ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Speedway 2.3 Ford Super Stock Rods

Free Shipping Free Shipping
Speedway 2.3 Ford Super Stock Rods
Speedway 2.3 Ford Super Stock Rods
Speedway 2.3 Ford Super Stock Rods

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Reconditioned stock rods with 170,000 psi rod bolts. Resized, magnafluxed and clearanced. Sold in matched sets of four.

Item Details

Stock Bearing

Notes

Both the rod and rod cap have "FORD" script cast into them - which is required by some sanctioning bodies.

Customer Reviews

This product has no reviews.

Product Q&A

4 questions : 6 answers

2 answers

Could these rods be set up for floating pins?

Fathertime
London Ontario Canada
January 15, 2015

Could these rods be set up for floating pins?

Answers

April 02, 2015
CentralCoastCustoms
Yes, but you would have to pay a machine shop to resize little end to fit a floating pin. We hope we've helped with your question..
January 15, 2015
EricM
You could possibly have the pin hole bored out and insert a bronze bushing to use them as a floating pin. There is actually very little gain with a floating pin and cost versus gain doesn't really dollar out.
1 answers

are the rods bushed for floaters?

Stosh
October 31, 2013

are the rods bushed for floaters?

Answers

November 01, 2013
Jason
No, these 2.3 Ford rods are for press fit pins only. Speedway does offer a Crower rod that has the bushed pin, part #29091231.
1 answers

What size are the journals?

Jon
Lexington,KY
February 04, 2012

What size are the journals?

Answers

February 06, 2012
Jason
The big end bore is 2.1720 in. This is for a 2.00" journal
2 answers

does the rods and cranck shaft need to be balanced

backersfield CA
June 21, 2011

does the rods and cranck shaft need to be balanced

Answers

April 02, 2015
CentralCoastCustoms
If you want your motor to live more than 1 hour you would have to balance rods.
June 21, 2011
Jason
If using in a racing or higher RPM application balancing crank is always an advantage and highly reccomended. Rods are weight matched
Page 1 of 1

You may also be interested in:

Ford 351W H-Beam Rod
(Part #91015349)
                        High strength H-beam rod. 5.956 long with bronze bushings and ARP bolts.
                    
Crower SP93231B-4 2.3 Ford Sportsman I-Beam Rods, Stock Bearing
(Part #29091231)
                        These 5.2 inch rods are much stronger than stock 2.3 rods. Made of 4340 chromoly steel and include 180,000 psi rod bolts. Set of four.
                    
Crower SP93237B-4 2.3 Ford Sportsman I-Beam Rods, Chevy 6 Bearing
(Part #29091237)
                        These 5.7 inch rods are much stronger than stock 2.3 rods. Made of 4340 chromoly steel and include 180,000 psi rod bolts. Set of four.

Item Details

Crankshaft must be machined to accept Chevy 2.00" rod bearings.