Speedway Ford-Mopar Universal Radiator

							                        

                                                        
Red Line Water Wetter is a unique wetting agent which reduces coolant temperatures by as much as 20° F. This is a liquid product which is designed to be added to solutions of antifreeze and water to help improve the heat transfer properties of glycol-based antifreeze. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Improves the ability of coolant to wet heat transfer surfaces by 50%.
Reduces or eliminates bubbles that form on hot metal surfaces to reduce coolant temperatures by up to 20°
Superior heat transfer properties compared to glycol-based antifreeze
Compatible with new or used antifreeze (including DEX-COOL and long-life versions) to improve the heat transfer of ethylene and propylene glycol systems
Improves heat transfer and reduces cylinder head temperature
Designed for use with all modern aluminum, cast iron, copper, brass and bronze cooling systems
Cleans and lubricates water pump seals
Reduces cavitation and complexes with hard water to reduce scaling
Does not lower cooling system below the thermostatically-controlled temperature
12 fl. oz. bottle treats 12-20 quarts
Water Wetter Tech Info (PDF)
Learn more about how cooling systems work with proper coolant mixture and additives by reading our tech article. Cooling System Principles.    
                                                    

						                        

							                        

                                                        
The 8000 Series is available for larger engine cooling needs. Perfect for late models running V-8 engine with 300 H.P. and above. This radiator has a 2 row core and is a Chevy engine configuration. Standard with 1- 1/2" inlet and 1-3/4" outlet and top and bottom mounts.

The width measurement (26") is measured from outside of tank to outside of tank, the entire radiator, not just the core.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.    
 

 
 
                                                    

						                        

							                        

                                                        
High quality, tough aluminum radiators. All models are pressure tested. Available with proper Ford position/style outlets. Two-core with 1" tubes; more efficient than 4 core with 12" tubes.
19" tall, 2 1/4" thick core
All aluminum construction - no epoxy
100% TIG welded
Multi-louvered fins
6061-T6 billet aluminum fittings
Available widths are 22", 26", 28" or 31". (Width measurement includes tanks.)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.    
                                                    

						                        

							                        

                                                        
Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.
These Chevy-style radiators have driver’s side upper inlets, passenger side lower outlets, and can be ordered in a variety of custom widths.
All-aluminum, furnace-brazed construction
No cheap epoxy glue or crimped in gaskets
Maximum amount of fins per inch allows greater heat transfer
Billet filler necks
Available in 22", 24", 28", or 31" widths (measurements include tanks)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance. 
                                                    

						                        

							                        

                                                        This set of radiator pads consists of two pieces of 1/4" thick rubber. One set provides enough rubber for all four brackets in our radiator mount bracket kit 91734700-STL.
                                                    
						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters. Measures 21-3/4" wide x 19-1/2" tall x 2-5/8" thick (approximate)
Works well with Speedway 28" wide radiators 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Shroud made of 14 gauge aluminum
Fan Ring, 3” x 65”
Flat tab, 3” x 7”
Brackets, 90º (6)
Screws (6)
Fan Shroud Installation Instructions (PDF)
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
This universal radiator shroud is made from tough high-impact plastic to withstand today's rigorous racing. Mounting brackets will need to be fabricated for each application.
23-3/8" W x 20-7/8" L x 2-7/8" T
Accommodates up to a 19" diameter fan
Keeps motor cool during a long night of racing
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many applications with a belt-driven fan. The adjustable  collar will accommodate 15"-20" fan diameters.
Perfect fit for Speedway & Afco 31" wide radiators.
Instruction sheet
Shroud made of 14 gauge aluminum
Fan Ring, 3” x 65”
Flat tab, 3” x 7”
Brackets, 90º (6)
Screws (6)
Measures 19" tall x 26" wide x 2-5/8"deep
Catalog Correction: The part number for this shroud is 917-4023, NOT 917-4032 as listed in our latest catalog.
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance. 
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many  applications with a belt-driven fan. The adjustable  collar will  accommodate 15"-20" fan diameters.
Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud. 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Measures 19" tall x 16-3/4" wide x 2-5/8" deep
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many   applications with a belt-driven fan. The adjustable  collar will   accommodate 15"-20" fan diameters.
Works well with Speedway 26" wide radiators 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Measures 19" tall x 20-1/2" wide x 2-5/8" deep
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.