SAME DAY SHIPPING!
- Time remaining:
Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Plain
Open Kit Components
- Selection of individual components may be necessary for kit purchase.
|
Click image to enlarge
Our Techs also Suggest the Following:
Radius Rod/Four-Bar Frame Mounting Brackets, 5/8 Hole, 4-3/8 Inch
|
Speedway 1928-1948 Ford Forged Spindles w/ Kingpins
Item Details:
Includes forged spindles with kingpins fit to spindles.
|
You May Also Be Interested In...
-
More Info
Pro-Blend 1720 Anti-Seize Compound
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit. - Defies contact of dissimilar or like metals
- Not affected by heat, moisture, salt water, or corrosion
Learn why using anti-seize is so important in our tech article, Installing New Hardware.
-
More Info
Ford Model T - 1934 Front Spring U-Bolt Kit, Plain Steel
Use with original or reproduction Model "T" thru '34 Ford crossmembers. Includes two U-bolts with nuts, one spacer plate and one lower bracket.
-
More Info
Spring-Over 4 Inch Drop Front End for Ford Spindles, Chrome
For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs.
Kit includes: - Two 1-3/4" spring shackles with nylon bushings
- Two spring pivots
- 26" 4-leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
- Two axle brackets
- Tube axle, 48" eye-to-eye, 4" drop
- Two 27" radius rods
- Four clevises with jam nuts and bolts
- Two 5/8" heims with jam nuts
- Spring U-bolts sold separately
Front Axle/Suspension Tech Tips (GIF)
-
More Info
Ford Front Axle Steering & Brake Kit, 48 Inch Axle
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware. - For 48" kingpin-to-kingpin axles
- Traditional steering arm for left front wheel NOT included with Traditional steering kit
- Available with 5x4.5" or 5x4.75" hubs
Spindle Identification Guide (GIF)
-
More Info
Ford Wilwood Front Brake & Steering Kits - 48 Inch Axle
Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders. Features these Wilwood components: - 4-piston Forged Billet Dynalite Calipers
- 10-3/4" diameter x .38" thick solid steel rotors - black finish
- Lightweight clear-anodized aluminum hubs
Choose: - Traditional or cross steering
- Chrome or plain steering arms and tie rod cross bar
Traditional steering arm for left front wheel NOT included with kit.
-
More Info
Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Chrome
For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. Kit includes: - Two 1-3/4" spring shackles with nylon bushings
- Two spring pivots
- 26" 4 leaf Super Glide™ spring, 1-3/4" wide
- Two axle brackets
- Tube axle, 48" eye-to-eye, 6" drop
- Two 27" radius rods
- Four clevises with jam nuts and bolts
- Two 5/8" heims with jam nuts
- Spring U-bolts sold separately
-
More Info
Speedway Spring-Over 6 Inch Drop Front End for Ford Spindles, Stainless
For T's and early 1930's street rods using 1937-48 Ford passenger car spindles. Maximum car weight is 2500 lbs. Kit includes: - Two 1-3/4" spring shackles with nylon bushings
- Two spring pivots
- 26" 4 leaf Super Glide™ spring, 1-3/4" wide (chrome spring used on stainless steel kit)
- Two axle brackets
- Tube axle, 48" eye-to-eye, 6" drop
- Two 27" radius rods
- Four clevises with jam nuts and bolts
- Two 5/8" heims with jam nuts
- Spring U-bolts sold separately
|