Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Speedway Throttle Assembly

SAME DAY SHIPPING! Order within the next 19 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Overall Height:
7.50
Overall Width:
3.00
Overall Length:
6.00
Color:
Silver
Sold in Quantity:
Kit
Finish:
Natural
Hole Diameter:
29
Cable length:
48
Pedal Length:
8.50
MFG. Part #:
720-4103
Garage Sale:
No
Pedal Width:
2.50
Notes
Mounting base is 2.5" x 6" x 1/4" thick. Pedal rests at 45 degree angle to base. Has 2" travel.
Speedway Throttle AssemblySpeedway Throttle Assembly
Speedway Throttle Assembly

Click image to enlarge

Speeday Motors Logo
X
Speedway Throttle Assembly

Details

Reviews

Q & A

What's in the Box

Full cam-slot cable action throttle assembly. Cast aluminum base and textured pedal. Assembly includes heavy duty 48" cable and housing clamp.

Notes

Cable Installation:

  1. Remove the throttle pedal rod.
  2. Place "looped" end of supplied cable between the nylon bushing and washer.
  3. Clamp cable on pedal assembly with the through-bolt hole.
  4. The other end of the cable has a small insert that can be used on a carb linkage rod and clamps the cable in place.

Specs


You may also be interested in:

Lokar FMG-6098 Eliminator Floor Mount Throttle Pedal, Billet Alum
                        

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Pedal pad is 2” by 6-3/4”
  • Pad is parallelogram in shape and NOT rectangle
  • Brushed billet aluminum finish

Eliminator Throttle Pedal Installation Instructions (PDF)

 

Offenhauser 6244 Aluminum Throttle Pedal
                        

Universal cast aluminum pedals are fully adjustable and have a 6-7/8" arm. Throttle cables not included. We recommend universal cable linkage #560-6230.

Cable clamp sleeve is included for attachment to the throttle cable.

  • Mounting base is 5-1/16” tall, 1-1/8” wide, and ¼” thick with 3 mounting hole options
  • Mounting surface to center of pivot point is ½”
  • Upper arm pivot hole to center of cable attachment hole is 3¼”
  • Lower pedal arm is 8-1/8” from pivot point center to end of arm and has 4 mount holes for the pedal pad
  • Pedal pad has non slip diamond pattern and at bottom hole on arm extends past arm 1”
  • Pedal pad is 1-1/8” wide, 2-5/8” tall, and ¼” thick
  • Lower arm has 4 mount holes to change angle with the upper arm
Big Foot Floor Mount Throttle Pedal
                        Heavy duty construction. With mount and return spring. This pedal is designed to work with a mechanical throttle linkage. However, the pedal may be modified by the installer to make use of a throttle cable if needed.
                    
Barefoot Gas Pedal Cover
                        A footprint gas pedal chrome detail for your project. Mounts over your original pedal using included bracket.
                    
Speedway Carburetor Bracket and Return Springs
                        Stainless throttle cable bracket & spring set. Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quad carburetors. Dual spring design provides a safe, reliable throttle return when compared to single spring set-ups.

Note: There is no provision in this bracket for an automatic transmission.
Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
                        

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Black finish

Eliminator Throttle Pedal Installation Instructions (PDF)

Lokar FMG-6097 Eliminator Floor Mount Throttle Pedal, Billet Alum
                        

Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

  • Recipient of NSRA best new product
  • Eliminates routing cables through firewall
  • Billet aluminum splined adjustable shaft
  • Stainless steel "under-the-floor" cable mounting bracket
  • Mounts in multiple positions
  • Built-in pedal travel stops

Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

Lokar S-1034 Carb End Assembly for Lokar Throttle Cables
                        Lokar S-1034 Replacement Carb end assembly for Lokar Throttle Cables.