Speedway Grand National Rear Hub, 5 on 4-3/4 Inch
Click image to enlarge
Q & A
What's in the Box
Item Details5 on 4-3/4" bolt pattern
You may also be interested in:
Winters Grand National Replacement Hub Assembly, 5 on 4-3/4 InchMore Info
Winters 2-1/2 Inch Grand National Angler Contact BearingMore Info
Low Drag Angular Contact Grand National Bearing - Ceramic Ball BearingMore Info
AFCO 10355 Grand National Rear Hub BearingsMore Info
DRP Performance 10518 Grand National Rear Hub Bearing SpacerMore Info
Replacement hub assembly with 5 on 4-3/4" bolt pattern..
Replaces the 2-1/2" GN bearing standard hubs used on many modifieds. Less friction equals more speed. No machine work required. Work great for those in limited horsepower classes who want to capitalize on every advantage they can get!
For a 9" Ford Grand National Hub off road/circle track application.
Kit Fits all GN 5 x 5 hubs except Super Speedway and Howe. Comes with RH 10206 locknut
These hub bearing spacers allow for consistent and precise bearing load every time the spindle nut is tightened, regardless of the torque applied. Without a bearing spacer, bearings are typically over tightened to prevent loosening during the race. With a bearing spacer installed, you can completely tighten the spindle nut and the hub will spin free every time. Bearing spacers save time, reduce bearing temperature and greatly increase wheel free spin, putting more horsepower to the wheels. You can feel the difference by simply pushing the car!
Testing has shown that the bearing spacer will make more difference than any “Low Drag” bearing set up currently available. When the spacer is used in conjunction with “Low Drag” Tapered bearings and seals, you will have the ultimate Low Drag set-up. These adjustable bearings feature a threaded sleeve and set screw to ensure you'll never have to worry about an over-tightened hub again!
- 2.5” Short Track 5×5 Rear
- 200%-300% more free spin vs. no spacer
- Designed to fit all Grand National spindle and hub combinations
- Makes servicing hubs simple & quick
- Bearings run cooler
- Saves time
- Eliminates bearing “Spin” on spindle
- Distributes side load evenly across bearings
- Works on tapered and angular contact bearings
- Once Set, typically never has to be adjusted unless bearings or hub is replaced
- Instructions Included
- Precision Machined in the USA
- +/- .001” Minimum Parallelism
- Sold each