Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 3

Products

Jacks, Jack Stands and Hoists

Shop Jacks, Jack Stands, &Hoists At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

Featured Products
  • Goodyear 1-1/2 Ton Aluminum Racing Jack
    Goodyear 1-1/2 Ton Aluminum Racing Jack
    (Part #91082360)
    x
                This Goodyear aluminum racing jack lets you work  like the pros on the tracks. Lightweight versatiliy and extended handle  for rapid lifting.
    • Low profile 3-1/2"
    • Lightweight aluminum frame
  • 1000 Lb. Wheel Dollies, Set/4
    $109.99
    Product Rating: 4.00 Stars
    1000 Lb. Wheel Dollies, Set/4
    (Part #91081107)
    x
                

    A set of these wheel dollies allow one person to move a car around in their garage. Each dolly is rated to support 1,000 lbs. 14" max width with 15" front to back between castors. Castor wheels are cast steel.

  • Ranger Products BL-500 QuickJack 5000 Lb Car Jack Support System
    New
    Ranger Products BL-500 QuickJack 5000 Lb Car Jack Support System
    (Part #91075188)
    x
                

    Looking to replace those clumsy and unstable floor jacks? We have the perfect replacement! This 5,000 pound capacity Quick Jack is just what you are looking for. Durable and convenient, this Quick Jack provides a very safe and strong support system.

    Features:

    • 5,000-pound capacity
    • From stow to go in less than 60-seconds
    • Open-center design for clear undercar access
    • Remote pendant control features a 20-foot cord
    • Rugged safety lock bars with dual locking positions keep vehicles safely held in a raised and locked position
    • Quick-connect/disconnect hoses for fast and convenient set-up
    • Includes an eight-piece set of adjustable and stackable rubber lift blocks to support cars at precise locations for increased stability and safety
    • Convenient handles allow for easy positioning of the jack frames
    • Rugged welded tubular steel frames
    • Integrated rubber wheels for added mobility
    • Conveniently store out of the way when not in use
    • Provides quick wheels-free convenience for brake and tire service and clear undercarriage access of all types of vehicles
    • Low-profile jack frames fit under most race cars
    • Powerful hydraulic cylinders eliminate the need for screw mechanisms
    • Integrated power-assist canisters increase the lowering speed
    • Hydraulic cylinders feature integrated velocity-fuse safety valves
    • A convenient metal carrier with handle keeps the power unit protected and easily mobile
    • Power unit features a built-in flow divider for precisely equalized lifting
    • Detailed installation, maintenance and safety instructions accompany each QuickJack system
    • Durable powder coat finish

    Power Unit Info:

    • A 110V AC power unit comes standard
      • AC power unit: @2500 PSI = 11 AMPS / 1200 Watts / .15 GPM

    Specifications:

    • Weight capacity: 5,000-lbs. / 2268 kg
    • Individual frame weight: 65 lbs. / 29 kg
    • Platform lifting height (frame only): 18.5” / 470 mm
    • Platform lifting height (with rubber lift blocks): 22” / 559 mm
    • Minimum collapsed height: 3” / 76 mm
    • Rubber block position MIN: 35.5” / 902 mm
    • Rubber block position MAX: 50.5” / 1283 mm
    • Frame width: 11.25” / 286 mm
    • Frame length: 69” / 1753 mm
    • Lifting time: 15 -30 seconds
    • Packaged weight (jack system complete - less power unit): 135 lbs. / 61 kg
    • Packaged weight (power unit and power unit carrier): 19 lbs. / 9 kg
    • Shipping weight with pallet and packaging approximately: 230 lbs
    • Packaged dimensions (jack system frames only – pair): 71” x 12” x 6.5” / 1803 mm x 305 mm. x 165 mm
    • Packaged dimensions (power unit and power unit carrier): 9” x 9” x 18.5” / 229 mm. x 229 mm. x 470 mm

     

     

  • Race Ramps RR-XT 67 Inch Drive-On Ramps
    Race Ramps RR-XT 67 Inch Drive-On Ramps
    (Part #2362000)
    x
                

    If you are like me, the years have added a little bulk to your middle. The problem is you can't seem to slide under a car to change oil or do maintenance any more. These drive-on ramps are made of a space age foam technology and will support up to 3000 lbs. per pair, but are light enough at 30 lbs. to hang on the wall. They are 67" long, 10" tall and 14" wide.

    Rebate  Feb2 - March 31 2015 (PDF)  


     

  • Portable Engine Stand, 1500 LBS.
    Portable Engine Stand, 1500 LBS.
    (Part #91081002)
    x
                This portable motor stand is made of steel and have 360° engine  rotation. Assembles and disassembles easily. No welding required. 

    Heavy duty steel wheels. This 1,500 lb stand has four casters.
  • Small Block Chevy Engine Storage Stand
    Small Block Chevy Engine Storage Stand
    (Part #91681200)
    x
                

    Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.

    Note: Engine set up block is shown in photo for reference only and is not provided with the engine stand.

    Fits 1958-Up Small Block Chevy 283-400 engines.

