(0)
Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

Small Block Chevy Sportsman Steel Roller Tip Rocker Arms, 1.5:1, 3/8 Stud

Price:$84.99
S/B Chevy - 1.5 Ratio - 3/8" Stud
Price:
$84.99
ST
In Stock
Item #:
57583501
 
(4 Ratings)
Click image to enlarge Click image to enlarge
No video at this time.
 

If your class or budget does not allow aluminum or stainless roller rocker arms, check out these steel roller tip rockers. Made from 4340 heat treated chromoly steel, they feature a longer slot to eliminate stud bind issues. Plus, the roller tip minimizes scrubbing (the result of the valve stem pushing hard against the valve guide), reducing friction and freeing up an additional 15 to 30 horsepower over stock rockers.

  • 4340 steel rocker body
  • Adds up to 30 HP over stock rockers
  • Excellent replacement for stock or sportsman engines
  • Eliminates noise & slop associated with worn or high mileage rockers
  • Includes polylocks and grooved balls
  • 262 V-8
  • 265 V-8 1955-1957
  • 267 V-8 1979-1982
  • 283 V-8 1957-1967
  • 302 V-8 1967-1968
  • 305 V-8 1976-2000
  • 307 V-8 1968-1973
  • 327 V-8 1962-1969
  • 350 V-8 1967-2000
  • 400 V-8 1970-1980
Reviews for Item #: 57583501
REVIEWED BY 4 CUSTOMERS
Sort by:
Displaying Reviews 1-4 of 4
Processing

[ 1 of 1 customers found this review helpful ]
 

Good quality at a great price.

By C-10 nut from Battle Ground, WA on 7/21/2010
Bottom Line: Yes, I would recommend this to a friend

The product was nicely finished and the installation a breeze.

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:


 

Now This is a bargin

By cartoon14 from Louisville, KY on 7/25/2010
Bottom Line: Yes, I would recommend this to a friend

I couldn't ask for a better overall product. The fit was right on. Product finish is exceptional. Price is right.

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:


 

Nice for the price!!!

By Wild Card from San jose california.... on 10/21/2011
Pros:
Easy To Install, Great little item, Improves Engine Efficienc, Increases Power
Car & Truck:
Auto Enthusiast, Casual Driver, Competitive Driver, Mechanic
Best Uses:
Everyday Driving, Performance Driving, Replacement
Bottom Line: Yes, I would recommend this to a friend

Considering the price...This is one of the best upgrades for a stock to mild motor....

Service & Delivery comments:

Service was fantastic and delivery fast !!! Tech was on the money with their advice !!!

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:


 

A great product for the money

By BUFF'S 36 from CANYON LAKE, CALIF. on 4/14/2012
Pros:
Durable, Easy To Install, Improves Engine Efficienc
Describe Yourself:
Auto Enthusiast
Cons:
Heavy
Best Uses:
Everyday Driving, Replacement
Bottom Line: Yes, I would recommend this to a friend

Be sure to use the lock down set screws before, during and after adjusting to zero lash because they do loosen themselves.

Was this review helpful to you? Yes / No - You may also flag this review.
Please let us know what kind of issue this is:









Email Address:

Comments:


Displaying Reviews 1-4 of 4
 

Questions and Answers for Item #: 57583501

Get your questions answered by the community. Ask or answer questions below.

7 Questions | 7 Answers
Displaying Questions 1-5 of 7
Processing

Q:

do i need longer push rods for theses rockers

Asked on 1/2/2011 3:02:05 AM by zook from fremont ohio

Answers (1) Know the answer? Answer this question

Q:

Good Day Folks! I would like to know if these rockers would provide good longivity with valve spring pressure of 330 pound open? I would like to purchase them for my circle track car. What are the maximum spring pressures they were designed for? Thank you! Lrr

Asked on 2/3/2011 4:32:52 AM by BOWTYGUY55 from New York

Answers (1) Know the answer? Answer this question

Q:

Do they fit self aligning heads as in the 1996-1999 5.7L Vortec engine?

Asked on 5/3/2011 8:16:46 AM by Frank from Sebastopol, Ca

Answers (1) Know the answer? Answer this question

Q:

Sense I am a street roder and want to keep the stock look to my engine, can these rockers be used in a stock rocker cover?

Asked on 5/16/2011 12:12:53 AM by G-Man from Clackamas Oregon

Answers (1) Know the answer? Answer this question

Q:

HI, Will the Sportman Steel Roller Rockers work with a flat tippet cam / Hydraulic Lifters. 1992 GMC New 5.7L Engine. I'm looking to move up with Roller Rockers. The flat tippet cam is high performance. Thanks again for the help Bill.

Asked on 8/1/2011 3:12:34 PM by Bill from Las Vegas, NV.

Answers (1) Know the answer? Answer this question
Displaying Questions 1-5 of 7

Do you have a question about this product?

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Our Techs also Suggest the Following:
3/8" POLY LOCKS, SET OF 16
Price:
$29.99
ST
In Stock
Item #:
Item Details:
For aluminum roller rockers w/o stud girdle.
 
(1 Rating)
7/16" POLY LOCKS, SET OF 16
Price:
$32.99
ST
In Stock
Item #:
Item Details:
For aluminum roller rockers w/o stud girdle.
 
(1 Rating)