McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Speedway Problem Solver Throttle Pedal

SAME DAY SHIPPING! Order within the next 10 hours 54 minutes and receive same day shipping

Specs
Material Type:
Steel
Overall Length:
10.50
Color:
Silver
Sold in Quantity:
Each
Finish:
Chrome
Cable length:
23.00
Pedal Length:
9.00
MFG. Part #:
913-55005
Garage Sale:
No
Pedal Width:
3.25
Notes
Mounting surface is 2" x 2".
Speedway Problem Solver Throttle Pedal
Speedway Problem Solver Throttle Pedal
Speedway Problem Solver Throttle Pedal
Speedway Problem Solver Throttle Pedal
Speedway Problem Solver Throttle Pedal

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This chrome plated steel spoon pedal assembly comes complete with a standard 23" cable, which makes for a quick, easy and reliable throttle linkage set-up. Gas pedal bracket bolts directly to the firewall. Throttle cable can be shortened or replaced with a longer cable (sold separately) if needed.

Notes

  • Upper arm is approximately 3" long
  • The cable enters the upper arm approximately 1/4" down

Customer Reviews

Rated 2.5 out of 5 by 37 reviewers.
RATING BREAKDOWN
37 reviews
5 Stars
8
4 Stars
6
3 Stars
1
2 Stars
5
1 Star
17
RECOMMEND THIS PRODUCT:

Tony26
Verified Purchaser
Palmdale, CA, USA
Product Rating

this is a great throttle cable

October 25, 2014
this throttle cable was easy to adapt to my application, a 1955 Ford country sedan with a 302 and aod. Thanks for selling me this devise.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Wayne22
Verified Purchaser
Chicopee, MA, USA
Product Rating

Needs a little Tweeking...

July 16, 2014
Only complaint is that there is no way to adjust the free play out, or change pedal position.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

rjbyram
mi
Product Rating

good idea, bad design and construction

March 23, 2014
chrome pedal is the only part I could save, rest is junk. sloppy, binds, too many failure modes. sure to cause stuck throttle sooner or later.
Pros:
  • None
Cons:
  • not safe
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Herbie64
Moorhead, MN, USA
Product Rating

poor design and construction

February 12, 2014
I didn't like the feel of this pedal from the get-go, but installed it any way. The unit has too many links with slack that I couldn't get adjusted out. Can't change the angle of the pedal arm, had to use shims. Pedal had a real loose feeling and didn't seem to return the pedal all the way, caused by the linkage slack. I uninstalled it and used another product from Speedway. More money down the drain. Project is '49 Ford 2dr with 302/C4.
Cons:
  • poor design and materials
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Mike1965
Verified Purchaser
Austin, TX, USA
Product Rating

Great product!

October 04, 2013
This little all in one unit does the trick for easy installation and cost. It worked great in my 30 Ford Tudor Rat and also in my 56 GMC pickup. The best bang for your buck!!
Pros:
  • installaton
  • Cost
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Oldblueoval
Harvel, IL 62538, USA
Product Rating

Worked where others would not!

September 07, 2013
I had some difficult space limitations on my 48 IH street rod P/U project. The problem solver pedal was just that, it fit easily in my tight space and operated perfectly. easy to mount and seams sturdy. Thanks again Speedway!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ugly
Hodgkins, IL, USA
Product Rating

This product is junk

September 06, 2013
After buying two of these pedals. They both broke after a couple hours. The cam inside the pedal slips. I would have just got a different style but I had already drilled the holes in my fire wall so I had to cut most of the brackets and garbage that is not needed and weld it back together.
Pros:
  • there is no pro for this product
Cons:
  • its poor quality
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

RRNick
Wi
Product Rating

NOT worth the time.

April 09, 2013
Gas pedal is poorly made. Just feels cheap. Breaks and always falling apart. Dont even waste your time buy one that is worth it.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

cindy
Arizona, USA
Product Rating

JUNK

January 28, 2013
Junk, What else can I say? Very poorly made and I have to buy another one but not from speedway.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

akitagandy
MS
Product Rating

too lite

November 29, 2012
the metal is too lite and it bends , sticks out to far from the firewall
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 4

Product Q&A

3 questions : 8 answers

Have the pedal assembly. Do not have the carb linkage attachment. Can I order just that one piece that fastens to the end of the throttle wire and connects to the carburetor throttle arm?

