Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Speedway Chevy Mini Starter, 2.0 kW, Plain

SAME DAY SHIPPING! Order within the next 11 hours 4 minutes and receive same day shipping

Specs
Overall Height:
6.000
Overall Width:
4.875
Overall Length:
8.500
Weight:
11.20
Sold in Quantity:
Each
Shaft Diameter:
1.000
Tooth Count:
9
Hardware Included:
Yes
Speedway Chevy Mini Starter, 2.0 kW, PlainSpeedway Chevy Mini Starter, 2.0 kW, PlainSpeedway Chevy Mini Starter, 2.0 kW, PlainSpeedway Chevy Mini Starter, 2.0 kW, PlainSpeedway Chevy Mini Starter, 2.0 kW, Plain
Speedway Chevy Mini Starter, 2.0 kW, Plain

Click image to enlarge

Speeday Motors Logo
X
Speedway Chevy Mini Starter, 2.0 kW, Plain

Details

Reviews

Q & A

What's in the Box

High torque, high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines.

Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

Only 1-1/2 lb. heavier and 1" longer than the 1.4 kW version.

From the centerline of the mounting bolt holes to the end of the starter is 7-3/4" 

Chevy Mini Starter Installation Instructions (PDF)

Specs


Item Details

190 ft. lbs.

You may also be interested in:

Speedway Chevy Lightweight Starter, 1.0 kW
                        

Feather light, but built to last! Unique gear reduction design is compact but can be rotated 360° and works with 153 and 168 tooth flywheels. Fits Chevy with straight bolt pattern.

  • Weighs 7-1/2" lbs
  • Up to 10:1 compression
  • Includes mounting bolts shims
  • 3" diameter motor
Hitachi Enforcer Chevy Mini Starter, 1.0 kW
                        

There is no starter smaller and lighter than this 100% brand new Hitachi starter. This starter can be rotated 360° and its compact size allows it to fit where no other can. For 153 or 168 tooth flywheels and straight bolt patterns.

  • Up to 10:1 compression
  • 1.0 kw motor
  • 6:1 gear reduction
  • 7-1/2" lbs.
  • Includes ARP bolts and shims
Speedway Chevy Mini Starter, 1.4 kW, Plain
                        High-torque, 1-1/2 HP high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines. 

Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

910-67440 Instructions (PDF)

MSD 5095 DynaForce Chevy Starter
                        

The new DynaForce Starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The DynaForce Starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans, but just in case, we made the billet mount so it can be clocked in different positions to help in tight applications. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.

  • Fits Chevy V8, 153 and 168 tooth flywheels
  • Mount is for straight bolt pattern
  • Gear reduction of 4.4:1 improves torque for great cranking
  • Three horsepower motor provides power for high compression engines
  • Ball bearing supported armature and pinion gear
  • Downsized design helps clearance issues with oil pans and exhaust
  • Mount can be clocked to assist in mounting

 

547-5095 Instructions (PDF)

MSD Rebate (Link)

Tuff Stuff Chevy Super-Mini Starter, 153 or 168 Tooth Flywheel
                        

These are called "super" starters because they put out a whopping 2.6 hp. If you don't want to worry if your starter will crank over your high compression engine, get one of these. Choose plain black or chrome finish.

  • Works with 153 or 168 tooth flywheels 
  • Small and Big Block Chevy engines
  • Works with big cubic inch high compression engines
  • Generates 2.6 horsepower
  • 1.6 kilowatts
  • Gear Reduction
  • Choose either:
    • PLN = Black finish 
    • CHR= Chrome finish
Tuff Stuff Super-Lite Chevy Starter
                        

This is the smallest, lightest mini starter made for Chevy engines. Weighing in at only 7.5 lbs., this starter allows you to index it to clear headers or exhaust. It has a 6:1 gear reduction and has a permanent magnet motor rated at 1.6 hp.

Available in plain or chrome finishes. Fits 153 or 168 tooth flywheels. 

Chevy Mini Starter Shim & Bolt Set
                        Set includes 3-3/4" long bolts with shims for Chevy mini starters with straight bolt pattern (not angled).
                    
Speedway Chevy Starter
                        

Compact 3 horsepower Speedway Starter by Stephenville Electric. New proprietary design to crank those high compression and big cubic inch Chevy engines. Each starter is dyno tested.

Includes shims and mount bolts. Fits both SBC and BBC engines.

Quick Disconnect Harness for Mini Starters
                        

This slick little wiring harness is just the ticket for those of you that change engines often or if the solenoid is hard to get at. Just unplug and drop the starter out. Simply snaps on the solenoid and features a weather pack connector to ensure a corrosion free connection.

NOTE: Does not fit Powermaster XS style starter.

Plain Aluminum Chevy Compact Mini Starter Heat Shield/Cover
                        

Aluminum heat shields are a must for any Chevy race engine. Prevents the heat of your exhaust from cooking the starter and solenoid. Easy to install.

Cover fits Speedway starter motors # 91067440 and 91067439.