Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Stainless Steel Spring Clamps, 1-3/4 Inch Wide Leaf Spring

SAME DAY SHIPPING!

Specs
Material Type:
Stainless Steel
Overall Width:
2.05
Sold in Quantity:
Pair
Depth:
1.312
Inside Width:
1.78
Inside Length:
1.13
Garage Sale:
No
Notes
Bolt length is 2.45". Max spring thickness is 1.13"

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Stainless steel spring clamps to keep your front cross spring in alignment. Works with all brands of leaf springs.

To determine which spring clamp will fit your application, use a tape measure, ruler or caliper to measure the width of the main spring leaf (not length of leaf or leaf thickness) and order the spring clamps for that width. Most early Ford coupes and roadsters (and universal aftermarket replacement front ends for these types of vehicles) use a 1-3/4" wide spring.

  • Stainless steel
  • Hex head - 7/16" Wrench
  • 1/4"-10 thread pitch
  • Under-head bolt length - 2.45" long
  • For 1-3/4" wide leaf spring
  • Works with all brands of leaf springs

Specs


You may also be interested in:

Stainless Steel Spring Clamps, 2 Inch Wide Leaf Spring
                        

Stainless steel spring clamps to keep your front or rear cross spring in alignment. Works with all brands of leaf springs.

To determine which spring clamp will fit your application, use a tape measure, ruler or caliper to measure the width of the main spring leaf (not length of leaf or leaf thickness) and order the spring clamps for that width. Some later fat-fendered Ford cars used the 2" wide springs in front.

  • Stainless steel
  • Hex head - 7/16" Wrench
  • 1/4"-10 thread pitch
  • Under-head bolt length - 2.70" long
  • Bolt hole diameter - 1/4"
  • For 2" wide leaf spring
  • Works with all brands of leaf springs

 

Stainless Steel Spring Clamps, 2-1/4 Inch Wide Leaf Spring
                        

Stainless steel spring clamps to keep your rear cross spring in alignment. Works with all brands of leaf springs.

To determine which spring clamp will fit your application, use a tape measure, ruler or caliper to measure the width of the main spring leaf (not length of leaf or leaf thickness) and order the spring clamps for that width. The 2-1/4" wide springs were normally found on the rear of early Fords.

  • Stainless steel
  • Hex head - 7/16" Wrench
  • 1/4"-10 thread pitch
  • Under-head bolt length - 2.95" long
  • Bolt hole diameter - 1/4"
  • For 2-1/4" wide leaf spring
  • Works with all brands of leaf springs
  • 1-1/4" deep from inside edge to center of bolt