Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Speedway Fully Machined Double D Shaft, Raw 22 Inch

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

We now offer ¾” DD shaft machined the entire length of the shaft, making it easier to set up your steering. Carbon steel shaft comes in 22".

You may also be interested in:

Firewall Mount Steering Shaft Bearing, 3/4 Inch Shaft Size
                        

These bearings have a .757" ID to slip over your 3/4" steering shaft and are in a lightweight aluminum bracket to allow easy installation of your firewall.

From center of bearing to center of mounting hole is 1.456" or approximately 1-1/2". This produces about a 3" mounting circle for the 3 mounting holes. 

Steel Double D Shaft, 3/4 Inch O.D., 18 - 36 Inch Lengths
                        

This 3/4" O.D. DD shaft has a 1.00" long "D" design on each end. Made from 1018 steel, weld-on. Excellent for steering shafts or other uses. Order desired length. 

NOTE: This DD shaft is only milled with flats on both ends for 1" of length of the shaft. It is not milled the entire length of the shaft and therefore, can not be cut to length unless it is going to be welded to a 3/4" round or has new flats milled into the end. Please see Flaming River DD shaft if fully machined DD shaft is required.

3/4 O.D. Solid Steel Steering Shaft
                        These solid steering shafts are made for you to cut to fit. 3/4" O.D. 1018 solid steel shaft. Available in 24", 36", 48", 60" and 72" lengths. 

Steer Shaft Application Chart

Polished Stainless Steel 3/4 O.D. Double D Shaft
                        It's pretty silly to use plain old steel double d shaft with those shiny stainless steel u-joints. We offer this polished stainless steel double D shaft in 18", 22" and 36" cut to fit lengths. 
                    
Speedway Fully Machined Double D Shaft, Raw 36 Inch
                        We now offer ¾” DD shaft machined the entire length of the shaft, making  it easier to set up your steering.  Carbon steel shaft comes in   36”.
                    
Speedway Fully Machined Double D Shaft, Raw, 18 Inch
                        We now offer ¾” DD steering shaft machined the entire length of the shaft, making  it easier to set up your steering. This carbon steel double D shaft comes in 18" lengths.