Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Engine Service At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

"Tools, Engine Service" Page 1 of 3

  • Head Stud Remover and Tap Alignment
    Head Stud Remover and Tap Alignment
    x
                

    Allows removal of stock press-in studs and aligns the tap (7/16"-14) to simplify the installation of screw in rocker studs.

    For S/B Chevy V8 engines.

  • Small Block Chevy Deluxe Oil Pump Primer
    Small Block Chevy Deluxe Oil Pump Primer
    x
                

    Strong and Durable S/B Chevy oil pump primer. Features a special bushing to allow the lifters to be lubed.

  • Speedway Dual Gauge Leakdown Tester
    Speedway Dual Gauge Leakdown Tester
    x
                

    This dual gauge is ideal to check leak down and set barrel valves on fuel injection systems without running the engine. Detects ring seat failure, bent valves, cracked heads, and leaking gaskets. Works best with 100+ psi air source.

    Includes a 21" quick-disconnect hose to connect from the gauge to the spark plug hole. The threads on the the spark plug end are 14mm with an O-ring seal.

    913-81121 Instructions (PDF)

  • Precision Piston Ring Filer
    $39.99
    Product Rating: 4.56 Stars
    Precision Piston Ring Filer
    x
                

    Set ring end gap with this exclusive filer. Features carbide grinding wheel and cuts chrome plated stainless steel quickly and accurately. Can be mounted to any work bench.

  • Speedway Economy CC Checker
    $24.99
    Speedway Economy CC Checker
    x
                

    Inexpensive tool measures cylinder head combustion chamber size. With 100 CC burette, acrylic sealing plate.

    913-81105 Instructions (pdf)

  • Melling MCAT-62 Chevy 5/8 Inch Oil Pump Pick-up Installation Tool
    Melling MCAT-62 Chevy 5/8 Inch Oil Pump Pick-up Installation Tool
    x
                Trying to drive an oil pump pick-up tube into a Chevy oil pump can be a frustrating job. This nifty tool made by Melling makes the job easy!
            
  • Top Dead Center Indicator
    $5.99
    Product Rating: 3.33 Stars
    Top Dead Center Indicator
    x
                Positive stop to locate top dead center. A must for cam checking with heads on. For 14 mm thread. 
            
  • Heavy Duty Connecting Rod Separator Tool
    Heavy Duty Connecting Rod Separator Tool
    x
                If you have a set of new rods or have just had your rods reconditioned, you need one of these. It can be almost impossible to get the rod cap off a rod without a tool like this. Fits in your bench vise. 
            
  • Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8
    Aeroquip FBM3632 Push On Fitting Tool for AN4, AN6, AN8
    x
                

    It's a pain to push that blue hose onto a fitting! With this tool you don't need a vise or any other tools. Simply lube the inside of the hose, clamp the hose and give the lever a pull!

    For AN 4, 6, 8 straight push-on fittings only.

  • Valve Lash Rocker Adjusting Wrench, 5/8 Inch w/ 3/16 and 7/32 In. T-Wrenches
    Valve Lash Rocker Adjusting Wrench, 5/8 Inch w/ 3/16 and 7/32 In. T-Wrenches
    x
                

    These valve lash adjusting wrenches make adjustment very easy, cutting the adjusting time in half. Simply position the adjusting handle wrench over the rocker arm lockdown, and drop the appropriate T-handle down through the hole in the wrench--with one hand doing the job of two.

    Two part steel tool makes it easy to accurately adjust your rockers.  Each tool comes with two T-handle wrenches.

    Valve Lash Rocker Adjusting Wrench, 5/8 Inch w/ 3/16 and 7/32 In. T-Wrenches

  • Speedway Valve Spring Height Checker, Short 1.600 Inch-2.100 Inch
    Speedway Valve Spring Height Checker, Short 1.600 Inch-2.100 Inch
    x
                Precise measuring device for checking  the installed height of valve springs. Sets up just like a valve spring and reads like a simple micrometer. Far more accurate than snap gauge and dial calipers. Comes in two different height ranges. Base has 1.230 O.D.
            
