Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color

SAME DAY SHIPPING! Order within the next 12 hours and receive same day shipping

Specs
Sold in Quantity:
Each
Color:
White
Material Type:
Fiberglass
Garage Sale:
No
Overall Width:
1.00
Overall Length:
50.00
Material Thickness:
.07
Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, White Color

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Customer Reviews

Rated 4 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Pops
Verified Purchaser
Shreveport, La.

I will buy this product again !

August 31, 2010
I used the wrap on really blued pipes on my chopper. Helps with the heat and looks cool.
Pros:
  • Works Great
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 4 answers

1 answers

What is this header wrap made from? And what precautions should be made when wrapping it?

Schac
Lansing, MI
April 01, 2011

What is this header wrap made from? And what precautions should be made when wrapping it?

Answers

April 06, 2011
Ken
The Wrap is made of a specially treated, woven glass fiber material (very similar to fiberglass cloth). For the installation I suggest using the 1” wide material for the tight bends area of your header. The 1” material conforms more easily to the curves. I recommend overlapping each wrap by ½. This creates a 2-layer effect that maximizes the efficiency of the wrap and serves to keep the wrap in place the best. I suggest that you use stainless steel band clamps to secure the wrap at the beginning and the end (use stainless steel to resist the affects of heat and moisture). If you were to use a wire-feed welder to create a few, sharp, “nibs” in strategic places along the tube (mostly at places throughout sharp bends) they will serve to grip the wrap and prevent the wrap from loosening over time. If you just take your time and keep the wrap snug as you wrap, secure the ends with clamps, and “seal” the wrap with the aerosol coating when you’re done, you should have a long-lasting and very satisfactory installation.
2 answers

how do you secure the wrap from falling off?

joe
greenbay, wi
April 24, 2011

how do you secure the wrap from falling off?

Answers

May 25, 2011
Scot "Scooter" Douglas
I use stainless steel bandclamps (sold here) to secure the wrap.
April 26, 2011
Ken
I recommend overlapping each wrap by ½. This creates a 2-layer effect that maximizes the efficiency of the wrap and serves to keep the wrap in place the best. I suggest that you use stainless steel band clamps to secure the wrap at the beginning and the end (use stainless steel to resist the affects of heat and moisture).
1 answers

how much to do block huggers . sbc my wires keep melting will this stop that

joe a
milford , connecticut
January 06, 2011

how much to do block huggers . sbc my wires keep melting will this stop that

Answers

January 10, 2011
Pat
It will take 2 rolls to do a set of headers. You will have a little left over. This will help with the heat but the best thing would be to get the wires off the headers. You could use wire separators or even some boot protectors will help (part number: 6982524).
Page 1 of 1

You may also be interested in:

Thermo Tec 13101 Snap Strap
(Part #70413101)
                        

Snap strap stainless steel tie wraps. Enough to install wrap on two headers.  V-8 kit contains eight 9" straps and four 18" straps.

Item Details

Enough to do two headers
Thermo Tec 11001 Header Wrap, 1 Inch x 50 Ft, Natural
(Part #70411001)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Please consider the Snap Strap Kit For V-8 and the Hi-Heat Coating when using this product.

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings
Thermo Tec 11021 Header Wrap, 1 Inch x 50 Ft, Black Color
(Part #70411021)
                        

Thermo-Tec® header wrap keeps heat in the exhaust stream.  This increases exhaust velocity and engine efficiency, as well as reducing  under-hood temperature up to 70%.  Available in three different roll sizes.

Installation Instructions (PDF)

Typical Small Block Chevy Headers Need:

  • (2)  704-11002/11022 Wraps
  • (1)  704-13101 Strap Kit
  • (2)  70412001 High Heat Coatings

Typical Big Block Chevy and 180 Degree Headers Need:

  • (2-3)  704-11002/11022 Wraps
  • (1)     704-13101 Strap Kit
  • (2-3)  704-12001 High Heat Coatings

 

DEi 010126 Titanium Exhaust Wrap, 1 Inch x 50 Ft Roll
(Part #9101126)
                        

This exhaust wrap by Design Engineering, Inc. is made from pulverized lava rock and can stand 1800 degrees directly or 2500 degrees indirectly. Perfect for those extreme conditions and you don't need to use any spray-on coatings with it. Resists abrasion for longer life.

  • Constructed from pulverized lava rock - titanium-like strength and toughness
  • Reduces underhood temps resulting in cooler air intake for improved performance 
  • Able to handle 25% more heat than conventional wrap
  • Capable of handling more heat than any other wrap found in the market today
  • It’s pliable - no need to wet the wrap when wrapping tubing
  • Will not shrink
  • More resistant to temperature/vibration break-down, abrasions, chemical and hot oil spills
  • Very cool carbon fiber look

Works best on Stainless Steel headers.

Instruction Sheet (PDF)

Frequently Asked Questions (PDF)

Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, White Color
(Part #91013801)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, White Color
(Part #91013802)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, White Color
(Part #91013803)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Black Color
(Part #91013804)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Black Color
(Part #91013805)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Black Color
(Part #91013806)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Black Color
(Part #91013807)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Heatshield Armor Exhaust Wrap, 1/4 Inch Thick, 12 x 60 Inch Sheet
(Part #91071005)
                        Stop heat at its source with Heatshield Armor exhaust wrap. It has an aluminum shell and inner ceramic liner that allows it to withstand continuous 1800 degree Farenheit temperatures. Best of all, it's flexible, easy to cut and simple to install using six 14" long stainless steel ties to wrap it around your pipes. Each kit contains a 1' x 5' section of material.
                    
Speedway Header and Exhaust Wrap, 1 Inch x 50 Ft, Titanium Color
(Part #91013790)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 1 Inch x 100 Ft, Titanium Color
(Part #91013791)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 50 Ft, Titanium Color
(Part #91013792)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

Speedway Header and Exhaust Wrap, 2 Inch x 100 Ft, Titanium Color
(Part #91013793)
                        

If your exhaust runs too close to your brake lines, master cylinder, steering box or even the body, you will cook that item. This easy to use wrap will protect your investment. 

  • Retains exhaust heat within the tube for increased flow and horsepower
  • Reduced underhood temperatures
  • Protects surronding components from excessive heat
  • Made from a durable, specially treated woven glass fiber material

For a Small Block V8 engine, you will need approximately (2) 2" x 50' rolls. Big Blocks and 180° style headers may require one additional 2" x 50' roll.

DEi 010201 8 Inch Stainless Steel Locking Ties, 8 Pack
(Part #9101201)
                        

These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily. 

DEi 010202 14 Inch Stainless Steel Locking Ties, 4 Pack
(Part #9101202)
                        

These locking ties are designed to secure DEi's exhaust wrap but the uses are endless. Made of high grade stainless steel they will withstand temperatures in excess of 2500 degrees and have a tensile strength over 100 lbs. These locking ties will provide a finished look to any job quickly and easily.