Speedway 1955-57 Chevy Car V8 Motor Mount Kit
Click image to enlarge
Please NOTE the following about this product:
- This item is sold as a pair.
Q & A
What's in the Box
Side-mount motor mounts are a more rugged mount design than the original front mounts found on your Tri-Five Chevy, plus they allow more room for front drive accessories. Our motor mount kit allows you to side-mount 1958-up S/B Chevy 283-400 c.i. V-8 engines into your 1955, 1956, or 1957 Chevy passenger car. Will also work on 396-454 big block engines.
Includes frame brackets, engine brackets, rubber mount cushions, hardware, and instructions.
You may also be interested in:
Lokar BAG-6074 1955-57 Chevy Billet Throttle PedalPrice: $134.99More Info
Painless Wiring 20107 1955-1957 Chevy 21 Circuit Wiring HarnessPrice: $422.99More Info
Speedway 1955-57 Chevy Deluxe Front Disc Brake KitMore Info
American Autowire 500423 1955-1956 Chevy OEM Style Wiring HarnessMore Info
Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, PlainPrice: $668.99More Info
Unisteer 8010400-01 1955-57 Chevy Power Rack & PinionPrice: $799.99More Info
American Autowire 500434 1957 Chevy Style Wiring HarnessMore Info
Painless Wiring 20106 1955-57 Chevy 28 Circuit Wiring HarnessPrice: $500.99More Info
Ricks Tanks 1011 1955-57 Chevy Carbureted Steel Fuel Tank, 16 GallonMore Info
Wilwood 140-11010 FDL 11.75 In Pro Series Front Brake Kit, 55-57 Chevy$811.99More Info
1955-57 Chevy Car Disc/Drum Brake Booster Master Cylinder ComboMore Info
Flowmaster 17174 1955-1957 Chevy Dual Exhaust KitMore Info
1955-57 Chevy Transmission Crossmember KitsMore Info
This throttle pedal converts the sloppy original linkage to a modern cable system when used with Lokar throttle cables (sold separately). Pedal is spring loaded and mounts to the firewall, just like the original. The arms are splined for fine adjustment and can be switched for right and left adjustment of the throttle pad. Pad measures 2" x 5".
This 21 circuit kit is designed to fit the 1955-1957 "Tri-Five Chevy". This harness features a factory location Painless mounting plate for the fuse block, and special dash & turn signal connectors. Included with this harness you will also find pre wired plugs for the headlights and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.
Just what's needed to update your classic Tri-Five Chevy! Eliminate those archaic ball bearings and gain first class stopping power all at once with this front disc brake conversion kit. Rotors and caliper brackets bolt onto your original spindles with no modification or machining required. Calipers mount to the front of the spindle.
This disc brake kit will increase the total front track width by 1-3/4" (7/8” per side).
- Uses 11" rotors and 1969-72 GM calipers (7/16"-20 inlets)
- May not clear some 14" wheels
- Bolts onto stock '55-'57 spindles with no machine work
- Includes rubber brake hoses
910-31949 Instructions (PDF)
If you need a harness that has both OEM and modern features, this is the one for you. This Classic Update wiring harness from American Autowire allows you to plug into the original gauges and dash accessories, headlights, taillights and heater controls.
Included are connectors for most aftermarket gauges, steering columns, air conditioning, power windows, locks and seats and stereos. Headlight, ignition and dimmer switches included. For use with 1955-1956 Chevy passenger cars, wagons and Nomads only.
This harness makes use of the stock key and tumbler. If a new key and tumbler are needed, they are available from the manufacturer.
Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location.
Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
446-1455 Instructions (PDF)
Finally a bolt-on power rack and pinion for 1955-57 Chevy cars. Simply remove the original steering box, idler arm and tie rod assembly and bolt this unit back in using the original mounting holes. Includes tie rod ends, special steering arms, and a pair of banjo fittings to adapt to AN6 fluid lines. Can be used with most GM steering pumps.