  • Chevy Camshaft Install Tool
    $24.99
    Chevy Camshaft Install Tool
    x
                It's not too bad putting a Chevy cam in about 3/4 of the way. That's when you get shaky and start nicking the cam bearings. This tool bolts on the end of the cam and gives you the control to do the job right. Works great for taking the cam out too. This product is for non-roller camshafts.
            
  • Porting Kit
    $29.99
    Product Rating: 4.50 Stars
    Porting Kit
    x
                

    35-piece, complete kit includes: Grind-O-Flex abrasive flap wheel, grind polishing rolls (spiral and straight) for reaching into corners, hard-pointed stone and butterfly abrasive flaps.

    This kit uses 1/4" arbor's for all items included in the kit.

  • Offenhauser Flathead Ford Pressure Tester Kit
    Offenhauser Flathead Ford Pressure Tester Kit
    x
                

    If you have built a Flathead Ford, you know the odds of the block being cracked are pretty high. Plus the cost of cleaning and magnafluxing keeps going up. This kit allows you to pressure test one cylinder bank at a time to detect cracks or holes in your own garage. Includes regulator head plate, water pump plates and hardware. For 24 stud Flathead Fords only.

    Flathead Block Pressure Testing Instructions 

  • Performance Tool W87020 Power Steering Pump Pulley Remover
    Performance Tool W87020 Power Steering Pump Pulley Remover
    x
                Removes power steering and alternator pulleys on selected applications of GM, Ford and Chrysler with hub sizes of 1-1/8", 1-1/4", 1-5/16" or 1-3/8". 
            
  • Cam Bearing Driver
    $25.99
    Product Rating: 4.43 Stars
    Cam Bearing Driver
    x
                Remove and replace your S/B Chevy and 90° V6 cam bearings without damage to the bearings. 

    Note: Always remove cam bearings when boiling or cleaning block.

    913-81102 Instructions (pdf)

  • Cam and Lifter Organizer Box
    $19.99
    Product Rating: 4.33 Stars
    Cam and Lifter Organizer Box
    x
                Most of us would love an easy way to store a cam and lifters. This storage box keeps your lifters in order and the snap on lid keeps everything clean. Hi-impact plastic. 23-1/2" x 2-1/8" deep. 
            
  • Speedway Cubic Inch Tester
    $1,099.99
    Speedway Cubic Inch Tester
    x
                

    Use to determine correct cubic inch when restrictions apply. Accuracy to 1/2 of 1%.  Measures to 672 cubic inches. Includes glass tube, thermometer, plug adapter, instructions and accessories in a hardwood box.

    550-3200 Instructions (pdf)

  • LS PCM Mount Plate
    $39.99
    LS PCM Mount Plate
    x
                Mounts your stock computer safely and stylishly.  For 1999-2007 truck PCM.
            
  • Speedway Adjustable Ring Compressor
    Speedway Adjustable Ring Compressor
    x
                

    Tapered inner face. Hard anodized billet aluminum.

    Made extra deep with stainless steel adjusting straps for years of dependable service.

    Available in three sizes: 4.000-4.090 bore, 4.125-4.215 bore and 4.250-4.375 bore.

    Ring Style Chart (GIF)

  • Camshaft Dial Indicator
    $69.99
    Camshaft Dial Indicator
    x
                This style of dial indicator fits in either .842" GM or .875" Ford lifter bores. It is the easy to read cam specs when degreeing cams and reads in .001" increments. 1" of travel.  
            
  • Piston Ring Installation Tool
    Piston Ring Installation Tool
    x
                Installs and removes piston rings 3/64" through 1/4".  
            
  • Engine Cleaning Brush Kit
    $24.99
    Product Rating: 5.00 Stars
    Engine Cleaning Brush Kit
    x
                Kit includes twelve brushes in sizes from 1/4" to 5" diameter.
            
