Standard Steel LH Heim Joint Rod Ends, 11/16-18 Shank, 5/8 Hole
Click image to enlarge
Q & A
What's in the Box
You may also be interested in:
Standard Steel RH Heim Joint Rod Ends, 11/16-18 Shank, 5/8 HoleMore Info
Plain Steel Jam Nut, 11/16-18 LHMore Info
Steel Weld Bung for 1 Inch I.D. Tube, 11/16-18 LHMore Info
Pro-Blend 1720 Anti-Seize CompoundMore Info
Every once in a while someone wants to use a rod end in place of a 11/16" tie rod. We listened to the requests and built them with 11/16"-18 RH or LH thread and accept a 5/8" thru-bolt. Center of hole to end of threads 2-5/8" thead length is 1-1/2".
Plain steel fine thread jam nuts for use with rod ends, heim joints, and clevis.
Heavy duty steel weld bungs for splitting wishbones, custom tie rods or custom suspension control arms. These weld bungs are 1” O.D. where they slide into the steel 1" I.D. tubing.
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.
- Defies contact of dissimilar or like metals
- Not affected by heat, moisture, salt water, or corrosion
Learn why using anti-seize is so important in our tech article, Installing New Hardware.