Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Speedway Cast Iron Scalloped Brake Rotor - 12.19 x .81 Inch

SAME DAY SHIPPING!

Specs
Material Type:
Cast Iron
Weight:
6.13
Sold in Quantity:
Each
Finish:
Natural
Rotor Diameter:
12.19
Rotor Thickness:
.81
Rotor Construction:
Vented
Rotor Hat Bolt Pattern:
8 x 7.00"
Garage Sale:
No
Rotor Location:
Rear
Rotor Shape:
Scalloped
Drilled:
No
Slotted:
No

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Speedway's premium 32 Vane scalloped cast iron brake rotors weigh only 6.13 lbs. 12.19" x .81", 8 on 7 thru.

Notes

Proper Break-In Procedure for Steel or Cast Iron Rotors

New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.

Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage.

Specs

  • Vented iron 
  • Inboard mounted (Sprints)
  • Thickness: 0.81"
  • O.D.: 12.19"
  • Bolt Circle: 8 x 7"
  • Threads:  Thru
  • Weight: 6.13 lbs
  • Face: scalloped

Item Details

0.81 X 12.19
8 x 7" B.C.

You may also be interested in:

Winters Performance K6396S1 Sprint Car Magnesium One Piece Brake Clamp
                        

Reduce rotating weight and maintain strength on your sprint car with this one-piece, floating-style magnesium brake hub.

  • Lightweight, strong magnesium construction
  • Can be installed on rear end in either direction
Wilwood 160-8136 Cast Iron Scalloped Brake Rotor, 12.19 x .81 Inch
                        

Racers are constantly searching for the ultimate balance between the lowest weight & the ability to effectively manage heat. Decreased rotating weight in the drive line provides quicker deceleration under braking and quicker acceleration out of the corners. Lower weight also benefits handling with improved spring and shock control over the unsprung suspension mass. Wilwood's ULS-32 scalloped iron rotors provides effective lightweight options for sprints, late models, modifieds & other competition applications that race in low to medium temperature ranges.

  • Scallop configuration provides greatest weight reduction on a vented straight vane iron rotor
  • Scallop machining removes as much as three pounds, or nearly 33% of the rotor mass
  • Vented castings provide increased cooling capacity over machined steel plate rotors
  • Improved structural durability over drilled rotor designs
  • Vented iron
  • Inboard mounted
  • Threads:  Thru

Note: Suitable for Light Dirt Racing applications. Scalloped Brake Rotors are unsafe for street use.

Rotor Application Chart (GIF)

Wilwood 170-0208 Aluminum Brake Hat, 1.96 Inch Offset
                        

Willwood brake hats have a long standing reputation for fit, performance, and durability. Manufactured from premium grade aluminum alloys offering high strength and low weight.

Wilwood Brake Hat Chart (Link)

Wilwood 160-5538 Inboard Steel Drilled Scalloped Rotor, 12.19x.35 Inch
                        

Wilwood's Drilled Steel brake rotors provide a durable lightweight option in applications where sustained temperatures remain in the low to moderate range, and high heat spikes are only observed on an intermittent basis. Steel rotors are typically found in lighter weight open wheel cars such as sprints and modifieds. A special alloy and proprietary manufacturing processes give these rotors high resistance to thermal distortion with excellent friction and wear characteristics against the pads.

Note: Must use bolt kit 835-2305567 to mount this rotor.

Speedway Cast Iron Drilled Scalloped Brake Rotor - 12.19 x .810
                        Speedway's premium 12.19" x .810" drilled & scalloped vented cast iron brake rotors weigh only 5.56 lbs.
                    
2 Piece Aluminum Inboard Clamp
                        

Clamps to Winters axle. Made for easy install of a inboard break system.

 

  • 7" 8- rotor bolt pattern.