Speedway Transmission Mount E-Brake Boots
Click image to enlarge
Q & A
What's in the Box
Base ring is 6-1/4" x 2-1/2" outside diameter and 5-1/4" x 1-1/2" inside diameter.
No questions have been asked.
You may also be interested in:
Lokar EHB-7011 Trans Mount Emergency Hand Brake, 11 InchMore Info
Lokar EC-80TU Trans Mount Emergency Brake CablesMore Info
Lokar 70-EHBT Trans Mount E-Brake Boot w/ Stainless RingMore Info
Lokar 70-BHBT Billet Hand Brake Boot Ring with Transmount Boot$71.95Price: $53.99More Info
Lokar X70-BHBT Midnight Series Hand Brake Boot Ring w/Transmount Boot$71.95Price: $56.99More Info
Lokar EHB-7016 Trans Mount Emergency Hand Brake, 16 InchMore Info
Transmission mount emergency hand brake lever assembly. Ratchet cut gear plate and lock are heat treated for strength and safety. Lever's geometric design allows for comfortable leverage operation. E brake handle mounts to your Lokar shifter.
Note: 11" Hand brake is suggested to be used with 16" and shorter shifters. Use 16" hand brake with 23" and taller shifters.
The tailmount, floor mount and cable operated transmission shifters do not offer the capability of mounting the transmount hand brake assemblies. For these type of transmission shifters, the floor mounted hand brake assembly should be utilized.
Transmount E-Brake Cables are designed for use with Transmount Emergency Hand Brakes and includes bracket for mounting cables to hand brake. Kit comes equipped with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Outer housing is designed with specially extruded liner for extended life of the cable. Stainless steel inner cable resists moisture.
Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Kit includes two 8 foot black outer housings that “U-Cut-to-Fit”.
*NOTE*: If using these cables with Ford Explorer-style (such as our 910-31938), Wilwood, or late model Corvette rear disc brakes with internal shoe-type emergency brake, you will need our nut kit listed 916-41021 and E-Brake clevis 491-81FC.
Each Lokar transmission mount emergency brake boot kit includes a black naugahyde boot, polished stainless base ring and stainless screws.
The dimensions for this boot ring are 2-1/2" x 6-1/4" outside diameter, and 1-1/2" x 5-1/4" inside diameter.
- Lokar shifter boots are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. Available in transmount style or floor mount style. Boot hugs the hand brake lever.
- Black Naugahyde
- Boot Hugs The Hand Brake Lever
- Made In The U.S.A.
- Lifetime Warranty
Lokar Shifter and Hand Brake Boots are black Naugahyde and all sets include a boot, polished stainless base ring, OR billet aluminum ring with ball-milled edge and stainless screws. Billet aluminum rings also available in black anodized.
- Our Classic Shifter Boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever.
- It also includes a foam rubber seal to eliminate air flow from the floor through the boot.
- The Hand Brake Boots are available in transmount or floor mount styles.
- All boots hug the shifter lever and there are no unsightly pull ties or laces.
Lokar transmission mount emergency hand brake lever assembly features a ratchet-cut gear plate and lock that are heat treated for strength and safety. Lever's geometric design allows for comfortable leverage operation. E brake handle mounts to a Lokar shifter.
Note: 16" Hand brake is suggested to be used with 23" and taller shifters. Use 11" hand brake with 16" and shorter shifters.
The tailmount, floor mount, and cable operated transmission shifters do not offer the capability of mounting the transmount hand brake assemblies. For these type of transmission shifters, the floor mounted hand brake assembly should be utilized.