Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Single Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Single Taper

Price:$0.65
Steel Lug Nut 7/16" Fine, Single Sided
Price:
$0.65
EA
In Stock
Item #:
91003911
Single Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Single Taper
Click image to enlarge Click image to enlarge
No video at this time.
 

Use these oversized 1 Inch Hex Steel lug nuts in plane of those 'puny' stock size lug nuts.

You will need a 1" hex (6-sided) socket. 

7/16" Fine Thread fits most GM mid-size cars.

  • 45° taper
  • 7/16" RH Fine Thread, Single Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
Industrial Tap, 7/16"-20 SAE, RH
Price:
$11.99
EA
In Stock
Item #:
91281033
You May Also Be Interested In...
  • Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    (3 Ratings)
    Price: $0.75
    More Info
    Double Sided Steel Lug Nut, 5/8 Inch RH Coarse Thread, Double Taper
    x 
    							                        
    
                                                        
    Use these oversized 1 Inch Hex Steel  lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening. 
    You will need a 1" hex (6-sided) socket.                                              
    5/8" Coarse Thread fits most racing wheels.
    • 45° taper
    • 5/8" RH Coarse Thread, Double Taper
    What's The Angle
    Most  racing wheels have  a 45° seat  for the lug nut to seat in while most  street wheels use 60°.  By using  45° the lug nut is able to clamp  tighter over a larger area,  which  helps keep your wheels on the car  where they belong. 
    If you  mix  and match street and race wheels  or lug nuts you are just asking  for  trouble. All our lug nuts are 45°  and designed to be used with  racing  wheels. 
     
  • Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper
    Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper
    Price: $0.75
    More Info
    Double Sided Steel Lug Nut, 7/16 Inch RH Fine Thread, Double Taper
    x 
    							                        
    
                                                        
    Use these oversized 1 Inch Hex Steel  lug nuts in plane of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening. 
    You will need a 1" hex (6-sided) socket.                                              
    7/16" Fine Thread fits most GM mid-size cars.
    • 45° taper
    • 7/16" RH Fine Thread, Double Taper
    What's The Angle
    Most  racing wheels have  a 45° seat  for the lug nut to seat in while most  street wheels use 60°.  By using  45° the lug nut is able to clamp  tighter over a larger area,  which  helps keep your wheels on the car  where they belong. 
    If you  mix  and match street and race wheels  or lug nuts you are just asking  for  trouble. All our lug nuts are 45°  and designed to be used with  racing  wheels. 
     
  • AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread
    AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread
    (1 Rating)
    Price: $1.99
    More Info
    AFCO 10149 1 Inch Hex Steel Lug Nut, 7/16 Inch RH Fine Thread
    x 
    							                        
    
                                                        
    Use these oversized AFCO 1 Inch Hex Steel  lug nuts in plane of those  'puny' stock size lug nuts.  
    You will need a 1" hex (6-sided) socket.                                              
    7/16" Fine Thread fits most GM mid-sized cars.
    • 45° taper
    • 7/16" RH Fine Thread, Single Taper
    What's The Angle
    Most    racing wheels have  a 45° seat  for the lug nut to seat in while most    street wheels use 60°.  By using  45° the lug nut is able to clamp    tighter over a larger area,  which  helps keep your wheels on the car    where they belong. 
    If you  mix  and match street and race wheels    or lug nuts you are just asking  for  trouble. All our lug nuts are  45°   and designed to be used with  racing  wheels.