Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Power Tools At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

"Tools, Power Tools" Page 1 of 1

All

New

Garage Sale

  • Wheel Stud Drill Bit
    $9.99
    Product Rating: 3.74 Stars
    Wheel Stud Drill Bit
    (Part #91082007)
    x
                

    43/64" wheel stud drill bit with 1/2" shank. Used to drill out hubs and axle flanges for 5/8" wheel studs with .685 knurl diameter.

  • Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    (Part #72812086)
    x
                
    These 3-piece impact grade power extension bar sets work great for adapting larger or smaller sized sockets to be used with power drills and drivers.
    • Adapts sockets to power drills and drivers
    • Detent ball for secure socket retention
    • 1/4" shank
    • 6” Overall Length
    • Includes: 1/4”, 3/8”, and 1/2” Drive Extension Bar
  • Center-It Drill Press Block
    $14.99
    Product Rating: 5.00 Stars
    Center-It Drill Press Block
    (Part #91081028)
    x
                With this great little tool you will no longer struggle trying to drill a hole in a piece of round tubing. Once set-up, its centered for all sizes. 
            
  • Hole Saw Blades
    $6.99
    Product Rating: 5.00 Stars
    Hole Saw Blades
    (Part #91089)
    x
                High-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.
            
  • Titan Tools 22504 7 Inch Polisher
    $84.99
    $89.56
    Titan Tools 22504 7 Inch Polisher
    (Part #72822504)
    x
                
    • 11 Amp
    • Adjustable dial speed control
    • Lock-on switch for comfort during extended use
    • Auxiliary handle mounts either side for left or right-hand use
    • Includes Velcro pad for sandpaper, and rubber pad for polishing bonnet
    • Also great for grinding tires
  • Titan Tools 16207 3/8 Inch Keyless Drill Bit Chuck
    Titan Tools 16207 3/8 Inch Keyless Drill Bit Chuck
    (Part #72816207)
    x
                

    This 3/8" keyless quick release drill bit chuck adapter from Titan Tools is a conversion for a 1/4" impact drive. It features a 1/4" Hex shank.

    • 3/8" Keyless chuck adapter
    • 1/4" Hex shank
    • Conversion for 1/4" impact drive
  • Titan Tools 22160 24V Cordless Impact Wrench
    Titan Tools 22160 24V Cordless Impact Wrench
    (Part #72822160)
    x
                
    • Delivers 280 lb/ft of maximum torque
    • 1/2" drive anvil is heat treated
    • Heavy duty alloy gear case
    • Durable all-metal transmission
    • 1-Hour quick charger
    • Includes durable blow mold carrying case
  • Titan Tool 12082 3 Piece 3 Inch Impact Grade Power Extension Bar Set
    Titan Tool 12082 3 Piece 3 Inch Impact Grade Power Extension Bar Set
    (Part #72812082)
    x
                

    These 3-piece impact grade power extension bar sets work great for adapting larger or smaller sized sockets to be used with power drills and drivers.

    • Adapts sockets to power drills and drivers
    • Detent ball for secure socket retention
    • 1/4" shank
    • Includes: 1/4”, 3/8”, and 1/2” Drive Extension Bar
  • Titan Tools 22525 4-1/2 Inch Angle Grinder
    Titan Tools 22525 4-1/2 Inch Angle Grinder
    (Part #72822525)
    x
                These angle grinders are great for almost any custom fabrication project.  They feature a locking trigger switch with a convenient 3 position handle.
    • 4-1/2" 8 amp Angle grinder
    • Locking trigger switch
    • 11,000 no load RPM
    • 5/8" arbor
    • Metal Gear housing
    • 3 position handle
    • 14" overall length
    • 6-1/2' cord
  • Titan Tools 16503 3-Piece Step Drill Bit Set
    Titan Tools 16503 3-Piece Step Drill Bit Set
    (Part #72816503)
    x
                
    • High speed steel with titanium finish
    • Drill multiple sizes with each bit
    • 28 hole sizes in 3 bits:
      • Bit one: 13 sizes from 1/8" to 1/2"
      • Bit two: 6 sizes from 3/16" to 1/2"
      • Bit three: 9 sizes from 1/4" to 3/4"
  • Titan Tools 11003 Micro Drill Set with Driver
    Titan Tools 11003 Micro Drill Set with Driver
    (Part #72811003)
    x
                

    This Micro drill set from Titan Tools comes with a driver and 27 pieces. The set has 24 drill bits, 2 bits of each size for convenience.

    Includes:

    • (1) Micro driver
    • (2) Dual-End Collets
    • (2) #52 (.0635)
    • (2) #54 (.0550)
    • (2) #56 (.0465)
    • (2) #58 (.0420)
    • (2) #60 (.0400)
    • (2) #62 (.0380)
    • (2) #64 (.0360)
    • (2) #66 (.0330)
    • (2) #68 (.0310)
    • (2) #70 (.0280)
    • (2) #72 (.0250)
    • (2) #74 (.0225)
  • Double Ended 3/16 Inch Drill Bits
    Double Ended 3/16 Inch Drill Bits
    (Part #91004500)
    x
                
