The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.
Engine Storage Stands
Engine Lift Plates
Engine Hoist Levelers
Engine Storage Bags
"Tools, Jacks, Jack Stands and Hoists" Page 1 of 2
$89.99More InfoGoJak Dollie Storage RackSKU-880456x
Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.
Rack shown with four GoJaks®, which are not included.
$44.99More InfoCasters for Engine Storage Stand, Set/4SKU-91081139x
Casters are 3" x 1-1/4" inch wide making rolling easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at 300lbs.
$249.99More InfoRace Ramps RR-FS FlatStoppersSKU-2367000x
FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.
FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.
Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.
FlatStoppers won't scratch or otherwise damage floors, and won't rust.
$13.99More InfoErnst Mfg 964 Yellow Jack Stand Covers - 4 PackSKU-91000964x
Made of high-compression, rubberized material. Fits most two-ton to six-ton jack stands. Measures 1-1/4" wide x 4-1/4" long on the inside.
$24.99More InfoTransmission StandSKU-91081201x
For storage or transporting, this 2-piece tranny stand design makes it easy. Fits Saginaw and others with short tail housing.
$6.99More InfoPerformance Tool W41032 Engine Lift ChainSKU-91089435x
24 inches of heavy duty 1000 lb load chain.
$249.99More InfoSprint Car Engine StandSKU-94081106x
This motor stand is perfect to store your engine during the offseason or use it for your spare motor. 2" casters allow you to easily roll where needed. Fits either standard or lightweight blocks.
$384.99More InfoGaerte Micro Sprint Motor StandSKU-96012813x
Use these durable engine stands from Gaerte to test or store your micro sprint motors. They feature all steel construction with adjustable support rods and convenient roller wheels for easy transportation and movability.
- For Micro sprint engines
$259.99$287.99More InfoDMI SRC-3000 Sprint Car Engine Rotator ToolSKU-94023000x
These Sprint engine tools from DMI feature quality anodized aluminum construction.
- Use this tool to run engine over for leaking down motor or setting the valves
- Splined insert ratchet allows motor you to stand on one side of the car and run all of the valves at once
$54.99More InfoOuterwears Speedway Engine BagSKU-564EB1000x
Cover your spare spare engines or protect a finished engine while it's waiting to be installed. Made from a water repellent Denier nylon. Equipped with drawstring at bottom to secure cover to stand.
$139.99More InfoRace Ramps RR-40 40 Inch Sport RampsSKU-2365000x
When sports car enthusiasts told us they wanted a simple, sleek ramp for them, we listened. Our 40 inch Sport Ramp is built just for their needs. If you want a no-fuss but still solid ramp for your sports car, this is for you. It can handle tires up to 8 inches wide and raises your car up 7 inches -- basically, it's a sweet little ramp that gives you a lot of access.
- Made of a space age foam
- Supports 3000lbs per pair
- 8 inch lift height
- Pair weighs 23lbs
- 40" long, 11" tall and 14" wide
$44.99More InfoLS1 Engine StandSKU-91081137x
This motor stand is light, compact and priced so low anyone can afford them. You can even leave the tranny attached. The stand is made with 1" x 2" x 14 gauge tubing. The mounting plate is made with 1/4" steel. The stand has 9 -1/4" clearance w/o casters to fit the deep oil pans. Mounting bolts are included.
Note: The engine storage stand will NOT clear the "batwings" of a C5 Corvette oil pan when it is bolted to an LS engine.
Add the optional caster wheel set to make it mobile.
$239.99More InfoChevy/Ford SB Shipping/Storage Container, L40 x W27 x H31 InSKU-9405108x
Keep those dents out of your trailer and keep the freight companies happy by putting your engine in a storage box like the professionals use. These engine shipping crates are designed for shipping or storage of short or long block engines. They are suitable for fork lifts and are stackable to save space.
This case works for shipping or storing new and spare engines. It's constructed of injection molded plastic. It is a two-piece container. The bottom case bolts directly to motor.
- Fits small block Chevy/Ford complete engines with most accessories
- 40" Long x 27" Wide x 31" High
- Manufactured from tough LLDPE Polyethylene
- Durable and strong plastic case for storing and transporting spare engines
- Crates fit both 360 and 410 engines
- Made in U.S.A.
$209.99More InfoRace Ramps RR-56 56 Inch Race RampsSKU-2366000x
Our 56 inch Race Ramps are perfect for the delicate jobs for your low profile or low clearance vehicle -- they lift your car up 8 inches off the ground at a 10.75 degree incline, giving you rock-solid stability for whether you're putting your car on display for a show, giving your baby a tune up or changing the oil. The smaller size and lower rise make these puppies extra portable, perfect for toting around to car shows or training sessions
- Made of a space age foam
- Supports 3000lbs per pair
- 8 inch lift height
- Includes handy straps for carrying and storage
- Pair weighs 26lbs
- 56" long, 11" tall and 12" wide
$32.99More InfoPerformance Tool W41030 Engine LevelerSKU-91089440x
Makes an engine change easy!
