Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Stainless Steel Exhaust Bend Kit, 2-1/2 Inch

Free Shipping Free Shipping
Specs
Sold in Quantity:
Kit
Finish:
Natural
Material Type:
Stainless Steel
Hardware Included:
No
Mandrel Bent:
Yes
Tube O.D.:
2.50
Wall Thickness:
.07
Notes
Includes 4 each: 45* bends, 90* bends, 180* bends, and 48" lengths. No clamps or hangers are included.
Stainless Steel Exhaust Bend Kit, 2-1/2 Inch

Click image to enlarge

Details

Reviews (4)

Q & A (1)

What's in the Box

Info

Sometimes its just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish.

  • Four 48" Straight Pipes
  • Four 90° Pipes
  • Four 45° Pipes 
  • Four 180° U-Bends

Item Details

Built of T304 grade stainless steel which is .065 wall thickness.

Customer Reviews

Rated 5 out of 5 by 4 reviewers.
RATING BREAKDOWN
4 reviews
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Ken' 37 ford
Verified Purchaser
Verified Reviewer
Mansfield, Tx

Stainless exhaust

March 13, 2016
Strong material, use cut off saw or grinder with abrasive blade. Pre bent angles allowed tight turns and rolling offsets.
Cons:
  • Slow Going
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Gumby
Verified Purchaser
Verified Reviewer
Dallas, Tx

Excellent quality product

October 13, 2015
I got this tubing kit quickly from Speedway. The bends are all bagged in a big box and the straight pieces are in a long box of their own. The finish on them is excellent, especially on the unbent tubing. It's as close as polished as I've seen and I wasn't really expecting that. I've cut up several of the bends to build my system and they're not deformed (ovaled) and the outside radius walls of them are still plenty thick to weld and not worry about cracking or anything. I priced 304 stainless 2.5" kits from every website I could find it and this was by far the cheapest. Plus the number of bends and tubing you get is is more than what I could find elsewhere. I probably have enough to do another single system after installing this as dual exhaust on my 71 GMC. Keep in mind this is a legit 304 SS exhaust kit, not 409 which honestly I would rather use aluminized (which I wish Speedway carried IMO). The flared ends are sized well and slip together easily, but without too much slop that would be a pain to clamp. Note, this is a raw tubing kit which definitely takes some fabrication to install into a vehicle. I managed to run both sides all the way to the mufflers (under the bed) without having to cut up many bends, but building the tailpipes takes a little work. This kit has so many 45 and 90* bends though you definitely won't run out on any normal car or truck. I'd definitely recommend this over the raw steel kit since it's not at all coated and would likely rust out. This kit will likely outlast the rest of your vehicle.
Pros:
  • Packaged well
  • More Than Enough For Job
  • Flared Ends Are Nice
  • Good price
  • The Bends Are Uniform
  • Nice Finish
Cons:
  • No Smaller Kit Offering
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

jackg
hudson wi

1940 ford

December 25, 2013
this is a very nice kit, looks nice, and firs well
Pros:
  • nice pipe
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

OmegaHotRods
Toronto, ON, Canada

I build hot rods , and I love stainless

September 27, 2013
Most muffler shops now will not try to bend 16 gauge 304 SS. this kit is every thing you could ask for , It welds great with a Miller 211 Mig and SS wire . Just leave about 1/32 gap between pipes ,watch your settings and you,ll have no burn through. The product has perfect bends , great finish ,almost like polished . I would recommend this product to anyone !
Pros:
  • resonable price
  • hey its ss
  • finish & fit
Cons:
  • None for me
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 2 answers

2 answers

Are these mandrel Bends?

RocketsGarage
Sunnyside, WA, USA
November 14, 2012

Are these mandrel Bends?

Answers

September 28, 2013
OmegaHotRods
Yes , no kinks or seams anywhere .
November 14, 2012
Jason
Thiis is a unpolished T304 stainless with .065" wall thickness and does have mandrel bends
Page 1 of 1

You may also be interested in:

  • Stainless Steel Exhaust/Muffler Tube Clamps Stainless Steel Exhaust/Muffler Tube Clamps
    (12)
    $7.99
    Compare
  • Mild Steel Exhaust Bend Kit, 2-1/2 Inch Mild Steel Exhaust Bend Kit, 2-1/2 Inch
    (59)
    $139.99
    Compare
  • Dynatech® 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch Dynatech® 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
    (0)
    $29.99
    Compare
  • Stainless Steel Exhaust Bend, 45 Degree, 2-1/2 Inch Stainless Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
    (2)
    $29.99
    Compare
Suggestions For You