 Inch-20 Left Hand NF Fine Thread, Pack/6More Info
Seals-It WS5001 Heim Joint Rod End Seals, 1/2 Inch Hole, Set/6More Info
Steel Cone Spacers for Rod Ends, 1/2 InchMore Info
Precision steel rod ends provide greater strength than our "standard" rod ends. They have close tolerance and have a 3 piece medium duty rod end. Carbon steel body, 5210 precision ground ball and feature a Teflon Kevlar race. Self lubrication teflon liner to seal out dirt and debris. Shank and hole are the same size.
Applications: Clutch, Brake, Steering & Suspension Components. Quieter, Smoother, & More Durable Than 2 Piece Rod Ends. Tight Tolerance of Kevlar Race Reduces "Slop" In Steering & Suspension.
To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
These rod ends make it easy to build carb or shift linkage, tie rod assemblies or anything else you can think of. They are Teflon lined.
- Excellent for use as a medium-duty suspension rod end
- Ball - Case hardened steel hard chrome plated
- Race - N/A
- Body - Low carbon steel chromate treated
If you've got spherical rod ends on your vehicle, you'll probably need jam nuts. You might also need them for tie-rod ends or other types of fittings and connectors. Our jam nuts are made from premium steel (zinc-coated for corrosion prevention), and they're available with either right hand or left hand threads.
These steel fine thread jam nuts are for use with rod ends, heim joints, and clevis.
- 1/2 Inch-20 NF Fine Thread
- Sold in bags of six nuts.
- Choose left or right thread.
These rod end seals are a neoprene rubber seal bonded to an aircraft quality washer. Extends the life of your rod ends by keeping the dirt, debris and moisture out of the spherical ball. They fit on both sides of the ball end of the heim joint and are sized to match the hole in the spherical ball.
For use with standard and Pro 1 Series rod end only. Sold in sets of six, which will cover both sides of three rod ends.
These steel tapered spacers give you more travel when using rod ends on your steering linkage or suspension. Includes 8 spacers per package.