Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long

SAME DAY SHIPPING! Order within the next 15 hours 4 minutes and receive same day shipping

Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long
Split Wire Loom Conduit Tubing, 3/8 Inch Diameter, 12 Ft. Long

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

  • 12 ft. long
  • 3/8" diameter
  • Plastic split conduit
  • More professional appearance
  • Groups and protects wires against damage 
  • Retains wires under flex and adjustment
  • Comes with zip-ties to secure wire loom
  • Choose: black, dark blue, purple, red, or yellow

Customer Reviews

Rated 5 out of 5 by 4 reviewers.
RATING BREAKDOWN
4 reviews
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

30birdy
Verified Purchaser

Great product

August 21, 2014
I was looking for a darker blue. This was perfect since all I could find where lighter blue looms.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

romanoff
Verified Purchaser

Just as I expected

October 28, 2013
Simple product delivered speedily and safely without any hassles
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ubmc
Verified Purchaser
Harris, MN, USA

wire loom

December 08, 2012
very flexible and durable easy to work with and the clamps to hold it in place are very helpful.
Pros:
  • Good stuff
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Doug
Verified Purchaser
Willoughby, Oh.

Great for the wire bundles

June 03, 2011
Low cost
Pros:
  • Enough for whole car
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Split Wire Loom Conduit Tubing, 1/4 Inch Diameter, 20 Ft. Long
(Part #91050025)
                        

This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

  • 20 ft. long
  • 1/4" diameter
  • Plastic split conduit
  • More professional appearance
  • Groups and protects wires against damage 
  • Retains wires under flex and adjustment
  • Comes with zip-ties to secure wire loom
  • Choose: black, dark blue, purple, red, or yellow
Split Wire Loom Conduit Tubing, 1/2 Inch Diameter, 8 Ft. Long
(Part #91050050)
                        

This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

  • 8 ft. long
  • 1/2" diameter
  • Plastic split conduit
  • More professional appearance
  • Groups and protects wires against damage 
  • Retains wires under flex and adjustment
  • Comes with zip-ties to secure wire loom
  • Choose: black, dark blue, purple, red, or yellow
Split Wire Loom Conduit Tubing, 3/4 Inch Diameter, 6 Ft. Long
(Part #91050075)
                        

This plastic split wire loom allows you to clean up that ugly wiring under the hood for a more professional look. This tubing will group and protect your wires from damage.  Simply lay out and insert wires, which will remain inside even with flex.  Choose from 5 colors to customize your engine bay: black, dark blue, purple, red, or yellow. 

  • 6 ft. long
  • 3/4" diameter
  • Plastic split conduit
  • More professional appearance
  • Groups and protects wires against damage 
  • Retains wires under flex and adjustment
  • Comes with zip-ties to secure wire loom
  • Choose: black, dark blue, purple, red, or yellow
DEi 010833 Hi-Temp Heat Shrink Tubing Wire Insulation, 12MM x 4 Foot
(Part #35610833)
                        

These heat shrink tubing kits feature excellent water-tight wire protection for automotive, marine use, and more!  They use professional grade military spec flexible polyolefin tubing to provide excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.

  • Kit includes: 12MM x 4' roll
  • Offers clean professional look
  • Meets MIL Spec DTL-23053/5C
  • 3:1 shrink ratio
  • Flame retardant
  • Alternate to plastic ties & tape
  • Use to insulate wires, connections, terminals, wire splicing & more
  • Thick wall construction & remains flexible
  • Operating temp range: -67°F to 275°F
  • Max Operating temp: 394°F for short duration (30 to 60 mins)
  • Easy to install: Apply at 120 to 180°F using heat gun
DEi 010838 Hi-Temp Heat Shrink Tubing Wire Insulation, 6MM x 4 Foot
(Part #35610838)
                        
These heat shrink tubing kits feature excellent water-tight wire protection for automotive, marine use, and more!  They use professional grade military spec flexible polyolefin tubing to provide excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.

  • Kit includes: 6MM x 4' roll
  • Offers clean professional look
  • Meets MIL Spec DTL-23053/5C
  • 3:1 shrink ratio
  • Flame retardant
  • Alternate to plastic ties & tape
  • Use to insulate wires, connections, terminals, wire splicing & more
  • Thick wall construction & remains flexible
  • Operating temp range: -67°F to 275°F
  • Max Operating temp: 394°F for short duration (30 to 60 mins)
  • Easy to install: Apply at 120 to 180°F using heat gun
DEi 010832 Hi-Temp Heat Shrink Tubing Wire Insulation, 9MM X 4 Foot
(Part #35610832)
                        

These heat shrink tubing kits feature excellent water-tight wire protection for automotive, marine use, and more!  They use professional grade military spec flexible polyolefin tubing to provide excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.

