Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Speedway Small Cobra Style Gas Cap

SAME DAY SHIPPING! Order within the next 13 hours 40 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Polished
Mounted Height:
1.50
Hose ID:
2.00
Bolt Hole Pattern:
1.73" x 2.57"
Gasket(s) Included:
Yes
Hardware Included:
Yes
Garage Sale:
No
Notes
Cap O.D. is 2.50"
Speedway Small Cobra Style Gas Cap
Speedway Small Cobra Style Gas Cap
Speedway Small Cobra Style Gas Cap

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

  • Fully polished aluminum construction
  • Small Cobra Gas Cap is vented
  • Latch style flip top cap 
  • Cap measures 2-1/2" diameter
  • Hose fitting measures 2" diameter

Customer Reviews

Rated 5 out of 5 by 8 reviewers.
RATING BREAKDOWN
8 reviews
5 Stars
8
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

wiggshop
Verified Purchaser
foley alabama
Product Rating

good craftsman ship

October 12, 2014
great product seals good and easy to install with great features.
Pros:
  • small fits tight places
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

farawaypapa
Verified Purchaser
susanville ca
Product Rating

wrong cap

October 08, 2014
the cap was great except my cap was threaded so I needed one like that. thank you gary cox
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

johnny101
Verified Purchaser
port orange fl usa
Product Rating

sm one looks great

August 24, 2014
but cannot get it to open up, am sending back for a new one plus the lg one is way to big to install on top lt 1/4 panel on model a, shipping on 8/26/14 thanks john davis
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Turk182
MS. Gulf Coast
Product Rating

Awesome produce and great style.

September 19, 2013
I was looking for a cool way to get fuel in my 23 C Cab and what better way than a Small Cobra Fuel Car? I love the look and price.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Ron
Verified Purchaser
Waxahachie, Texas
Product Rating

Great product, show quality, works good

September 15, 2012
Bolted flat and at a good angle on the rear, top quarter panel of my 'glass 33 ford. The only VENTED cap I could find that didn't require extenive body work. Looks cool- Old School '50s- '60s style.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

A.T.
Verified Purchaser
Colo. Spgs. Colo.
Product Rating

Perfect, as always!

May 01, 2012
I've purchased a number of products from Speedway and each has been exactly as advertised. The folks in the phone orderiing section are just the best.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

jcapps
Verified Purchaser
LA, CA
Product Rating

Very happy

December 04, 2011
Using this on my coupe
Pros:
  • Good Quality
  • Nicely polished
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

bammer
Verified Purchaser
dansville ny
Product Rating

just what we needed

May 14, 2012
mounted in the wood bed of my 51 chevy pick and fit perfict with the rear mounted gas tank
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
6179020

Product Q&A

8 questions : 11 answers

2 answers

Is this cap a venting cap Do I need to have a vent line on my fuel tank or is this cap self venting

28sedan
Calgary
September 08, 2014

Is this cap a venting cap Do I need to have a vent line on my fuel tank or is this cap self venting

Answers

October 09, 2014
farawaypapa
yes
September 09, 2014
EricM
This is a vented cap so venting the tank with another source would not be required.
2 answers

What is the neck made of? Can it be cut off for flush mount?

Joninfenton
Michigan, USA
March 22, 2014

What is the neck made of? Can it be cut off for flush mount?

Answers

October 09, 2014
farawaypapa
no
March 24, 2014
EricM
This filler neck is cast aluminum. This would not be an easy cap to make flush mounted.
2 answers

What are the outside dimensions of the bolt on flange?

Joninfenton
Michigan, USA
March 22, 2014

What are the outside dimensions of the bolt on flange?

Answers

October 09, 2014
farawaypapa
no bolts, it threads directly into the tank
March 24, 2014
EricM
The flange measures 3 3/8" x 2 1/2" overall.
1 answers

Can this cap assembly be directly mounted to a flat top metal fuel tank? Will the rubber seal deteriorate because of the fuel. I just want to make sure this would make a solid seal to the tank. If this won't work what are my other options for a small filler neck and cap... preferably a gasket and bolted connection but a weld in might be the other alternative.

Rodmods
Phoenix, AZ, USA
March 09, 2014

Can this cap assembly be directly mounted to a flat top metal fuel tank? Will the rubber seal deteriorate because of the fuel. I just want to make sure this would make a solid seal to the tank. If this won't work what are my other options for a small filler neck and cap... preferably a gasket and bolted connection but a weld in might be the other alternative.