This heavy duty drop forged steel contructed 3/4 ton engine leveler is fully adjustable with threaded rod and three-position chain mount holes per end. Allows you to tilt engine as needed.
Leveler includes heat treated chains and hooks.
$999.99More InfoStandard Portable Test Engine StandSKU-91081115x
Wouldn't it be great if you could adjust the valves, carb and find oil leaks before you put that engine in your car? This heavy duty motor stand allows you to do just that. Made of thick .125" wall steel tubing, grade 8 fasteners and big locking casters.
Choose either the Deluxe stand that includes fuel tank, radiator, cooling fan and gauges, or buy the Standard model and supply the accessories yourself.
- Collapsible for easy storage
- Modular design accommodates individual needs
- Supports up to 1600 lbs.
- Powdercoated blue for a durable, attractive finish
Truck Freight Shipping Charges Apply - click here for details.
$24.99More InfoTrailer Quick JackSKU-91089801x
A fast, safe and easy way to change a flat. Simply ride the good tire onto the jack and change your flat, which is now off the ground. Features no-slip traction strips and a wide tire center area. 27" long, 7" wide and 4-1/2" high.
$199.99More InfoSprint & Midget Steel Chassis StandsSKU-94081105x
Move your midget, sprint car, or champ car with ease! These sturdy fabricated car stands won't buckle under high load capacity like our competitors.
Strong 3.5" rubber casters run over metal shavings, small bolts and other debris smoothly and effortlessly. Non-slip rubber mounts provide good grip for your car and the glossy black powder coated finish adds style. Overall dimensions are 30" wide and 15-1/2" tall. Sold in pairs.
$269.99More InfoGoJak 6200 Self-Loading Car DolliesSKU-8806200x
It's a real pain to move around a race or old car in your shop. They are hard to move by yourself, or you have to get out a floor jack, lift each end and put dollies under each wheel. These GoJaks simply slide in from the side and jack up each wheel using just your foot. This allows you to handle the job fast and by yourself.
- For tires up to 13" wide, 36" tall
- Lifts 1550 lbs. each
- Oversize casters for easier rolling
- Under frame clearance is increased an additional 2-1⁄2 inches over the 5000 Series
- Very useful when pulling cars up flatbed trucks.
We recommend the storage rack to keep your investment up off the floor and organized when not in use.
$29.99More InfoCrow Enterprizes 11645 Engine Lift SlingSKU-94011645x
Great for around the shop or in the race trailer for quick and easy use. Center lift ring holds up to 500 lbs. and the straps have a 1/2" hole. Flexible webbing will not damage critical parts.
This has a total length of 25". The sling is 21".
$279.99More InfoRace Ramps RR-XT 67 Inch Drive-On RampsSKU-2362000x
If you are like me, the years have added a little bulk to your middle. The problem is you can't seem to slide under a car to change oil or do maintenance any more. These drive-on ramps are made of a space age foam technology and will support up to 3000 lbs. per pair, but are light enough at 30 lbs. to hang on the wall. They are 67" long, 10" tall and 14" wide.
$59.99$63.99More InfoOuterwears EB-1000 Engine Storage BagSKU-56411000x
Cover your spare engines or protect a finished engine while it's waiting to be installed. Made from a water repellent black Denier nylon. Equipped with drawstring at bottom to secure cover to stand.
$89.99More InfoAuto Dolly M590059A Roll Around AttachementSKU-91081142x
- For 12" or 16" Auto Dolly (standard or heavy duty)
- Unimpeded access to the wheel well areas (with the tires/wheels removed)
- Move your vehicle in any direction
- Big advantage for auto restoration projects, painting and body work
- Fits 5 on 4-1/2", 4-3/4" and 5" bolt patterns
$49.99More InfoPerformance Tool W41036 Deluxe Engine LevelerSKU-91089445x
Makes an engine change easy and quick!
This heavy duty drop forged steel contructed 3/4 ton engine leveler is fully adjustable with threaded rod and three-position chain mount holes per end.
This leveler also features a crank handle for fast adjustments and a chain link for the hook. Allows you to tilt engine as needed.
Leveler includes heat treated chains and hooks.
From: $249.99More InfoSprint Car Tru-StandsSKU-91081105x
Our Sprint Car Tru-Stands are available in either economical zinc plated steel or lightweight aluminum. These stands support the frame and axles separately, allowing fast and easy axle changes. Allows you to get your car up in the air to work on and supports the font and rear axles to ease their replacement. Adjustable height from 17" to 34" and accepts frames up to 27" wide.
Heavy duty 4-1/2" wheels roll smoothly and have built-in brake for swivel and rolling.