  • Kit includes: 9MM x 4' roll
  • Offers clean professional look
  • Meets MIL Spec DTL-23053/5C
  • 3:1 shrink ratio
  • Flame retardant
  • Alternate to plastic ties & tape
  • Use to insulate wires, connections, terminals, wire splicing & more
  • Thick wall construction & remains flexible
  • Operating temp range: -67°F to 275°F
  • Max Operating temp: 394°F for short duration (30 to 60 mins)
  • Easy to install: Apply at 120 to 180°F using heat gun

 

DEi 010834 Hi-Temp Heat Shrink Tubing Wire Insulation, 18MM x 4 Foot
(Part #35610834)
                        

These heat shrink tubing kits feature excellent water-tight wire protection for automotive, marine use, and more!  They use professional grade military spec flexible polyolefin tubing to provide excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.

  • Kit includes: 18MM x 4' roll
  • Offers clean professional look
  • Meets MIL Spec DTL-23053/5C
  • 3:1 shrink ratio
  • Flame retardant
  • Alternate to plastic ties & tape
  • Use to insulate wires, connections, terminals, wire splicing & more
  • Thick wall construction & remains flexible
  • Operating temp range: -67°F to 275°F
  • Max Operating temp: 394°F for short duration (30 to 60 mins)
  • Easy to install: Apply at 120 to 180°F using heat gun
DEi 010835 Hi-Temp Heat Shrink Tubing Wire Insulation, 24MM x 4 Foot
(Part #35610835)
                        

These heat shrink tubing kits feature excellent water-tight wire protection for automotive, marine use, and more!  They use professional grade military spec flexible polyolefin tubing to provide excellent electrical insulation, protection from dirt, dust, solvents, and foreign materials as well as providing strain relief. Over expanded tubing easily fits over the end of wires and connectors and shrinks down to 33% of it’s original diameter for a snug water-tight protective seal without a reduction in tube length.

Hi-Temp Shrink Tubes can be used to insulate wires, wire splicing, connections, terminals and meets the material functional properties of Military Spec DTL-23053/5C.

  • Kit includes: 24MM x 4' roll
  • Offers clean professional look
  • Meets MIL Spec DTL-23053/5C
  • 3:1 shrink ratio
  • Flame retardant
  • Alternate to plastic ties & tape
  • Use to insulate wires, connections, terminals, wire splicing & more
  • Thick wall construction & remains flexible
  • Operating temp range: -67°F to 275°F
  • Max Operating temp: 394°F for short duration (30 to 60 mins)
  • Easy to install: Apply at 120 to 180°F using heat gun
Painless 70902 1/2 Inch Powerbraid Split Braided Sleeving, 10 Foot
(Part #91070902)
                        

This PowerBraid from Painless Performance is very flexible. Its 25% overlap gives it optimum wire protection without the need for any additional fasteners.

  • Cut and Abrasion Resistant
  • Continuous Temperature Rating -94 Degrees to 257 Degrees F
  • Melting Point 482 Degrees F
  • Made in the USA
Painless 70957 1/4 Inch ClassicBraid Wire Sleeving, 20 Feet
(Part #91070957)
                        

This 1/4" ClassicBraid from Painless Performance has a smooth new look that will transform your engine and give you that factory installed look. Its woven construction gives you excellent blockage against mud and dirt while giving you adequate drainage for optimum wiring protection.

  • Made in the USA
  • Continuous Temperature Rating -94° to 257°F
  • Melting Point 482°F
  • Resistant to Automotive Chemicals & Fluids
  • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
  • 20' long
Painless 70958 1/2 Inch ClassicBraid Wire Sleeving, 10 Feet
(Part #91070958)
                        

This 1/2" ClassicBraid from Painless Performance has a smooth new look that will transform your engine and give you that factory installed look. Its woven construction gives you excellent blockage against mud and dirt while giving you adequate drainage for optimum wiring protection.

  • Made in the USA
  • Continuous Temperature Rating -94° to 257°F
  • Melting Point 482°F
  • Resistant to Automotive Chemicals & Fluids
  • Great For Auto, Marine, RV, Aircraft, Power Sports, & More
  • 10' long
Painless 70901 1/4 Inch PowerBraid Split Braided wire Sleeving, 20 Feet
(Part #910709010)
                        

This 1/4" semi-rigid PowerBraid from Painless Performance is very flexible. Its 25% overlap allows for wire protection without the need for extra fasteners.

  • Cut and Abrasion Resistant
  • 25% Overlap
  • Temperature Rating from -94° to 257 °F
  • Melting Point 482°F
  • Made in USA