Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Small Block Chevy One Piece Stud Girdle with 3/8 Inch Rocker Studs

Price:$91.99
One Piece Stud Girdle with 3/8" Rocker Studs
Price:
$91.99
PR
In Stock
Item #:
57515352
Small Block Chevy One Piece Stud Girdle with 3/8 Inch Rocker Studs
Click image to enlarge Click image to enlarge
  • Small Block Chevy One Piece Stud Girdle with 3/8 Inch Rocker Studs
  • Small Block Chevy One Piece Stud Girdle with 3/8 Inch Rocker Studs
No video at this time.
 

BluMax Stud Girdles are designed to eliminate rocker stud flexing and provides more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These aluminum stud girdles include 3/8" polylocks.

  • Polylocks included
  • Anodized for a superior finish
  • More consistent high-RPM performance
  • Easy and quick removal and replacement
  • Made from the finest quality billet aluminum
  • Pre-machined to allow for vacuum pump airflow

Solid Bar Design, 6061 T-6 aluminum, includes ROCKER-LOC adjusters.

  • 265 V8 1955-57
  • 267 V8 1979-82
  • 283 V8 1957-67
  • 302 V8 1967-68
  • 305 V8 1976-00
  • 307 V8 1968-73
  • 327 V8 1962-69
  • 350 V8 1967-00
  • 400 V8 1970-80
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Platinum Series Shaft Rocker Arms - Chevy 1.5 Ratio
    Platinum Series Shaft Rocker Arms - Chevy 1.5 Ratio
    Price: $454.99
    More Info
    Platinum Series Shaft Rocker Arms - Chevy 1.5 Ratio
    x 
    							                        
    
                                                        
    Any top quality engine you look at will have shaft type rocker arms on it, whether it's NASCAR, NHRA or Bonneville racing. The reason is they are the strongest, most reliable rocker arm money can buy. 
    These include fully machined aluminum rockers, premium centerless ground shafts and needle bearings, alloy fasteners and tool steel lash adjusters. 
    For S/B Chevy with 23-degree valve aftermarket heads.  
    Instructions (PDF)  
  • Platinum Series Small Block Chevy Shaft Rocker Arms 1.6:1
    Platinum Series Small Block Chevy Shaft Rocker Arms 1.6:1
    Price: $454.99
    More Info
    Platinum Series Small Block Chevy Shaft Rocker Arms 1.6:1
    x 
    							                        
    
                                                        
    Any top quality engine you look at will have shaft type rocker arms on it, whether it's NASCAR, NHRA or Bonneville racing. The reason is they are the strongest, most reliable rocker arm money can buy. 
    These include fully machined aluminum rockers, premium centerless ground shafts and needle bearings, alloy fasteners and tool steel lash adjusters. 
    For S/B Chevy with 23-degree valve aftermarket heads.  
    Instructions (PDF) 
  • Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    Price: $74.99
    More Info
    Small Block Chevy Two-Piece Stud Girdle, 3/8 Inch Studs
    x 
    							                        
    
                                                        
    BluMax Stud Girdles are designed to eliminate rocker stud flexing and provide more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These lightweight, spring-loaded, 6061 T-6 aluminum stud girdles include 3/8" polylocks. 
    For S/B Chevy V8.  
    • Polylocks included 
    • Anodized for a superior finish 
    • More consistent high-RPM performance 
    • Easy and quick removal and replacement 
    • Made from the finest quality billet aluminum 
    • Pre-machined to allow for vacuum pump airflow
     
  • Small Block Chevy One Piece Stud Girdle with 7/16 Inch Rocker Studs
    Small Block Chevy One Piece Stud Girdle with 7/16 Inch Rocker Studs
    Price: $91.99
    More Info
    Small Block Chevy One Piece Stud Girdle with 7/16 Inch Rocker Studs
    x 
    							                        
    
                                                        
    BluMax Stud Girdles are designed to eliminate rocker stud flexing and provides more accurate valve lift and timing. They are specially machined to accommodate vacuum pump and crank case evacuation components. These aluminum stud girdles include 7/16" polylocks. 
    • Polylocks included 
    • Anodized for a superior finish 
    • More consistent high-RPM performance 
    • Easy and quick removal and replacement 
    • Made from the finest quality billet aluminum 
    • Pre-machined to allow for vacuum pump airflow
    Solid Bar Design, 6061 T-6 aluminum, includes ROCKER-LOC adjusters.