910-81105 Instructions (PDF)
$1,079.99More InfoBert Transmission AJ1000 Aluminum Bumper JackSKU-7365000x
- Air operated @ min. 50 PSI
- Ideal for cars with tubular bumpers
- 36" maximum lift height
- Rated to 2500 lbs
$795.99More InfoBrunnhoelzl 3-Pump Aluminum Racing JackSKU-91082365x
The Brunnhoelzl 3 Pump Racing Jack can reach a maximum height of 17-1/8" while maintaining a low profile at 3-1/4". This aluminum jack is also crew friendly by weighing only 32 pounds and featuring a 40 inch long 1-piece handle.
- 3 pump version
- Weighs only 32 lbs.
- Light aluminum frame
- Minimum height is 3-1/4”, maximum height is 17-1/8”
- Includes 40” long 1-piece handle
- Available in Black
$38.99More InfoSmall Block Ford Engine Storage StandsSKU-91081102x
These Small Block Ford motor stands are light, compact, and priced so low anyone can afford them. You can even leave the tranny attached.
Add the caster wheel kit to make it mobile.
$12.99More InfoStandard Engine Lift PlateSKU-91089430x
Features 4 holes that allow for compensation for engine tilt. Fits the standard Holley 2 bbl. and 4 bbl. and Rochester bolt patterns.
$44.99More InfoMoroso 62080 Cylinder Head Work StandsSKU-54562080x
These stands get the head up off the bench where it's easier to work on. You just set the head on the tapered studs and go to work.
- Rugged fixture is a "must have" for the serious engine builder
- Work stand is designed for use with all popular cylinder heads and provides an inexpensive, safe and sure mount for all jobs from porting to cc-ing the chambers
- Disassembles for easy storage in tool box
- 2 supports per set
$99.99More InfoRacing Aluminum Jack StandsSKU-91081140x
These heavy duty aluminum jack stands are made of 3/16" material but still weigh less than 7 lbs. each. Big 15-1/2" x 10" foot print offers superior stability and won't sink into the dirt. A convenient 12" fixed height works great for all applicatons. 3000 lb. capacity.
$139.99More InfoRacing Jack Stands - Set of 4SKU-91081103x
Forget those teetering, cheap jacks stands. If you're not on cement, this is the only jack stand you should own.
These babies give you over 142 square inches of support, and won't sink into the ground like others. Each stand features a base that's 15" x 9-1/2", and raises your vehicle 12" high.
The base is .105" thick, the sides are also .105" and the top support is 2".
Large contact area and durable black finish. Sold in a set of four.
$34.99More InfoSmall Block Chevy Engine Storage StandSKU-91681200x
Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.
Fits 1958-Up Small Block Chevy 283-400 engines.
$54.99More InfoQuick Time Performance 10100 QTP LSx Engine Lift PlateSKU-91610100x
The days of scratching the paint in your engine bay are over. This polished stainless steel 1/4" thick lift plate allows you to safely and precisely install or remove your LSx engine by its valley cover bolts. It fits all Gen III and IV GM motors 1997 and newer. Includes a Grade 8 nut and bolt.
$39.99More InfoSmall Block Ford Engine Storage StandSKU-91081199x
Our handy motor stands allow installation of drives, pulleys and clutches.
- Fits 289-351W Small Block Ford engines
- Stand is painted Blue
$49.99More InfoBrunnhoelzel BRI-184 Aluminum Jack Dirt WingsSKU-91082366x
These aluminum dirt wings keep your Brunnhoelzel aluminum jack steady on soft or uneven ground. They come as a pair, complete with all necessary hardware. No more struggling with uneven surfaces while making timely adjustments to your race car.
- For Brunnhoelzel jack
- Helps keep your jack steady on soft or uneven ground
- Sold as a pair
- Hardware included
$139.99More InfoEngine Rotator HandleSKU-94081100x
If you have a Sprint car, this tool is a must. Simply bolt your splined center to the handle (a bent one will work,) slide the center on the axle, put your car in gear, and turn your engine over. Leaking down your engine, checking valve lash, and finding top dead center is now made easy.
The handle is black anodized 6061 T-6 aluminum with machined face and knurled grip. This product is top quality and fits most standard manufactures centers (Weld, Sanders, ect.)
$63.99More InfoHRP HRP6002 Sprint Car Engine StandSKU-91089228x
- 1” diameter plated tube
- Bolts to the back of block and off of the front motor plate
$36.99More InfoSpeedway Engine Lift HandlesSKU-91081220x
No cherry picker? No problem! Speedways engine lift handles screw into the front and back of your motor and allow for a smoother lifting process for those times when a cherry picker isn't available. These sure-grip handles are comfortable and fit your hands like a glove!
- 4-1/4" mounted length
- Set of 4
$109.99More Info1000 Lb. Wheel Dollies, Set/4SKU-91081107x
A set of these wheel dollies allow one person to move a car around in their garage. Each dolly is rated to support 1,000 lbs. 14" max width with 15" front to back between castors. Castor wheels are cast steel.