Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Speedway Carburetor Bracket and Throttle Return Springs

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Stainless Steel
Overall Height:
2.06
Overall Width:
1.95
Overall Length:
2.77
Sold in Quantity:
Kit
Finish:
Polished
Notes
Includes 2 springs approx. 4.25" in length. There is no provision in this bracket for an automatic transmission kickdown cable.
Speedway Carburetor Bracket and Throttle Return Springs

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Stainless throttle cable bracket & spring set. Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quad carburetors. Dual spring design provides a safe, reliable throttle return when compared to single spring set-ups.

Note: There is no provision in this bracket for an automatic transmission.

Customer Reviews

Rated 5 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
7
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

jeffinwashington
Verified Purchaser

Looks great

April 08, 2015
Works great. East to install. good quality stuff here.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Miki
Verified Purchaser
Texas, USA

It worked as expected

August 21, 2014
It worked as expected. It worked as expected. It worked as expected.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Redfish

Beautiful Part, great price

September 22, 2013
I was looking for return springs, and needed them quick. Speedway offered the better looking part, at the best price...stainless too!
Pros:
  • Great looks
  • Stainless Steel
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

griz
Verified Purchaser
st. louis mo.

I received exactly what what was picture

June 27, 2011
I used them as return springs for duel 4 barrels
Pros:
  • Exactly as ordered
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Kellysi
Verified Purchaser
Naples

High Quality

March 17, 2011
High Quality
Pros:
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

beaver
Verified Purchaser
clarksville tn

easy install

March 11, 2011
easy install
Pros:
  • Easy To Install
  • Durable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

milt
allen, tx

help

March 01, 2010
good product for limited caurb usage, i need something of this design that would fit my chevy intake with 6 holly 94s
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

4 questions : 4 answers

1 answers

Carb return spring bracket I have a Weiand 2 x 4 tunnel ram what would you recommend for carb return brackets? Do you sell one for both carbs or two separate brackets. Thanks, Mark

Viper
December 14, 2013

Carb return spring bracket I have a Weiand 2 x 4 tunnel ram what would you recommend for carb return brackets? Do you sell one for both carbs or two separate brackets. Thanks, Mark

Answers

December 16, 2013
EricM
This return bracket and springs would work fine on your setup. You will need one for each carb. Sorry I do not have a one that would do both carbs all in one.
1 answers

does this fit on holley demon 750?

banksy
Moore, OK, USA
August 12, 2013

does this fit on holley demon 750?

Answers

August 13, 2013
Jason
The Speedway carburetor bracket with return springs is universal and mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quad carburetors. There is no provision in this bracket for an automatic transmission.
1 answers

Would this fit my 72 cutlass s with the stock manifold? I have a 1972 cutlass s with a edelbrock carb on a stock manifold and was wondering if this would fit on the stock manifold,

classycutlass
Omaha, NE, USA
June 26, 2013

Would this fit my 72 cutlass s with the stock manifold? I have a 1972 cutlass s with a edelbrock carb on a stock manifold and was wondering if this would fit on the stock manifold,

Answers

June 26, 2013
Jason
The Speedway carburetor bracket with return springs is universal and mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quad carburetors. There is no provision in this bracket for an automatic transmission.
1 answers

does this bracket have the square hole for a stock accelerator cable?

October 07, 2011

does this bracket have the square hole for a stock accelerator cable?

Answers

October 10, 2011
John
This is strictly a carb throttle bracket and does NOT include the square hole for the OEM automatic transmission kick down cable. What may fit your needs is part number 6502428.
Page 1 of 1

You may also be interested in:

Lokar SRK-4000 Carburetor Bracket and Throttle Return Springs
(Part #491SRK4000)
                        

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and dual stainless springs are used to mount Lokar’s Throttle Cable and Kickdown kits. Design provides improved clearance on Edelbrock carbs. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

Mounts Lokar Throttle Cables and Kickdowns for a nice clean setup. Includes allen wrench to adjust the set screw.

Lokar Hi-Tech Stainless Throttle Cable Kit
(Part #4911000HT)
                        

Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

Lokar Universal Black Throttle Cable Kit
(Part #4911000U)
                        

Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

491-1000U Instructions (PDF)

Lokar XSRK-4000 Universal Throttle Cable Bracket and Spring Kit
(Part #49141000)
                        These Lokar stainless throttle cable brackets mount  to the rear of your Holley, Edelbrock, AFB, Quadrajet, or inline dual  carburetors. These brackets are used to mount Lokar's throttle cable and  kickdown assemblies.
  • Mounts to carburetor base
  • Accepts Transmission Kickdown Cable
  • Accepts Throttle Return Spring
  • Return Spring Included
  • Hardware Included
  • Stainless steel bracket
  • Black powdercoated
  • Sold individually
Lokar XSRK-4001 Black Stainless Steel Carburetor Bracket
(Part #49104001)
                        

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads.  Design provides improved clearance on Edelbrock carbs. Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.

  • Mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads
  • Stainless steel
  • Improved clearance on Edelbrock carbs
  • Includes tension screw to prevent bracket movement under extreme pressure

49104001 Installation Instructions (PDF) 

Lokar SRK-4001 Stainless Steel Throttle Cable Carburetor Bracket
(Part #491SRK4001)
                        

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and GM designed dual stainless springs are used to mount Lokar's Throttle Cable and Kickdown kits.

  • Design provides improved clearance on Edelbrock carbs.
  • Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.
Lokar SRK-4002 Stainless Steel Throttle Return Springs
(Part #491SRK4002)
                        

Stainless bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and In-Line Dual Quads. Stainless bracket and GM designed dual stainless springs are used to mount Lokar's Throttle Cable and Kickdown kits.

  • Design provides improved clearance on Edelbrock carbs.
  • Design includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable, such as with a 700-R4 transmission.
Lokar XSRK-4002 Midnight Series Steel Throttle Return Springs
(Part #491XSRK4002)
                        

Nostalgic hot rod style is exhibited with Lokar's Spoon Throttle Pedal. The pedal is designed with the same quality as demonstrated in other Lokar Throttle assemblies. The removable lower arm is splined for versatility in mounting to the right or left of the mounting bracket.

  • Steel round brake/clutch pads and dimmers are equipped with rubber inserts which completes the ensemble.
  • The Spoon Pedal and matching Brake/Clutch Pad and Dimmer
  • Available in chromed or black finish.