Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Stainless Steel Exhaust/Muffler Tube Clamps

SAME DAY SHIPPING! Order within the next 16 hours 58 minutes and receive same day shipping

Specs
Sold in Quantity:
Each
Finish:
-
Material Type:
Stainless Steel
Garage Sale:
No
Overall Length:
-
Overall Thickness:
-
Inside Diameter:
-
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps
Stainless Steel Exhaust/Muffler Tube Clamps

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These superior quality muffler tube clamps/u-bolts are 100% stainless steel. They are ideal for any exhaust system and feature a saddle-type clamp for added strength. Choose plain or polished. Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" sizes available. Thread size on tube clamps is 8mm-1.25.

  • Stainless steel
  • Ideal for any exhaust system 
  • Saddle-type clamp for added strength
  • Thread size on clamps is 8mm-1.25
  • Choose plain or polished
  • Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" pipe diameter

Customer Reviews

Rated 4.9 out of 5 by 10 reviewers.
RATING BREAKDOWN
10 reviews
5 Stars
9
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

abstractical Art
Verified Purchaser
Verified Reviewer
belleville, michigan

beautiful clamp

June 29, 2015
well constructed clamp, made in Taiwan, not China, better construction and detail. they offer polished, but i polish my own and they came out perfect. would recommend and use again
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Munster57
Verified Purchaser
Cleveland, OH, USA

A lot closer tolerances then standard ex

March 30, 2015
Very nice clamp construction wise but with stainless they are a lot closer to their size then a sloppy standard clamp. Must measure exactly what size you need.
Pros:
  • looks very clean, will last a lot longer
Cons:
  • measurements need to be exact no room for error
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Gatz
Verified Purchaser
Ohio, USA

Excellent product.

March 04, 2015
The clamps were exactly what I need. Size of 1 7/8" is not easy to find in stainless steel, and at a great price. Thanks, Bob D.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

54Chevy48
Verified Purchaser
Michigan

Looks very nice.

September 28, 2014
A great looking u-bolt for bolting the oil filter onto a 1954 Chevy intake manifold.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

SolarSteve
Verified Purchaser
Sandpoint, Idaho

clean looking bracket, hard to find

August 02, 2013
I was setting up a transport for two electric bicycles on an RV. I needed a tab on the bikes for a support on the steering shaft connecting to the rack by a padlock. I welded the rack support arm but did not want to weld on the bike's alloy steering shaft. This bracket fit perfectly (no other source had this size) and will never rust or mar the new bike's appearance. A stainless steel strap added to the clamp under the nuts extended out 2 inches to make the padlock hole. The nuts on the clamp were spot welded to lock-on after trimming the U-bolt, for good security..
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JDNut
Verified Purchaser

Great product, real quality

June 06, 2013
I got these for a stainless steel exhaust to attach stainless extensions for stacks on a pulling tractor so they are exposed and visible at all times. Worked out great and very good looking.
Pros:
  • TOP Quality
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

drakede2
Verified Purchaser
Indianapolis, IN

Nice muffler clamp

May 21, 2012
It's a muffler clamp, does what it is supposed to and looks great in stainless.
Pros:
  • Easy To Install
  • Adds Style
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

diceman
Verified Purchaser
West Texas

Very high quality at a reasonable price

November 26, 2010
Low maintenance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

redhog
Strongsville Ohio

this is one great clamp

May 07, 2010
I needed to keep my steering colum drop as close to stock as i could and this clamp fit perfect for what i need to accomplish on my 31 Chevy coupe.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

alabamahotrod1930
Huntsville Al

great price and works great

February 28, 2010
just what you need to finsh a job
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 6 answers

2 answers

other size details/ dimentions I assume the 2.25" dimention is internal diameter --- what is the side length of the clamp?

DeeR
Rome, GA, USA
August 12, 2014

other size details/ dimentions I assume the 2.25" dimention is internal diameter --- what is the side length of the clamp?

Answers

March 31, 2015
Munster57
That would be your standard 21/4 inch clamp but the side length is slightly shorter then the standard cheap clamp
August 14, 2014
EricM
The width across the formed base of the clamp is 3 1/4". Total height of the U bolt is also 3 1/4"
1 answers

Would you clarify what the sizes are on this item? Inches, Cm, mm? Thanks.

March 27, 2011

Would you clarify what the sizes are on this item? Inches, Cm, mm? Thanks.

Answers

March 29, 2011
Tech Support
The sizes are in inches.
3 answers

Would it take a 3/8 inch nut if the one that comes with the clamp broke?

steve1
October 17, 2012

Would it take a 3/8 inch nut if the one that comes with the clamp broke?

Answers

March 31, 2015
Munster57
Yes, the thread pitch would be considered 3/8-16 as far as the replacement nut you would need
August 03, 2013
SolarSteve
I believe it was 5/16 thread, not 3/8 on the one I used, and any stainless nut such as used on golf cart batteries will do it.
October 18, 2012
Jason
This clamp uses a M8-1.25 thread pitch nut
Page 1 of 1

You may also be interested in:

Dynatech® 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
(Part #31178970250)
                        

Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

One clamp per package.

Dynatech® 789-70300 Stepped Band Tube Clamp, 3 Inch
(Part #31178970300)
                        

Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

One clamp per package.