  • Auto Dolly M998088 Folding Engine Stand
    New
    Auto Dolly M998088 Folding Engine Stand
    (Part #91081004)
    x
                

    This folding engine stand from Auto Dolly allows post-crankshaft installation operations much easier. This engine stand can hold your engine vertically at 45°, and horizontally to make engine repair jobs quick and easy. Made in the USA!

    • Heavy duty rolling casters
    • Folds up to save space
    • Made in the USA

    Specs:

    • Fold out radius: 32”
    • Fold up distance to top of engine stand plate: 40”
    • Folded down dimensions: 14” x 40” x 18”
    • 1,200 lb. weight capacity
    • 100 lbs. shipping weight 

    Fold n' Tilt Engine Stand (PDF)

  • Transmission Stand
    $24.99
    Product Rating: 4.50 Stars
    Transmission Stand
    (Part #91081201)
    x
                For storage or transporting, this 2-piece tranny stand design makes it easy. Fits Saginaw and others with short tail housing.
            

Filter

"Tools, Jacks, Jack Stands and Hoists" Page 1 of 3

Page 1 of 3

  • GoJak Dollie Storage Rack
    $89.99
    GoJak Dollie Storage Rack
    (Part #880456)
    x
                

    Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.

    Rack shown with four GoJaks®, which are not included.

  • Casters for Engine Storage Stand, Set/4
    Casters for Engine Storage Stand, Set/4
    (Part #91081139)
    x
                Casters are 3" x 1-1/4" inch wide making rolling  easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at  300lbs.
            
  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    (Part #2367000)
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

    Rebate  Feb2 - March 31 2015 (PDF) 

     

  • Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    Ernst Mfg 964 Yellow Jack Stand Covers - 4 Pack
    (Part #91000964)
    x
                Made of high-compression, rubberized material. Fits most two-ton to six-ton jack stands. Measures 1-1/4" wide x 4-1/4" long on the inside.
            
  • Transmission Stand
    $24.99
    Product Rating: 4.50 Stars
    Transmission Stand
    (Part #91081201)
    x
                For storage or transporting, this 2-piece tranny stand design makes it easy. Fits Saginaw and others with short tail housing.
            
  • Performance Tool W41032 Engine Lift Chain
    Performance Tool W41032 Engine Lift Chain
    (Part #91089435)
    x
                24 inches of heavy duty 1000 lb load chain. 
            
  • Sprint Car Engine Stand
    $249.99
    Sprint Car Engine Stand
    (Part #94081106)
    x
                This motor stand is perfect to store your engine during the offseason or use it for your spare motor. 2" casters allow you to easily roll where needed. Fits either standard or lightweight blocks. 
            
  • Auto Dolly M998035 Heavy Duty Dolly Set
    New
    Auto Dolly M998035 Heavy Duty Dolly Set
    (Part #91081148)
    x
                

    Now you can roll your vehicle around with ease. Just place each heavy duty dolly under each tire of the vehicle. The large bearing casters make it smooth and easy for anyone to maneuver their vehicle in any direction.

    • Move vehicle with ease 
    • Heavy duty casters
    • Made in the USA

    Specs and Features:

    • 2500 lb. weight capacity
    • Powder coat finish
    • Move the vehicle in any direction, even sideways
    • Casters won’t mark floors
    • Sold in sets of 2

    Heavy Duty Auto Dolly (PDF)

  • Gaerte Micro Sprint Motor Stand
    Gaerte Micro Sprint Motor Stand
    (Part #96012813)
    x
                

    Use these durable engine stands from Gaerte to test or store your micro sprint motors. They feature all steel construction with adjustable support rods and convenient roller wheels for easy transportation and movability.

    • Steel
    • For Micro sprint engines
  • DMI SRC-3000 Sprint Car Engine Rotator Tool
    DMI SRC-3000 Sprint Car Engine Rotator Tool
    (Part #94023000)
    x
                These Sprint engine tools from DMI feature quality anodized aluminum construction.
    • Use this tool to run engine over for leaking down motor or setting the valves
    • Splined insert ratchet allows motor you to stand on one side of the car and run all of the valves at once
  • Outerwears Speedway Engine Bag
    Outerwears Speedway Engine Bag
    (Part #564EB1000)
    x
                Cover your spare spare engines or protect a finished engine while it's waiting to be installed. Made from a water repellent Denier nylon. Equipped with drawstring at bottom to secure cover to stand.
            
  • Race Ramps RR-40 40 Inch Sport Ramps
    Race Ramps RR-40 40 Inch Sport Ramps
    (Part #2365000)
    x
                When  sports car enthusiasts told us they wanted a simple, sleek ramp  for them, we  listened. Our 40 inch Sport Ramp is built just for their  needs. If you want a  no-fuss but still solid ramp for your sports car,  this is for you. It  can handle tires up to 8 inches wide and raises your car up 7  inches --  basically, it's a sweet little ramp that gives you a lot of  access.
    • Made of a space age foam
    • Supports 3000lbs per pair
    • 8 inch lift height
    • Pair weighs 23lbs
    • 40" long, 11" tall and 14" wide

    Rebate  Feb2 - March 31 2015 (PDF) 


  • Auto Dolly M998072 Rolling Rack for Heavy Duty Wheel Dollies
    Auto Dolly M998072 Rolling Rack for Heavy Duty Wheel Dollies
    (Part #91081138)
    x
                

    An ingenius way to turn one Auto Dolly into a convenient storage cart for easily transporting the whole set in one trip. Works with all sizes of the Auto Dolly heavy duty car wheel dolly.

    • No assembly required
    • Built-in "tiller" for easy steering
    • Helps keep your shop organized
    • Powerder coat finish
  • LS1 Engine Stand
    $44.99
    Product Rating: 4.33 Stars
    LS1 Engine Stand
    (Part #91081137)
    x
                

    This motor stand is light, compact and priced so low anyone can afford them. You can even leave the tranny attached. The stand is made with 1" x 2" x 14 gauge tubing. The mounting plate is made with 1/4" steel. The stand has 9 -1/4" clearance w/o casters to fit the deep oil pans. Mounting bolts are included.

    Note: The engine storage stand will NOT clear the "batwings" of a C5 Corvette oil pan when it is bolted to an LS engine. 

    Add the optional caster wheel set to make it mobile.

  • Chevy/Ford SB Shipping/Storage Container, L40 x W27 x H31 In
    Chevy/Ford SB Shipping/Storage Container, L40 x W27 x H31 In
    (Part #9405108)
    x
                

    Keep those dents out of your trailer and keep the freight companies happy by putting your engine in a storage box like the professionals use.  These engine shipping crates are designed for shipping or storage of short or long block engines. They are suitable for fork lifts and are stackable to save space.

    This case works for shipping or storing new and spare engines. It's constructed of injection molded plastic. It is a two-piece container. The bottom case bolts directly to motor.

    • Fits small block Chevy/Ford complete engines with most accessories
    • 40" Long x 27" Wide x 31" High
    • Manufactured from tough LLDPE Polyethylene 
    • Durable and strong plastic case for storing and transporting spare engines
    • Crates fit both 360 and 410 engines
    • Made in U.S.A.
  • Race Ramps RR-56 56 Inch Race Ramps
    Race Ramps RR-56 56 Inch Race Ramps
    (Part #2366000)
    x
                Our  56 inch Race Ramps are perfect for the delicate jobs for your low  profile or  low clearance vehicle -- they lift your car up 8 inches off  the ground at a  10.75 degree incline, giving you rock-solid stability  for whether you're  putting your car on display for a show, giving your  baby a tune up or changing  the oil. The smaller size and lower rise  make these puppies extra portable,  perfect for toting around to car  shows or training sessions
    • Made of a space age foam
    • Supports 3000lbs per pair
    • 8 inch lift height
    • Includes handy straps for carrying and storage
    • Pair weighs 26lbs
    • 56" long, 11" tall and 12" wide

    Rebate  Feb2 - March 31 2015 (PDF) 


  • Performance Tool W41030 Engine Leveler
    Performance Tool W41030 Engine Leveler
    (Part #91089440)
    x
                

    Makes an engine change easy!

    This heavy duty drop forged steel contructed 3/4 ton engine leveler is fully adjustable with threaded rod and three-position chain mount holes per end. Allows you to tilt engine as needed.

    Leveler includes heat treated chains and hooks.

  • Trailer Quick Jack
    $24.99
    Product Rating: 4.67 Stars
    Trailer Quick Jack
    (Part #91089801)
    x
                A fast, safe and easy way to change a flat. Simply ride the good tire onto the jack and change your flat, which is now off the ground.  Features no-slip traction strips and a wide tire center area. 27" long, 7" wide and 4-1/2" high.
            
  • Sprint & Midget Steel Chassis Stands
    Sprint & Midget Steel Chassis Stands
    (Part #94081105)
    x
                Move your midget, sprint car, or champ car with ease! These sturdy fabricated car stands won't buckle under high load capacity like our competitors.

    Strong 3.5" rubber casters run over metal shavings, small bolts and other debris smoothly and effortlessly. Non-slip rubber mounts provide good grip for your car and the glossy black powder  coated finish adds style. Overall dimensions are 30" wide and 15-1/2" tall. Sold in pairs.
  • GoJak 6200 Self-Loading Car Dollies
    GoJak 6200 Self-Loading Car Dollies
    (Part #8806200)
    x
                

    It's a real pain to move around a race or old car in your shop. They are hard to move by yourself, or you have to get out a floor jack, lift each end and put dollies under each wheel. These GoJaks simply slide in from the side and jack up each wheel using just your foot. This allows you to handle the job fast and by yourself.

    • For tires up to 13" wide, 36" tall
    • Lifts 1550 lbs. each
    • Oversize casters for easier rolling
    • Under frame clearance is increased an additional 2-1⁄2 inches over the 5000 Series
    • Very useful when pulling cars up flatbed trucks.

    We recommend the storage rack to keep your investment up off the floor and organized when not in use.

     

Goto Previous PagePrevious Page
1 2 3