1 answers
MYLG
March 18, 2015

Have the pedal assembly. Do not have the carb linkage attachment. Can I order just that one piece that fastens to the end of the throttle wire and connects to the carburetor throttle arm?

Answers

March 19, 2015
EricM
We apologize but do not list the cable stop separately but your local hardware store or auto parts store should be able to help.

could i shorten the cable if i needed i think i need 18 inches

5 answers
carson city nevada
March 11, 2012

could i shorten the cable if i needed i think i need 18 inches

Answers

February 10, 2015
metro
Yes use a cut off wheel . Put a light coating of solder on the inner cable before cutting so it won't unravel. Make sure you remove the inner cable before cutting the outside housing. Good luck.
October 26, 2014
Tony26
yes, very easy to do.
October 05, 2013
Mike1965
Yes, you can cut it to length very easily.
December 22, 2012
mypayperview
Yep, you can make the cable as short as you may need!!! Just use a cuttoff wheel and be careful not to fray the inner cable..
March 14, 2012
John
The cable can be shortened as needed for the installers requirements.

what are the dimensions of the holes that mount to the firewall?

2 answers
September 30, 2011

what are the dimensions of the holes that mount to the firewall?

Answers

October 05, 2011
Barry VonDoom
1/4" diameter
October 04, 2011
QC
Mounting plate surface is 2x2 There are 3 mounting holes, two one top and one lower. Upper Holes: Hole center from plate edges are .25" horizontal and .5625" vertical Lower Hole: Hole center from plate edges is 1.125" and .625" vertical
Page 1 of 1

You may also be interested in:

Lokar FMG-6098 Eliminator Floor Mount Throttle Pedal, Billet Alum
(Part #4916098)
                        

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Pedal pad is 2” by 6-3/4”
  • Pad is parallelogram in shape and NOT rectangle
  • Brushed billet aluminum finish

Eliminator Throttle Pedal Installation Instructions (PDF)

 

Offenhauser 6230 Universal Cable Linkage
(Part #5606230)
                        This Offy universal cable linkage is for all single, 2 or 4 bbl. carburetors. Adjustable cable mounting assembly with mounting brackets, 48" cable. 
                    
Speedway Aluminum Spoon Pedal
(Part #91655010)
                        

Fully adjustable gas pedal and arm angle for custom applications. Polished aluminum construction.

  • Throttle Pedal Arm:  7-3/8"
  • Cable Arm:  5.3"
  • Mount Hole Centers:  1-5/8"

916-55010 Instructions (PDF)

Billet Aluminum Throttle Pedal
(Part #91655013)
                        
  • Polished aluminum construction with a urethane bushing at the center
  • Pedal is spring loaded
  • Serrated shaft allows you to position arm as needed
  • Easily adjust the angle between the two arms a full 360°
  • Pad measures 4.5" x 1.75"
Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
(Part #49106098)
                        

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Black finish

Eliminator Throttle Pedal Installation Instructions (PDF)

Lokar FMG-6097 Eliminator Floor Mount Throttle Pedal, Billet Alum
(Part #4916097)
                        

Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

  • Recipient of NSRA best new product
  • Eliminates routing cables through firewall
  • Billet aluminum splined adjustable shaft
  • Stainless steel "under-the-floor" cable mounting bracket
  • Mounts in multiple positions
  • Built-in pedal travel stops

Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

Lokar S-1034 Carb End Assembly for Lokar Throttle Cables
(Part #491S1034)
                        Lokar S-1034 Replacement Carb end assembly for Lokar Throttle Cables. 
                    
Speedway Universal Throttle Cable, 48 Inch
(Part #7204127)
                        Universal replacement throttle cables for your throttle pedal assembly. Heavy duty cable includes required hardware.
                    
Speedway Universal Throttle Cable, 60 Inch
(Part #7204128)
                        Universal replacement throttle cables for your throttle pedal assembly. Heavy duty cable includes required hardware.
                    
Speedway Universal Throttle Cable, 72 Inch
(Part #7204129)
                        Universal replacement throttle cables for your throttle pedal assembly. Heavy duty cable includes required hardware.