Answers

March 10, 2014
EricM
Yes this filler would work to bolt to the top of a fuel tank. If mounting this directly to the tank you would want to cut the 2" hose connection off of the back side so that you can fill the tank completely.
1 answers

Is the 2" dia. hose fitting ID or OD?

WillieP
Waxhaw, NC 28173, USA
November 24, 2013

Is the 2" dia. hose fitting ID or OD?

Answers

November 25, 2013
EricM
The hose that you use to connect this gas cap to your tank will need to have a 2" inside diameter.
1 answers

Does the cap vent seal if the car turns over? Vents 458400 and 458364 emphasize self-sealing when overturned. I'd rather use an integral cap and vent because my project is 85% street use focused. On the off chance I roll, what should I expect?

KevinP
Wichita, KS, USA
July 14, 2013

Does the cap vent seal if the car turns over? Vents 458400 and 458364 emphasize self-sealing when overturned. I'd rather use an integral cap and vent because my project is 85% street use focused. On the off chance I roll, what should I expect?

Answers

July 15, 2013
Jason
The cobra style gas cap has a spring loaded rubber vent seal and depending on the pressure in tank may or may not seal in a roll over application. This does not have a roll over check valve.
1 answers

will the cobra style gas cap work with a fuel injected system ? Thanks Bobby

trod27
March 14, 2013

will the cobra style gas cap work with a fuel injected system ? Thanks Bobby

Answers

March 14, 2013
Jason
The cobra style caps, both large and small, are vented and should work with fuelinjection or carburated systems
1 answers

Could you please tell me the measuements for the mounting plate for both the small and large Cobra gas cap? I would appreciate it. Thank You GOD BLESS AMERICA James

papas32
fort worth texas
August 18, 2011

Could you please tell me the measuements for the mounting plate for both the small and large Cobra gas cap? I would appreciate it. Thank You GOD BLESS AMERICA James

Answers

August 22, 2011
Jason
The small cap mounting plate measures 3-1/2" by 2-1/2". The large cap has a circle base that is 5-1/8" in diameter
Page 1 of 1

You may also be interested in:

Chrome Plated Stainless Steel Flush Mount Fuel Fill
(Part #6179040)
                        

This chrome plated stainless steel fuel fill can be flush mounted and includes a special opening key. Simple three hole mounting makes installation a snap.

Use with 1-1/2" I.D. hose (sold separately).

Weld-On Aluminum Fill Cap and Neck
(Part #91076409)
                        

Knurled aluminum cap and threaded aluminum neck. Requires welding. O-ring seal inside cap for positive seal on non-vented applications.

  • Has a 2.482 O.D. step at bottom
  • 1.25" overall height
  • ID of the neck is 2-1/8"
Billet Pop-Up Gas Cap
(Part #91012521)
                        

Polished billet aluminum pop-up flush mount gas cap is 2-1/2" O.D., 1.600" tall, and works with a 1-1/2" hose.

The Pop-Up gas cap, 910-12521, does not have a vent hole.  Some air might get past the threads that hold the cap on, but there
is no dedicated venting passage.

910-12521 Dimensions (PDF)

Speedway Large Cobra Style Gas Cap
(Part #6179022)
                        

This Speedway Cobra-style fuel filler cap includes a mounting gasket and stainless steel mounting hardware. 

  • Fully polished aluminum construction
  • Large Cobra Gas Cap is vented
  • Flip top style cap with roller latch
  • Cap measures 4-5/8" diameter
  • Mounting base measures 5-1/8" diameter
  • Hose fitting measures 2" diameter
45 Degree Fuel Filler Neck
(Part #91009080)
                        
Gas Filler neck is made of heavy aluminum and works with 1-1/2 inch and 2 inch hoses. Includes all hardware, seals, and adaptor.
  • Heavy aluminum construction
  • Hardware and seal included
  • Works with 1-1/2" and 2" hose with included adaptor
Gates 2 Inch Inner Diameter Fuel Filler Hose, 1 Foot Section
(Part #395201)
                        These quality Gates hoses feature double spiral wire reinforcement with a 2" inside diameter.  They are designed for use as a fuel filler hose.  Combine with our fuel filler necks for the perfect assembly.
  • Double spiral wire reinforcement
  • Gates® brand hose
  • Specially designed for fuel filler application
  • Sold in 1' cut length