Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs

SAME DAY SHIPPING! Order within the next 13 hours 3 minutes and receive same day shipping

Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs

Click image to enlarge

Speeday Motors Logo
X
Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

BluMax Stud Girdles are designed to eliminate rocker stud flexing and provide more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These lightweight, spring-loaded, 6061 T-6 aluminum stud girdles include 3/8" polylocks.

For S/B Chevy V8. 

  • Polylocks included
  • Anodized for a superior finish
  • More consistent high-RPM performance
  • Easy and quick removal and replacement
  • Made from the finest quality billet aluminum
  • Pre-machined to allow for vacuum pump airflow

 

Application

  • 262 1985-00
  • 265 1955-57
  • 267 1979-82
  • 283 1957-67
  • 302 1967-68
  • 305 1976-00
  • 307 1968-73
  • 327 1962-69
  • 350 1967-00
  • 400 1970-80

Notes

These stud girdles will not work with center bolt valve covers and the valve cover bolt would have to pass through the girdle. Machine work on the girdle would possibly solve the problem but would take away from the integrity of the girdle. The other option would be to use an earlier valve cover adapter in conjunction with the stud girdle.

You may also be interested in:

Small Block Chevy Stainless Steel Roller Rocker Arms, 1.5:1, 3/8 Stud
                        

These small block Chevy stainless steel roller rockers are built of 15-5PH material which gives you superior strength over other stainless rockers. They have more needle bearings which increases strength while reducing friction. Built to clear 1.55" valve springs.

  • Designed for higher open valve spring pressures
  • Strong 15-5PH stainless steel
  • Specially cast and machined for larger valve springs and retainers
  • Light weight with integral pushrod seat
  • Oversize trunions and full roller precision needle and cage bearings
  • More needle bearings for increased performance and rocker life
  • CNC machined pushrod cups and heat-treated Cr40 roller tips
  • Internal oiling system for long lasting performance
  • H.D. Polylocks included
Blumax Small Block Chevy Aluminum Roller Rocker Arms, 1.5:1, 3/8 Stud
                        

BluMax aluminum roller rockers are built of the finest 6061 aluminum extrusions which gives you superior strength over other rockers. Rockers are specially machined to allow for larger 1.55" springs and retainers with full-cage friction reducing needle bearings for added durability. The nose rollers and shafts are Cr40 steel, heat-treated and hardened to minimize the wear that naturally occurs between the roller tip and the valve stem. Includes polylocks.

  • Designed to meet the demands of most high-lift roller camshaft profiles
  • Specially machined to accommodate larger valve springs and retainers
  • SAE-52100 Full complement precision needle and cage roller bearings
  • Anodized for a superior finish and to reduce operating temperatures
  • CNC machined pushrod cups and heat-treated Cr40 roller tips
  • Internal oiling system for long lasting performance
  • H.D. polylocks included

 

Platinum Series Small Block Chevy Shaft Rocker Arms 1.6:1
                        

Any top quality engine you look at will have shaft type rocker arms on it, whether it's NASCAR, NHRA or Bonneville racing. The reason is they are the strongest, most reliable rocker arm money can buy. 

These include fully machined aluminum rockers, premium centerless ground shafts and needle bearings, alloy fasteners and tool steel lash adjusters.

For S/B Chevy with 23-degree valve aftermarket heads. 

Instructions (PDF) 

Small Block Chevy Two-Piece Stud Girdle, 7/16 Inch Studs
                        

BluMax Stud Girdles are designed to eliminate rocker stud flexing and provide more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These lightweight, spring-loaded, 6061 T-6 aluminum stud girdles include 7/16" polylocks.

For S/B Chevy V8. 

  • Polylocks included
  • Anodized for a superior finish
  • More consistent high-RPM performance
  • Easy and quick removal and replacement
  • Made from the finest quality billet aluminum
  • Pre-machined to allow for vacuum pump airflow

 

Small Block Chevy One Piece Stud Girdle with 3/8 Inch Rocker Studs
                        

BluMax Stud Girdles are designed to eliminate rocker stud flexing and provides more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These aluminum stud girdles include 3/8" polylocks.

  • Polylocks included
  • Anodized for a superior finish
  • More consistent high-RPM performance
  • Easy and quick removal and replacement
  • Made from the finest quality billet aluminum
  • Pre-machined to allow for vacuum pump airflow

Solid Bar Design, 6061 T-6 aluminum, includes ROCKER-LOC adjusters.