Speedway Chevy Universal Aluminum Radiators

							                        

                                                        
High quality, tough aluminum radiators from Ron Davis. All models are pressure tested. GM position/style outlets. Two-core with 1" tubes; more efficient than 4 core with 1/2" tubes. 

19" tall, 2-1/4" thick.  Available widths are 22", 26", 28" or 31". (Width measurement does include tank.)
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.   
                                                    

						                        

							                        

                                                        
Manufactured of lightweight aluminum, Griffin radiators are the choice of the motorsports professional. For the reliable cooling you need on the track, these radiators feature two rows of 1" tubes. The Griffin design incorporates open fin spacing that promotes air flow through the radiator to enhance cooling and help eliminate clogging. 
19" tall
Available in widths of 22", 24", 27-1/2" or 31"
Width measurements include tanks
Chevy style outlets
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance. 
                                                    

						                        

							                        

                                                        This set of radiator pads consists of two pieces of 1/4" thick rubber. One set provides enough rubber for all four brackets in our radiator mount bracket kit 91734700-STL.
                                                    
						                        

							                        

                                                        Leave it to Speedway to offer you a professional quality aluminum racing radiator at an affordable price. Check out these features: 
All aluminum, furnace brazed construction - NO EPOXY, NO GASKETS 
2 rows of 1" aluminum tubes (out cools 5 rows of copper) 
Maximum amount of fins per inch, allows greater heat transfer 
Billet filler neck - not stamped 
Available in 22", 24", 26", 28" or 31" (width measurements include tanks) 
19" tall
In this Ford / Mopar Application the upper hose is located on the passenger side & the lower hose is located on the driver side. 
Speedy Bill recommends using a 32 lb. or less radiator cap and to check it regularly.
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance.  
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be built to fit many applications with a belt-driven fan. The adjustable collar will accommodate 15"-20" fan diameters. Measures 21-3/4" wide x 19-1/2" tall x 2-5/8" thick (approximate)
Works well with Speedway 28" wide radiators 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Shroud made of 14 gauge aluminum
Fan Ring, 3” x 65”
Flat tab, 3” x 7”
Brackets, 90º (6)
Screws (6)
Fan Shroud Installation Instructions (PDF)
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
Of all the components in the cooling system, the performance of the radiator is the most critical. Afco understands the vital role the radiator plays in protecting the investment you have in your car. That is why they make no excuses or compromises in constructing the best aftermarket radiators in the industry. Don't trust your pride and joy to anything less than Afco quality. 
Afco radiators allow your car to remain at constant temperature, which means that power delivery is more consistent. Using years of experience, advanced design, and thorough testing, Afco radiators are designed to promote optimal air flow and cooling by utilizing appropriate fin count, tube size, core thickness, and fin serration for each particular application.
100% Aluminum construction (no epoxy)
100% TIG welded
100% pressure-tested
Cast filler necks feature screw-in-bleed, won't crack or leak with age 
Learn more about how radiators work and selecting the proper radiator for your vehicle by reading our tech article. Radiator Cooling Performance. 
                                                    

						                        

							                        

                                                        
This universal radiator shroud is made from tough high-impact plastic to withstand today's rigorous racing. Mounting brackets will need to be fabricated for each application.
23-3/8" W x 20-7/8" L x 2-7/8" T
Accommodates up to a 19" diameter fan
Keeps motor cool during a long night of racing
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many applications with a belt-driven fan. The adjustable  collar will accommodate 15"-20" fan diameters.
Perfect fit for Speedway & Afco 31" wide radiators.
Instruction sheet
Shroud made of 14 gauge aluminum
Fan Ring, 3” x 65”
Flat tab, 3” x 7”
Brackets, 90º (6)
Screws (6)
Measures 19" tall x 26" wide x 2-5/8"deep
Catalog Correction: The part number for this shroud is 917-4023, NOT 917-4032 as listed in our latest catalog.
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance. 
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many  applications with a belt-driven fan. The adjustable  collar will  accommodate 15"-20" fan diameters.
Works well with Speedway & Afco 24" wide radiators and will work with the Speedway & Afco 22" wide radiators with slight trimming of the width of the shroud. 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Measures 19" tall x 16-3/4" wide x 2-5/8" deep
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.
                                                    

						                        

							                        

                                                        
These universal fit aluminum fan shroud kits can be  built to fit many   applications with a belt-driven fan. The adjustable  collar will   accommodate 15"-20" fan diameters.
Works well with Speedway 26" wide radiators 
Made for exact fit of many Muscle Car and Hotrod radiators
Allows the installer the choice of off center, side-to-side and above the radiator fan positioning
For crossflow or downflow radiator mounting
Includes fully-formed shroud of .063" lightweight aircraft aluminum
3" trimmable collar
Adjustable collar; adjusts for 15-20" fan diameters
Includes all the necessary hardware and mounting instructions
Measures 19" tall x 20-1/2" wide x 2-5/8" deep
Learn more about the importance of using a fan and shroud with our radiators by reading our tech article. Radiator Cooling Performance.