    • 3/16" diameter
    • Ideal for Drilling Aluminum Body Panels
    • Hardened steel shank
    • Bag of 6
  • Longacre 68604 Cordless 24 Volt Pit Gun
    Longacre 68604 Cordless 24 Volt Pit Gun
    (Part #47568604)
    x
                This set includes: Cordless impact gun with charger and two NiCad batteries, 6 point lug nut socket (1"), 3" & 5" extensions and carrying case.
    • True portability, no air hose to trip over
    • High torque - 1/2" drive, 300 ft-lbs - pops lug nuts off easily
    • 24 volts for power
    • Fast charge NiCad battery
    • Variable speed trigger 0-2000 RPM for better control
    • Battery charge indicator and LED work lights for dark areas
    • Molded rubber grip for comfort

    Instructions (PDF)
  • Titan Tools 16048 48-Piece Quick Disconnect Drill Bit Set w/ Case
    Titan Tools 16048 48-Piece Quick Disconnect Drill Bit Set w/ Case
    (Part #72816048)
    x
                Contains:
    • Countersink, magnetic extension, quick disconnect
    • Power nut drivers
    • 1" screwdriver bits - Phillips, slotted and hex
    • 2" quick-disconnect bits - Torx, Phillips, slotted and hex
    • Quick-disconnect high speed drill bits
    • Sturdy blow molded storage case and 2 removable bit cases
  • Titan Tools 16148 Tool Master Bit Set, 148 Piece
    Titan Tools 16148 Tool Master Bit Set, 148 Piece
    (Part #72816148)
    x
                Titan's 148-piece master bit sets should cover it all! They're neatly organized within an injection-molded plastic storage case.

    These boxed master bit sets contain the following:
    • 3pcs. Accessories
    • 1-60mm bit holder (Stainless)
    • 1 Quick release bit holder
    • 1-1/4"x1/4" Socket Adaptor
    • 70 Pcs.-25mm long bits
    • 8 Phillips
    • 12 Slotted
    • 8 Pozi-drive
    • 12 Hex in metric
    • 10 Hex-in Standard
    • 13 TORX
    • 3 Spline metric
    • 4- Robertson (square)
    • 49pcs. -25mm long Security Bits
    • 3 Torq
    • 4 Spanner
    • 4 Tri-Wing
    • 9 Tamper 5star
    • 14 Tamper TORX
    • 6 Tamper Hex metric
    • 6 tamper Hex standard
    • 3 25mm clutch bits
    • 13Pcs. -50mm long bits
    • 2 Pozi
    • 3 Phillips
    • 7 TORX
    • 1 Robertson
    • 13 Pcs. -75mm long bits
    • 5 Phillips
    • 5 Robertson
    • 2 Hex
    • 1 slot
  • Titan Tools 22162 Replacement Battery for Titan Impact 728-22160
    Titan Tools 22162 Replacement Battery for Titan Impact 728-22160
    (Part #72822162)
    x
                Replacement battery for 24V Titan cordless impact 728-22160.
            
  • Speedway Tapered Ball Joint Reamer, 10 Degree
    Speedway Tapered Ball Joint Reamer, 10 Degree
    (Part #91089412)
    x
                

    Tapered reamers for proper fitting of ball joints to spindles, tie rod ends to spindles, etc. These have 1/2" shank. The 2" per foot reamer, also known as a 10° tapered reamer, works with Speedway ball joints 917-20036 K727, 917-20038 K6141, 917-20038-1 K6117, and 917-20039 K6145.

    Measures a little more than 1/2" at the small end and 1" at the big end.

  • Speedway Tapered Ball Joint Reamer, 7 Degree
    Speedway Tapered Ball Joint Reamer, 7 Degree
    (Part #91089411)
    x
                

    Tapered reamers for proper fitting of ball joints to spindles, tie rod ends to spindles, etc. These have 1/2" shank. The 1-1/2" per foot reamer, also known as a 7° tapered reamer, works with Speedway ball joints 917-20031 K6024, 917-20032 K6136, and 910-34323 K772.

    Measures a little less than 1/2" at the small end and 1" at the big end.

  • AFCO 80770 Tapered Ball Joint Reamer, 7 Degree
    AFCO 80770 Tapered Ball Joint Reamer, 7 Degree
    (Part #10680770)
    x
                

    Tapered reamers for proper fitting of ball joints to spindles, tie rod ends to spindles, etc. These have 1/2" shank. The 1-1/2" per foot reamer, also known as a 7° tapered reamer, works with Speedway ball joints 917-20031 K6024, 917-20032 K6136, and 910-34323 K772.

    Measures a little less than 1/2" at the small end and 1" at the big end.

  • Titan Tools 16061 Bit Set, 61-Piece
    $9.99
    $13.89
    Titan Tools 16061 Bit Set, 61-Piece
    (Part #72816061)
    x
                Please view the product's page for more information
            
  • Titan Tools 16235 Right Angle Drill Attachment
    Titan Tools 16235 Right Angle Drill Attachment
    (Part #72816235)
    x
                

    This bit driver from Titan Tools attaches to any standard drill to convert it into a right angle tool for those hard-to-reach areas.  It features a 1/4" hex shank and a 90 degree angled head swiveling handle. This quality drill attachment is sure to help you complete your project.

    • 1/4" hex shank.
    • 90 degree angled head swiveling handle
    • Converts a drill into a right angle tool
    • Stainless outer housing
    • Comfortable grip handle

    Be sure to pick up a handy set of bits from our selection to go with your new drill attachment!