Speedway Lightened Aluminum Hot Rod Bomber Seat
Click image to enlarge
Q & A
What's in the Box
Everybody loves our Bomber seats, but some wanted them with lightening holes. Just like the original, this one is hand made from .090" aluminum with a hand-formed bead. Measures 16" wide and 21" tall. Needs no upholstery. Weighs only 5.76 lbs!
Mounting brackets sold separately.
- 20° Layback
- 16" Wide
- 21" Tall
- 15.25" Deep (measured front-to-back)
- Measures 4-1/8" from the top of the side rail to the bottom of the seat
See more on these aluminum bomber seats featured in Street Rodder Magazine's project tech article; 1929 Ford Roadster Pickup - The Land Speeder.
You may also be interested in:
Speedway Aluminum Hot Rod Bomber SeatMore Info
Kirkey 41500V Vintage Class 16 Inch Bucket SeatMore Info
Adjustable Seat RiserMore Info
Bomber Seat PadsMore Info
Speedway Bomber Seat Back CoversMore Info
Tru-Lite Titanium Seat Bolt, 3/8-24 Thread x 1 InchMore Info
Steel Fine Thread Nylock Nuts, 3/8 Inch-24 Thread, 50 PackMore Info
Universal Bomber Seat Mounting BracketsMore Info
Hand formed from .090" aluminum, this aircraft bomber style seat has a 20 degree lay-back design for increased comfort. Seat measures 16" wide and 21" tall. Measures 4-1/8" from the top of the side rail to the bottom of the seat.
Note: Seat mounting brackets are sold separately. They allow for approximately 6" of adjustment. No mounting holes have been drilled due to the unlimited number of possible combinations.
Kirkey's vintage class bucket seat was designed especially for vintage class racing, but will also work in many street rod applications. Its low back construction and optional upholstery design gives it the vintage look but is still constructed with today's technology.
- TIG welded .100" thick 5052 grade aluminum
- MIG welded inside for added strength
- Offset aluminum extrusion around perimeter of seat for added strength and safety
- Optional upholstery with contoured, high-density foam bottom provides complete leg and inner thigh support
910-70058 Dimensions (GIF)
910-70058 Instructions (PDF)
- Cadmium plated steel
- Sold in a set of 2 pairs
- Three mounting hole options to adjust height
- Hard back contoured foam seat pads are designed to fit securely in the base of Speedway Motors bomber seats
- Perfect accompaniment the Tribute T Interior kit
- Front Width: 14.00"
- Rear Width: 15.75"
- Length: 12.25"
- Front Height: 2"
- Rear Height: 3.5"
- Sold in pairs
Note: Customers using these pads in polished bomber seats should remove the pads from the seating area when exposed to direct sunlight.
Finish off your bomber seats with these quality black tweed cloth seat covers. They secure to the rear of the seat base with easy to install snaps and works with our bomber seat pads.
Tru-Lite titanium .875" O.D. button allen head bolt for mounting racing seats to your chassis. Made from 6AL/4V material which has 3 times the strength of aluminum and is 42% lighter than steel.
This Thin Nylock Nut Kit contains 50 pieces. These nylocks are 3/8 Inch-24 thread with a self locking nylon insert in the thread. They are designed to increase locking force and prevent the nut from coming loose.
These universal aluminum bomber seat mounting brackets allow approximately 6" of adjustment. No mounting holes drilled due to unlimited combinations. Fabrication required.
Sold as a PAIR for mounting one seat.