Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Simpson 5-Point Harness, Wrap Around, Quarter Midget Seat Belt

Specs
Overall Width:
2.00
Color:
-
Sold in Quantity:
Set
SFI Rating:
16.1
Hardware Included:
No
SFI Rated:
Yes
Seat Belt Buckle Type:
Latch & Link
Seat Belt Style:
Pull Down
Seat Belt Mounting Style:
Wrap Around
MFG. Part #:
-
Garage Sale:
No
Simpson 5-Point Harness, Wrap Around, Quarter Midget Seat BeltSimpson 5-Point Harness, Wrap Around, Quarter Midget Seat BeltSimpson 5-Point Harness, Wrap Around, Quarter Midget Seat Belt
Simpson 5-Point Harness, Wrap Around, Quarter Midget Seat Belt

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Built specifically for Quarter Midget racers. Wrap around style (pull down) with latch & link buckle.

  • Crotch strap - 15"
  • Should Strap - 33"
  • Waist Strap - 44"

Item Details

Wrap-around Style

You may also be interested in:

Seat Belt Tightener
SKU-9401160
                        This tool allows someone outside of the car to pull your lap belt tight. Steel construction with a T handle for a good grip. Comes anodized black. 
                    
Simpson Individual Arm Restraints
SKU-63031506
                        These Simpson individual arm restraints have padded arm bands and stainless steel hardware. 14" attachment straps. Available in red, blue or black.
                    
Steve Smith Autosports S294 Book - Quarter Midget Chassis Technology
SKU-91085265
                        This is the complete chassis tuning and set-up guide for quarter midgets. Includes both dirt and asphalt tech. 
                    
Kirkey Junior 24 Series 8 Degree Aluminum Racing Seat
SKU-96024000
                        

All of the benefits of KIRKEY's professional racing seats mean better lap times for you. Full size comfort and safety. All of KIRKEY Racing Fabrications smaller sized 24 Series seats are designed and manufactured with the same care and attention to detail as our other professional racing seats. TIG and MIG welded and reinforced in critical areas. Includes multi-level shoulder harness and sub belt cutouts.

  • TIG welded .100" thick 5052 grade aluminum
  • 8 Degree Layback Style
  • MIG welded inside for added strength
  • Headrest is reinforced with offset aluminum extrusion
  • Water resistant nylon upholstery is double stitched around belt openings and all stress points
  • Multi-level shoulder harness cutouts and submarine belt opening are standard
  • This seat has rib supports and headrest lowered one inch for smaller children 

Your choice of 8 Degree Layback in 10", 11", 12", 13" or 14" widths. Includes black cover. 

Kirkey Seat Design Illustration (GIF)

960-24000 Instructions (PDF)

Simpson Quarter Midget Cage Net
SKU-6303605
                        

Just the right size for quarter midgets.

The simpson quarter midget cage net can be adjusted from 23" to 28" in length. It is 7-1/2" wide at widest point.

Choose either black, blue, or red. 

Simpson 5-Point Racing Harness, Bolt In, Quarter Midget Seat Belts
SKU-63029026
                        Built specifically for Quarter Midget racers. Bolt-in style (pull down) with latch & link buckle.
                    
Bell K1 Sport SA10 Racing Helmet
SKU-210210
                        The Bell K1 Sport is a multi-use, full featured racing helmet with aero styling and Bell's innovative Dominator chin bar design. The K1's aerodynamic features enhance the helmet's stability in high-speed racing environments. The Snell SA2010 rated K1 Sport is a great race helmet for open wheel racers or kart racers who plan on moving into other forms of racing that require fire retardant helmets.

The K1 Sport features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K1 Sport Racing Helmet takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.

The K1 Sport Helmet also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can customize the fit of the K1 Sport Helmet by using Bell's Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The race helmet is available in White and Rubberized Matte Black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The K1 Sport is pre-drilled for use with head and neck restraint devices.

Bell Helmet Sizing Chart (PDF)

Proper Fitting Guidelines (PDF)

Bell GP2K Kart Racing Helmet
SKU-210906
                        

The GP2K racing helmet is certified to the Snell K2010 standard which requires the helmet to be tested to the Snell SA2010 standard test criteria but does not require the helmet to be fire retardant.

The GP2K race helmet takes a 287 SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The GP.2K also features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the GP2K by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the GP2K in the event the front interior chin piece needs to be replaced. Available in White.

Bell Helmet Sizing Chart (PDF)

Proper Fitting Guidelines (PDF)

 

Bell Vador SA2010 Racing Helmet
SKU-210930
                        

The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.

The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.

The Vador features Bell's redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bell's Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a rubberized surface that is more resistant to finger prints and smudges.

The Vador is set up for use with Head and Neck Restraint devices and features Bell's M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)

Size Chart

Bell GP2 Youth Racing Helmet, Youth Series
SKU-210901
                        

The GP.2 Youth helmet is designed for young racers who need an extra small size helmet that is fire retardant. The GP.2 Youth has the same design features as the adult GP.2 model. The GP.2 Youth is SFI 24.1 certified – the SFI 24.1 standard is accepted by various youth racing and karting organizations including the Quarter Midget Association of America (QMA). Metallic Silver

  • Formula Style Helmet
  • Advanced Aerodynamic Styling
  • Air Intake To Maximize Forehead Ventilation
  • Direct Flow Chin Bar Ventilation
  • Youth Size Shell
  • Lightweight Composite Shell Technology
  • Standard Eyeport
  • Positive Seal Visor System
  • 287/3MM SRV Shield (SRV-1 Pivot System)
  • E-Max Plus Multi Density Liner
  • Pro Style Comfort-Plus Interior
  • Removable/Replaceable Cheek Pads
  • SFI 24.1 Youth Certification
  • Available in sizes 4XS to XS
Impact NecksGen REV Head and Neck Restraint System
SKU-44991002
                        The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind.  Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones.  Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.
  • SFI 38.1
  • Patent pending tension neutralizing tether provides superior lateral and frontal support
  • Weighs just over 1 lb.
  • Allows for quick entry and exit of the car
  • Ergonomic design offers little to no interference with seat or helmet
  • Carbon fiber composite construction
  • Works in any race car and every seat angle
  • Available in Small, Medium, or Large

Sizing Specifications

Impact NecksGen REV Features (PDF)

Impact Necksgen Head & Neck Restraint Small/Youth, SFI 38.1, Adjusts
SKU-4499100-S
                        

Clearance!! 

 NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind.  Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones.  Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.

  • MADE IN THE USA!!!
  • SFI 38.1 Compliant.
  • Adjustable - Adjusts between 10 - 40 degrees for a Variety of Uses.
  • Lightweight - Weights Less than Than 2 Pounds (1.8 pounds of 816.5 grams)
  • Comfortable - Body Forming Shoulder Pads offer Superior Comfort.
  • SAFE - Offers Superior Angular Impact Protection.
  • Made from Carbon Fiber DuPont Composite Materials

Impact NecksGen now comes in 3 sizes. Large unit fits most adults, typically a driver 100 lbs or more. Medium unit is for smaller torso drivers 1" narrower but still accepts 2" or 3" seat belts. Youth unit, also fits small torso drivers, typically youth drivers between 7 and 16 years old. Youth size accommodates only a 2" seat belt.

Sizing Specifications

Impact NecksGen FAQ's and Features (PDF)