Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Small Block Chevy Oval Track Small Base Solid Lifter Cam 2500-7900 RPM

SAME DAY SHIPPING! Order within the next 14 hours 50 minutes and receive same day shipping

Specs
Sold in Quantity:
Each
RPM Range:
2500 to 7900
Intake Duration:
284
Exhaust Duration:
289
Lobe Separation:
105
Camshaft Type:
Solid Flat Tappet
Intake Duration @ .050" Lift:
258
Exhaust Duration @ .050" Lift:
264
Small Block Chevy Oval Track Small Base Solid Lifter Cam 2500-7900 RPM

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These "small base circle" cams are custom ground to our specs by Comp Cams. They feature extra an extra machining process to clearance the lobes so they do not contact the connecting rods on stroker motors. Always test-assemble your engine combination and verify clearance between the connecting rods and the rest of the engine. The small base circle is 1.060" to 1.090" depending on the camshaft.

Cam Application Chart (GIF)

Item Details

Good short track cam, lots or torque.

Customer Reviews

This product has no reviews.

Product Q&A

3 questions : 3 answers

1 answers

is this cam drilled for accessory drive for sprint cars

honesthog
March 22, 2014

is this cam drilled for accessory drive for sprint cars

Answers

March 24, 2014
EricM
No this cam is not threaded on the back side.
1 answers

What Timing should I run with this Cam P/N 282-12002? I have it in a 360 Chevy short track engine.

Speed
Atlanta, GA, USA
December 13, 2013

What Timing should I run with this Cam P/N 282-12002? I have it in a 360 Chevy short track engine.

Answers

December 16, 2013
EricM
Most SBC race engines make the best power somewhere between 32 degrees and 38 degrees of total timing.
1 answers

would this cam be a good choice for an IMCA modified with a 383?

mrfixxit71
Texas, USA
April 06, 2015

would this cam be a good choice for an IMCA modified with a 383?

Answers

April 07, 2015
EricM
Yes this camshaft will make excellent power in a 383 for an IMCA Modified.
Page 1 of 1

You may also be interested in:

COMP Cams Small Block Chevy Oval Track Solid Lifter Cam, 3000-8000 RPM
(Part #28212000)
                        

These "small base circle" cams are custom ground to our specs by COMP Cams. They feature extra an extra machining process to clearance the lobes so they do not contact the connecting rods on stroker motors. Always test-assemble your engine combination and verify clearance between the connecting rods and the rest of the engine. The small base circle is 1.060" to 1.090" depending on the camshaft.

Cam Application Chart (GIF)

COMP Cams Small Block Chevy Oval Track Solid Lifter Cam, 2500-8000 RPM
(Part #28212001)
                        

These "small base circle" cams are custom ground to our specs by COMP Cams. They feature extra an extra machining process to clearance the lobes so they do not contact the connecting rods on stroker motors. Always test-assemble your engine combination and verify clearance between the connecting rods and the rest of the engine. The small base circle is 1.060" to 1.090" depending on the camshaft.

Cam Application Chart (GIF)

COMP Cams 159-12 Engine Break-In Lube Oil Additive
(Part #282159)
                        

ZDDP-enhanced Engine Break-In Lube Oil Additive from COMP Cams provides maximum engine life while also allowing it to reach its full performance potential. It does so by improving the surface mating of valve train components (especially flat tappets), rotating assembly, rod journals, piston rings, valve guides and other vital areas of the engine. This proprietary break-in lube formula includes the optimum amount of critical additives ZDDP (Zinc & Phosphorus), Molybdenum, detergents and high grade base oil.

The multi-viscosity, mineral-based COMP Cams Engine Break-In Oil Additive is fully-formulated and requires no additives or supplements. In addition, the oil is fully compatible with gasoline, methanol and high octane racing fuels.

COMP Cams 2900-16 Chevy Solid Lifters
(Part #28281316)
                        

COMP Cams Performance Series Solid/Mechanical Lifters are premium lifters designed specifically for high-end street and race applications. Built to extreme precision tolerances to create the most durable solid lifters available, Performance Series Lifters are engineered to handle elevated, race application valve spring pressures. Each lifter features a precision-ground crown radius and surface finish to extend high-rpm durability and promote compatibility with performance camshafts.

  • Precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability
  • Lightweight design and premium one-piece pushrod seat provide an extended rpm range
  • Precision-machined and accurately located oil band to yield a consistent, properly metered oil flow
  • Designed for elevated, race application valve spring pressures
  • Ideal for high-end street and race engines
COMP Cams 800-16 Chevy Solid Lifters with Oil Hole
(Part #28280016)
                        

With the increased rpm, additional spring pressure and aggressive cam designs of today’s performance engines, premature cam wear is a major problem. COMP Cams has answered the challenge with the new Oil Injection solid mechanical lifters that feature a precision 0.012” oil feed hole in the cam face. The added oiling capacity creates a boundary layer that protects both the lifter and cam lobe from excessive wear.  

COMP Cams lifters are manufactured to the highest standards and when used with their oil additive, will give you the best results.