- This item must be used with OEM style spindles. It WILL NOT work with dropped spindles.
- Designed for use with S/B Chevy 265-400 c.i. V-8.
- Must use chassis headers and a stock type pan sump for clearance.
- Steering U-joint 910-32255 is required (17mm).
910-32246 Instructions (PDF)
If you need a harness that has modern features, this is the one for you. This Classic Update wiring harness from American Autowire allows you to plug into the original gauges and dash accessories, headlights, taillights and heater controls.
Included are connectors for most aftermarket gauges, steering columns, air conditioning, power windows, locks and seats and stereos. Headlight, ignition and dimmer switches included. For use with 1957 Chevy passenger cars, wagons and Nomads only.American Autowire (PDF)
This 28 circuit kit is designed to fit the 1955-1957 "Tri-Five Chevy" and includes additional circuits for power options and accessories. This harness features a factory location Painless mounting plate for the fuse block, and special dash & turn signal connectors. Included with this harness you will also find pre wired plugs for the headlights and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation.
These 1955-57 Chevy car fuel tanks from Rick's Tanks are hand formed from 304 grade stainless steel and are a direct replacement for your original gas tank. Ricks Tanks feature a unique interal baffling system not found in O.E. tanks to control fuel tank slosh. The baffling runs from front to rear, side to side, and surrounds the fuel pickup to eliminate fuel starvation during acceleration and hard braking. All fittings and flanges are also CNC turned 304 stainless steel to ensure a proper seal.
Carb type tanks have a 3/8" NPT top feed outlet fitting and a 1/4" NPT vent fitting. Each tank comes with stainless mounting straps and hardware, and all tanks have a brushed finish for easy up-keep.
Note: this tank is intended to only work in conjunction with a reproduction smooth floor pan. It does not have the corresponding recess for the spare tire
that is needed for a stock floor pan with a well for the spare tire.
This heavy duty Wilwood brake kit is just the ticket for your '55, '56 or '57 Chevy car. Features 4-piston billet Dynalite calipers, aluminum hubs, 11-3/4" vented rotors and required brackets and hardware. Calipers have 1/8" NPT inlet. Works with 15" and larger wheels.
Note: For stock 1955-1957 Chevy spindles ONLY - will not fit 2" drop aftermarket spindles.
When you put modern front disc brakes on your '55-'57 Chevy car, you should update the master cylinder as well. The stock '55-'57 drum brake master cylinder does not have the capacity to supply the proper amount of pressure for front disc brakes. This simple bolt-on power brake assembly will ensure your brakes are operating at peak performance.
- Kit contains a 1" bore master cylinder with 1/2"-20 and 9/16"-18 outlets, 8" dual diaphragm booster, and a disc/drum combination valve (provides proportioning and metering).
- Also includes line to connect the prop/metering block to the master cylinder and the necessary hardware to mount the booster to your original '55-'57 Chevy brake pedal.
- Measures 14-1/4" from firewall bracket to end of master cylinder.
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
What could be better than a 2-1/2" American Thunder dual exhaust for your 1955-57 Chevy car? This header-back aluminized 16-gauge kit includes head pipes, welded H-pipe, two Super 40 mufflers, mandrel bent tail pipes, stainless steel tips and mounting hardware.
1955-1957 Chevrolet Exhaust System
- Any type V8
- 2.50" Mandrel Tubing
- 4 Piece Head-pipe for Headers or Factory Down Pipes
- Includes Welded H-Pipe & Hardware
- Utilizes Factory Brake Lines
- 1 pair Super 40 Mufflers
- Flowmaster Embossed Stainless Tips
- American Thunder
- Dual pipes out the Rear Bumper exit (DOR)
On your '55-'57 Chevy car, the front motor mounts are at the front of the block and the rear mount attaches to the bellhousing. This works fine for original use, but makes it hard to swap in a different tranny or add belt driven accessories to the front of the engine. This mount kit is the solution!
- Uses common mounts.
- No welding, but drilling is required.
916-28910 Instructions (pdf)