Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Spark Plug Boot Protectors, Set/8

Spark Plug Boot Protectors, Set/8

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a set.

Details

Reviews

Q & A

What's in the Box

Spark plug protector eliminates that melted boot problem! Heat treated fiberglass, universal size fits most boots - even 90°. Protects up to 1200°. Non-flammable, non-reactive to petroleum products and resists water and fungus. Overall length is 6.25".

Customer Reviews

Rated 5 out of 5 by 6 reviewers.
RATING BREAKDOWN
6 reviews
5 Stars
6
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

sbro
Verified Purchaser
Kentucky, USA
Product Rating

boot protectors

March 23, 2015
okay, these are not cheap but i don't like burnt boots and wires either. these eliminate any problems with heat around the headers. they are a little longer than others and 8 come in the package.
Pros:
  • longer than some
  • eliminate burn
  • all 8
Cons:
  • Expensive
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

troublemaker
Verified Purchaser
Rio Rancho NM
Product Rating

quality at a competitive price

July 29, 2012
quality and excellent price
Pros:
  • Improves Performance
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

wiley
Verified Purchaser
lakewood ny
Product Rating

great fit for 90 degree wires

April 14, 2012
great quick and easy installation.
Pros:
  • Easy To Install
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

BERTSCRUISER30
LOS LUNAS, NM
Product Rating

A DEFINATE LIFESAVER FOR YOUR WIRES

February 13, 2011
BURNED UP WIRES MY FIRST RACE SEASON ALOT, & HAD VAPOR LOCKING ISSUES FROM HEAT IN THE ENGINE COMPARTMENT. RUNNING A SBC IN A CRUISER DIVISION ON A DIRT OVAL, I BOUGHT 2 SETS OF THESE BOOT PROTECTORS. INSTALLED 1 SET ON MY IGNITION WIRES & PUTTING THE REMAINING ONES ON THE FUEL LINE GOING FROM THE FUEL PUMP TO THE 4 BARREL CARB I WAS RUNNING. THE RESULTS WERE NIGHT & DAY, I HAD NO MORE ISSUES AT ALL & CHANGED NOTHING ELSE ON MY MOTOR. MORE PROOF NEEDED? I WON THE CHAMPIONSHIP IN 2010 IN MY DIVISION & HAD NO DNF FINISHES. NO VAPOR LOCKING & NO MORE BURNT WIRES. THANK YOU SPEEDWAY
Pros:
  • AWESOME A CHEAP FIX
  • Easy To Install
  • Improves Performance
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ohio_jim
Verified Purchaser
Perrysburg Ohio
Product Rating

Good Product ,, I will order this again

October 08, 2010
I put this item on all 8 spark plugs and and the power steering hoses that run close to the header
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Freedo
North Chili NY
Product Rating

spark plug boot protector

March 31, 2010
I have block hugger headers and straight boots. These boot covers work perfect.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
6982524

Product Q&A

1 questions : 1 answers

1 answers

what is the over all length of this

Ben the backyard mechanic
Bay City,Mi.
August 01, 2011

what is the over all length of this

Answers

August 03, 2011
Jason
This is 6-3/16" long
Page 1 of 1

You may also be interested in:

Spark Plug Wire Dividers
(Part #6501648)
                        

Universal mounting tabs. New, block style wire retainers fit 8mm & smaller wire sizes and are secured with recessed allen bolt. (Allen wrench included). They work best with 8mm wires. 

 

Spark Plug Boot Protectors
(Part #6982523)
                        Spark plug protector eliminates that melted boot problem! Heat treated fiberglass, universal size fits most boots - even 90°. Protects up to 1200°. Non-flammable, non-reactive to petroleum products and resists water and fungus. Overall length is 6.25".
                    
MSD 8843 Spark Plug Wire Separators, Pro-Clamp
(Part #5478843)
                        

Separate your plug wires to keep them from arcing across one another with these MSD Pro-Clamp wire separators.

Set is supplied with two 4-wire, two 3-wire, and four 2-wire separators.

MSD Rebate (Link)

DEi 010409 Aluminized Heat Sheath Plug Wire Protector, 3/4 x 6, 4-Pack
(Part #35610409)
                        Aluminized Plug Wire Sheaths are  constructed from high-temperature rated glass fiber material bonded to a  heat reflective aluminized material. Plug Wire Sheaths are an  inexpensive alternative for protecting specific areas on both ignition  wire and boot locations from damaging heat generating sources. 
  • Capable of withstanding 2000°F radiant heat
  • Inexpensive alternative for protecting ignition wires and boots
  • Other uses include protecting electrical wiring, harnesses, hoses, cables & more
  • Easy to install
  • 3/4" diameter x 6" long
  • 4 to a pack
DEi 010501 Protect-A-Boot Spark Plug Boot Heat Shield, Silver, 2 Pack
(Part #35610501)
                        

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

  • Double-wall construction for added durability
  • Helps prevent burn-through, hardening and cracking of boots
  • Installs in seconds
  • Universal-fits most straight or angled boots
  • Withstands 1200°F direct continuous heat
  • Non-flammable & protects against chemicals & resists water

Protect-A-Boot Instructions (PDF)

Exhaust Wrap Frequently Asked Questions (PDF)  

 

DEi 010502 Protect-A-Boot Spark Plug Boot Heat Shield, Silver, 8 Pack
(Part #35610502)
                        

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

  • Double-wall construction for added durability
  • Helps prevent burn-through, hardening and cracking of boots
  • Installs in seconds
  • Universal-fits most straight or angled boots
  • Withstands 1200°F direct continuous heat
  • Non-flammable & protects against chemicals & resists water

Protect-A-Boot Instructions (PDF)

Exhaust Wrap Frequently Asked Questions (PDF)  

 

DEi 010512 Protect-A-Boot Spark Plug Boot Heat Shield, Black, 8 Pack
(Part #35610512)
                        

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

  • Double-wall construction for added durability
  • Helps prevent burn-through, hardening and cracking of boots
  • Installs in seconds
  • Universal-fits most straight or angled boots
  • Withstands 1200°F direct continuous heat
  • Non-flammable & protects against chemicals & resists water

Protect-A-Boot Instructions (PDF)

Exhaust Wrap Frequently Asked Questions (PDF)  

DEi 010511 Protect-A-Boot Spark Plug Boot Heat Shield, Black, 2 Pack
(Part #35610511)
                        

Protect-A-Boots are made from a high temperature resistant glass fiber material and treated with a proprietary coating, Protect-A-Boots provide spark plug boot and wire protection from extreme under hood heat.

  • Double-wall construction for added durability
  • Helps prevent burn-through, hardening and cracking of boots
  • Installs in seconds
  • Universal-fits most straight or angled boots
  • Withstands 1200°F direct continuous heat
  • Non-flammable & protects against chemicals & resists water

Protect-A-Boot Instructions (PDF)

Exhaust Wrap Frequently Asked Questions (PDF)