Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Spoon Throttle Pedal, Chrome

SAME DAY SHIPPING!

Specs
Centerline of Holes:
1.88
Material Type:
Steel
Overall Width:
1.75
Overall Length:
11.75
Sold in Quantity:
Each
Finish:
Chrome
Garage Sale:
No
Notes
Length of arm from pivot point to top cable mounting hole center is 5.13". Length of arm from pivot point to center of pedal is 6.63". Three cable mounting holes 1/2" apart.

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

You can't go wrong with this chrome plated steel throttle pedal. Splined pivot hub allows easy indexing of arm for use in nearly any vehicle.

Notes

  1. The arm on the side with the small set screw (1.5 mm) is splined to the central shaft. This allows the installer to tailor the arm/pedal angle to suit their installation.  
  2. The countersunk capscrew (4 mm) which retains the side arm is installed at the factory with a small impact tool and can be quite tight. A palm-sized (or butterfly) impact wrench, or an allen wrench with a longer handle than is provided with the gas pedal, may be needed to remove this retaining screw for the first time.

You may also be interested in:

Speedway Aluminum Spoon Pedal
                        

Fully adjustable gas pedal and arm angle for custom applications. Polished aluminum construction.

  • Throttle Pedal Arm:  7-3/8"
  • Cable Arm:  5.3"
  • Mount Hole Centers:  1-5/8"

916-55010 Instructions (PDF)

Speedway Hot Rod Pedal, Scalloped Arm
                        The angle of this scalloped throttle pedal is fully adjustable. Chrome steel construction with a rubber pad insert. Features 3 cable mounting holes 1/2" apart.
                    
Mr Roadster Hot Rod Pedal, Solid Arm
                        

Fully adjusts angle of pedal and arm. Rubber pad inset. New sloted arm design. Chrome.

This pedal is 6" from pivot to the center of the pedal pad on the spoon.

Lokar Universal Black Throttle Cable Kit
                        

Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

491-1000U Instructions (PDF)

Lokar BAG-6151 lokar Lakester Chrome Throttle Pedal
                        This pedal has the same quality you have come to expect from Lokar.  The removable  lower arm is splined for versatility in mounting to the right or left of  the mounting bracket.  Lakester pedals feature curved pads and arms.
  • Vintage race inspired look
  • Chrome plated
Spoon Throttle Pedal, Black Chrome
                        You can't go wrong with this sleek black chrome steel throttle pedal. Splined pivot hub allows easy indexing of arm for use in nearly any vehicle.
                    
Lokar XTC-1000HT Midnight Series Hi-Tech Throttle Cable, 24 Inch
                        These Lokar Midnight Series hi-tech throttle cables have a  PTFE inner liner and a black stainless steel outer covering, along with  aluminum clevis ends for smooth, no-bind cable operation. They can be  easily adapted to fit most gas pedals and throttle assemblies. 
  • 24" long
  • Universal
  • Black, braided stainless steel cable Jacket
  • Braided stainless wire
  • End Fittings Included
Lokar DP-1000HT 24 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
                        

These Lokar Duo-Pak throttle cables have a PTFE inner liner and a stainless steel outer covering, along with aluminum Clevis ends for smooth, no-bind cable operation. The cables easily adapt to most gas pedals and throttle assemblies. They include a throttle return spring and mounting bracket to complete installation.

  • 24" cable length
  • Braided stainless steel cable jacket
  • Natural finish
  • Braided stainless wire cable
  • Brackets included
  • End fittings included
  • Sold as a kit

 

Lokar SPO-6070 Steel Spoon Throttle Pedal Assembly, Chrome Finish
                        

Nostalgic hot rod style is exhibited with Lokar's Spoon Throttle Pedal. The pedal is designed with the same quality as demonstrated in other Lokar Throttle assemblies. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

  • Nostalgic hot rod style
  • Quality steel construction
  • Splined lower arm can be mounted on either side of bracket
  • Chrome finish 

49106070 Installation Instructions (PDF)

Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
                        Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits.  The kit is   equipped with a Throttle Cable in stainless housing plus our  Stainless  Steel Carburetor Bracket and Return Spring Kit.  Duo-Pak only  available  for carbureted applications with Holley, Edelbrock, AFB,  Quadrajet and  In-Line Dual Quad carbs.
                    
Lokar TCP-1000HT Polished Hi-Tech Throttle Cable, 24 Inch
                        

Looking for more shine in your engine compartment? Try Lokar's 24" Polished Hi-Tech Throttle Cables.  They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

 

Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
                        

Lokar's chrome steel brake pedal cover is EXTRA LARGE for those seeking more substance under foot.  The brake pedal pads mount with a 1/2 - 20 stud built into the back of the pad.

  • Chrome finish
  • Designed after OEM pedals
  • EXTRA LARGE for those seeking more substance under foot
  • Mount with a 1/2 - 20 stud built into the back of the pad
  • 3-3/4" x 2-3/4"

Brake and Clutch Pedal Pad Installation Instructions (PDF)

Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
                        

These oval billet aluminum brake pads come in a standard size. The brake pedal covers are designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in the kit. Can be mounted centered or off center.

  • 1/2 - 20 thread with stud included
  • Mounted either centered or off center
  • 3-3/4" x 1-3/4"

4916107 Installation Instructions (PDF)

Lokar BAG-6152 Lakester Steel Brake/Clutch Pedal Pad, Chromed
                        

Lakester hot rod pedal styling is a continuation of the many nostalgic products offered at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pedal pad. Lakester pedals feature curved pads and arms.

These new nostalgic style pedals are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

  • Hot rod styling
  • Chrome finish
  • Quality steel construction
  • Quick and easy installation
  • 2" x 3-1/2"

4916152 Installation Instructions (PDF)

 

Lokar BAG-6153 Lakester Steel Automatic Brake Pedal Pad, Chromed
                        

Lakester hot rod pedal styling is a continuation of the many nostalgic products we offer at Lokar. The brake pedal covers have the same quality you have come to expect from its sister steel spoon throttle pedal and round brake/clutch pad. Lakester pedals feature curved pads and arms.

These new nostalgic style pedal covers are available in a chromed finish. This unique pedal design will give your favorite vehicle an all new look.

  • Hot rod styling
  • Quality steel construction
  • No drilling is needed
  • Quick and easy installation
  • Chromed finish
  • 5" x 2-3/4"

4916153 Installation Instructions (PDF)

Lokar Hi-Tech Stainless Throttle Cable Kit
                        

Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions.