The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.
"Tools, Jacks, Jack Stands and Hoists" Page 1 of 2
$89.99More InfoGoJak Dollie Storage Rackx
Convenient storage cart handles up to four GoJaks® and fits all models. The cart loads and unloads in seconds and rolls easily to the job or storage area.
Rack shown with four GoJaks®, which are not included.
$44.99More InfoCasters for Engine Storage Stand, Set/4x
Casters are 3" x 1-1/4" inch wide making rolling easier. Includes (2) swivel casters and (2) non-swivel casters. Swivel casters have double row swivel racelay. Each caster rated at 300lbs.
FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.
FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.
Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.
FlatStoppers won't scratch or otherwise damage floors, and won't rust.
$13.99More InfoErnst Mfg 964 Yellow Jack Stand Covers - 4 Packx
Made of high-compression, rubberized material. Fits most two-ton to six-ton jack stands. Measures 1-1/4" wide x 4-1/4" long on the inside.
$24.99More InfoTransmission Standx
For storage or transporting, this 2-piece tranny stand design makes it easy. Fits Saginaw and others with short tail housing.
$6.99More InfoPerformance Tool W41032 Engine Lift Chainx
24 inches of heavy duty 1000 lb load chain.
$249.99More InfoSprint Car Engine Standx
This motor stand is perfect to store your engine during the offseason or use it for your spare motor. 2" casters allow you to easily roll where needed. Fits either standard or lightweight blocks.
$259.99$287.99More InfoDMI SRC-3000 Sprint Car Engine Rotator Toolx
These Sprint engine tools from DMI feature quality anodized aluminum construction.
- Use this tool to run engine over for leaking down motor or setting the valves
- Splined insert ratchet allows motor you to stand on one side of the car and run all of the valves at once
$54.99More InfoOuterwears Speedway Engine Bagx
Cover your spare spare engines or protect a finished engine while it's waiting to be installed. Made from a water repellent Denier nylon. Equipped with drawstring at bottom to secure cover to stand.
$139.99More Info40 Inch Sport Rampx
When sports car enthusiasts told us they wanted a simple, sleek ramp for them, we listened. Our 40 inch Sport Ramp is built just for their needs. If you want a no-fuss but still solid ramp for your sports car, this is for you. It can handle tires up to 8 inches wide and raises your car up 7 inches -- basically, it's a sweet little ramp that gives you a lot of access.
- Made of a space age foam
- Supports 3000lbs per pair
- 8 inch lift height
- Pair weighs 23lbs
- 40" long, 11" tall and 14" wide
$44.99More InfoLS1 Engine Standx
This motor stand is light, compact and priced so low anyone can afford them. You can even leave the tranny attached. The stand is made with 1" x 2" x 14 gauge tubing. The mounting plate is made with 1/4" steel. The stand has 9 -1/4" clearance w/o casters to fit the deep oil pans. Mounting bolts are included.
Note: The engine storage stand will NOT clear the "batwings" of a C5 Corvette oil pan when it is bolted to an LS engine.
Add the optional caster wheel set to make it mobile.
$218.99More InfoChevy/Ford Small Block Shipping/Storage Container, L40 x W27 x H31 Inchx
Keep those dents out of your trailer and keep the freight companies happy by putting your engine in a storage box like the professionals use. These engine shipping crates are designed for shipping or storage of short or long block engines. They are suitable for fork lifts and are stackable to save space.
This case works for shipping or storing new and spare engines. It's constructed of injection molded plastic. It is a two-piece container. The bottom case bolts directly to motor.
- Fits small block Chevy/Ford complete engines with most accessories
- 40" Long x 27" Wide x 31" High
- Manufactured from tough LLDPE Polyethylene
- Durable and strong plastic case for storing and transporting spare engines
- Crates fit both 360 and 410 engines
- Made in U.S.A.
$209.99More Info56 Inch Race Rampx
Our 56 inch Race Ramps are perfect for the delicate jobs for your low profile or low clearance vehicle -- they lift your car up 8 inches off the ground at a 10.75 degree incline, giving you rock-solid stability for whether you're putting your car on display for a show, giving your baby a tune up or changing the oil. The smaller size and lower rise make these puppies extra portable, perfect for toting around to car shows or training sessions
- Made of a space age foam
- Supports 3000lbs per pair
- 8 inch lift height
- Includes handy straps for carrying and storage
- Pair weighs 26lbs
- 56" long, 11" tall and 12" wide
$32.99More InfoPerformance Tool W41030 Engine Levelerx
Makes an engine change easy!
This heavy duty drop forged steel contructed 3/4 ton engine leveler is fully adjustable with threaded rod and three-position chain mount holes per end. Allows you to tilt engine as needed.
Leveler includes heat treated chains and hooks.
$24.99More InfoTrailer Quick Jackx
A fast, safe and easy way to change a flat. Simply ride the good tire onto the jack and change your flat, which is now off the ground. Features no-slip traction strips and a wide tire center area. 27" long, 7" wide and 4-1/2" high.
$199.99More InfoSprint & Midget Steel Chassis Standsx
Move your midget, sprint car, or champ car with ease! These sturdy fabricated car stands won't buckle under high load capacity like our competitors.
Strong 3.5" rubber casters run over metal shavings, small bolts and other debris smoothly and effortlessly. Non-slip rubber mounts provide good grip for your car and the glossy black powder coated finish adds style. Overall dimensions are 30" wide and 15-1/2" tall. Sold in pairs.
$269.99More InfoGoJak 6200 Self-Loading Car Dolliesx
It's a real pain to move around a race or old car in your shop. They are hard to move by yourself, or you have to get out a floor jack, lift each end and put dollies under each wheel. These GoJaks simply slide in from the side and jack up each wheel using just your foot. This allows you to handle the job fast and by yourself.
- For tires up to 13" wide, 36" tall
- Lifts 1550 lbs. each
- Oversize casters for easier rolling
- Under frame clearance is increased an additional 2-1⁄2 inches over the 5000 Series
- Very useful when pulling cars up flatbed trucks.
We recommend the storage rack to keep your investment up off the floor and organized when not in use.
$24.99More InfoCrow Enterprizes 11645 Engine Lift Slingx
Great for around the shop or in the race trailer for quick and easy use. Center lift ring holds up to 500 lbs. and the straps have a 1/2" hole. Flexible webbing will not damage critical parts.
This has a total length of 25". The sling is 21".
$59.99$63.99More InfoOuterwears EB-1000 Engine Storage Bagx
Cover your spare engines or protect a finished engine while it's waiting to be installed. Made from a water repellent black Denier nylon. Equipped with drawstring at bottom to secure cover to stand.
$89.99More InfoAuto Dolly M590059A Roll Around Attachementx
- For 12" or 16" Auto Dolly (standard or heavy duty)
- Unimpeded access to the wheel well areas (with the tires/wheels removed)
- Move your vehicle in any direction
- Big advantage for auto restoration projects, painting and body work
- Fits 5 on 4-1/2", 4-3/4" and 5" bolt patterns
$49.99More InfoPerformance Tool W41036 Deluxe Engine Levelerx
Makes an engine change easy and quick!
This heavy duty drop forged steel contructed 3/4 ton engine leveler is fully adjustable with threaded rod and three-position chain mount holes per end.
This leveler also features a crank handle for fast adjustments and a chain link for the hook. Allows you to tilt engine as needed.
Leveler includes heat treated chains and hooks.
From: $249.99More InfoSprint Car Tru-Standsx
Our Sprint Car Tru-Stands are available in either economical zinc plated steel or lightweight aluminum. These stands support the frame and axles separately, allowing fast and easy axle changes. Allows you to get your car up in the air to work on and supports the font and rear axles to ease their replacement. Adjustable height from 17" to 34" and accepts frames up to 27" wide.
Heavy duty 4-1/2" wheels roll smoothly and have built-in brake for swivel and rolling.
910-81105 Instructions (PDF)
$1,079.99More InfoBert Transmission AJ1000 Aluminum Bumper Jackx
- Air operated @ min. 50 PSI
- Ideal for cars with tubular bumpers
- 36" maximum lift height
- Rated to 2500 lbs
$795.99More InfoBrunnhoelzl 3-Pump Aluminum Racing Jackx
The Brunnhoelzl 3 Pump Racing Jack can reach a maximum height of 17-1/8" while maintaining a low profile at 3-1/4". This aluminum jack is also crew friendly by weighing only 32 pounds and featuring a 40 inch long 1-piece handle.
- 3 pump version
- Weighs only 32 lbs.
- Light aluminum frame
- Minimum height is 3-1/4”, maximum height is 17-1/8”
- Includes 40” long 1-piece handle
- Available in Black
$38.99More InfoSmall Block Ford Engine Storage Standsx
These Small Block Ford motor stands are light, compact, and priced so low anyone can afford them. You can even leave the tranny attached.
Add the caster wheel kit to make it mobile.
$12.99More InfoStandard Engine Lift Platex
Features 4 holes that allow for compensation for engine tilt. Fits the standard Holley 2 bbl. and 4 bbl. and Rochester bolt patterns.
$44.99More InfoMoroso 62080 Cylinder Head Work Standsx
These stands get the head up off the bench where it's easier to work on. You just set the head on the tapered studs and go to work.
- Rugged fixture is a "must have" for the serious engine builder
- Work stand is designed for use with all popular cylinder heads and provides an inexpensive, safe and sure mount for all jobs from porting to cc-ing the chambers
- Disassembles for easy storage in tool box
- 2 supports per set
$99.99More InfoRacing Aluminum Jack Standsx
These heavy duty aluminum jack stands are made of 3/16" material but still weigh less than 7 lbs. each. Big 15-1/2" x 10" foot print offers superior stability and won't sink into the dirt. A convenient 12" fixed height works great for all applicatons. 3000 lb. capacity.
$139.99More InfoRacing Jack Stands - Set of 4x
Forget those teetering, cheap jacks stands. If you're not on cement, this is the only jack stand you should own.
These babies give you over 142 square inches of support, and won't sink into the ground like others. Each stand features a base that's 15" x 9-1/2", and raises your vehicle 12" high.
The base is .105" thick, the sides are also .105" and the top support is 2".
Large contact area and durable black finish. Sold in a set of four.
$34.99More InfoSmall Block Chevy Engine Storage Standx
Our handy motor stands allow installation of drives, pulleys and clutches. All four legs fold up for easy storage when stand is not in use. Stand is painted red.
Fits 1958-Up Small Block Chevy 283-400 engines.
$54.99More InfoQuick Time Performance 10100 QTP LSx Engine Lift Platex
The days of scratching the paint in your engine bay are over. This polished stainless steel 1/4" thick lift plate allows you to safely and precisely install or remove your LSx engine by its valley cover bolts. It fits all Gen III and IV GM motors 1997 and newer. Includes a Grade 8 nut and bolt.
$39.99More InfoSmall Block Ford Engine Storage Standx
Our handy motor stands allow installation of drives, pulleys and clutches.
- Fits 289-351W Small Block Ford engines
- Stand is painted Blue
$49.99More InfoBrunnhoelzel BRI-184 Aluminum Jack Dirt Wingsx
These aluminum dirt wings keep your Brunnhoelzel aluminum jack steady on soft or uneven ground. They come as a pair, complete with all necessary hardware. No more struggling with uneven surfaces while making timely adjustments to your race car.
- For Brunnhoelzel jack
- Helps keep your jack steady on soft or uneven ground
- Sold as a pair
- Hardware included
$63.99More InfoHRP HRP6002 Sprint Car Engine Standx
- 1” diameter plated tube
- Bolts to the back of block and off of the front motor plate
$36.99More InfoSpeedway Engine Lift Handlesx
No cherry picker? No problem! Speedways engine lift handles screw into the front and back of your motor and allow for a smoother lifting process for those times when a cherry picker isn't available. These sure-grip handles are comfortable and fit your hands like a glove!
- 4-1/4" mounted length
- Set of 4
$109.99More Info1000 Lb. Wheel Dollies, Set/4x
A set of these wheel dollies allow one person to move a car around in their garage. Each dolly is rated to support 1,000 lbs. 14" max width with 15" front to back between castors. Castor wheels are cast steel.
$29.99More InfoDirt Wings for Billet Aluminum Floor Jackx
These dirt wings attach to our billet aluminum floor jack 91082356.
$19.99More InfoDeluxe Engine Lift Platex
Not all lift plates are created equal.
The Speedway Deluxe engine lift plate is designed to allow you complete adjustability without the need for clumsy hooks. Simply slide the chain through to the desired length and slide the link into the slot. Includes heart-shaped hole to allow use of a hook.
$79.99More InfoPortable Engine Stand, 1500 LBS.x
This portable motor stand is made of steel and have 360° engine rotation. Assembles and disassembles easily. No welding required.
Heavy duty steel wheels. This 1,500 lb stand has four casters.
$129.99More InfoGoodyear 1-1/2 Ton Aluminum Racing Jackx
This Goodyear aluminum racing jack lets you work like the pros on the tracks. Lightweight versatiliy and extended handle for rapid lifting.
- Low profile 3-1/2"
- Lightweight aluminum frame