  • Offenhauser Valve Guide Removal Tool
    Offenhauser Valve Guide Removal Tool
    x
                Works much like a crowbar to pry the valve guide down against the valve spring - thereby gaining access to the valve guide retainer. Works on ALL flathead Ford engines - 4, 6, and 8 cylinders. Model T, A, B and V8 1932-53.
            
  • Performance Tool W89716 Serpentine Belt Tool Kit
    Performance Tool W89716 Serpentine Belt Tool Kit
    x
                This tool kit allows you to replace the serpentine fan belt on many Ford, GM and Mopar vehicles. Also includes GM fan clutch wrench sockets and wrenches.  
            
  • Small Block Chevy Engine Seal Up Kit
    Small Block Chevy Engine Seal Up Kit
    x
                Engine seal up kit features aluminum plates designed to block off all openings in small block Chevy long block. Great for engine storage.
            
  • Pushrod Length Checker, 7.5-8.7 Inches
    Pushrod Length Checker, 7.5-8.7 Inches
    x
                

    You always need to find the correct length for your push rods when you build an engine. Having the wrong length changes the geometry of the valve train and decreases horsepower while increasing wear.

    • Adjustable to fit several engines
    • Enables you to arrive at correct pushrod length and correct valve train geometry
    • Minimum length is 7.5" and maximum length is 8.7"
    • Includes two per package (check both intake and exhaust)
    • 5/16" diameter
  • 32 Inch Long Straight Edge
    $79.99
    32 Inch Long Straight Edge
    x
                

    Used to check for straightness on blocks and heads. 32" long and accurate to .001".

  • Connecting Rod Balancing Stand
    $189.99
    Connecting Rod Balancing Stand
    x
                

    Rod weight fixture for determining bob weights and matching rod end weights. With bearing mounted arms. All aluminum construction. 

    Scale NOT included (use with scale at right).

  • Harmonic Balancer Pull and Installer
    Harmonic Balancer Pull and Installer
    x
                

    Installs and removes engine balancer quickly and easily without causing damage. Features a roller thrust bearing which allows the drive nut to rotate freely so the balancer is pressed on or pulled off smoothly and evenly.

    Bolts of various lengths in sizes of 1/4, 5/16, 3/8, and 8mm are included along with adapters to 7/16, 1/2, 9/16, 5/8, 3/4 and 12, 14, and 16mm.  Kit works on most domestic vehicles and includes the 78 and up metric chassis cars.

    Insert adapters are included to fit most popular engines including Chevrolet, Ford, Mopar, KB Hemi, Pontiac, Oldsmobile and Buick. 

  • JAZ Products 730-009-01 Economy Engine Blockoff Kit, Small Block Chevy
    JAZ Products 730-009-01 Economy Engine Blockoff Kit, Small Block Chevy
    x
                This economy plastic kit covers the exhaust ports and distributor hole. For Small Block Chevy (SBC) heads.
            
  • Piston Ring Compressor
    $19.99
    Product Rating: 5.00 Stars
    Piston Ring Compressor
    x
                

    The tapered inner diameter of this ring compressor tool compresses piston rings to proper bore size, eliminating chance of unseen ring breakage. Made from anodized aluminum. For 4.030" or 4.060" bore.

    Ring Style Chart

  • Piston Ring Squaring Tool, 4.000 to 4.230 Bores
    Piston Ring Squaring Tool, 4.000 to 4.230 Bores
    x
                

    For checking piston ring end gap. One tool covers 4.000" thru 4.230".  Anodized aluminum. Designed to fit inside head studs.

    Ring Style Chart

  • VALVE SPRING GAUGE
    $54.99
    Product Rating: 5.00 Stars
    VALVE SPRING GAUGE
    x
                

    Measures tension of valve springs for engine builders. Use in a vise or under the quill of a drill press.

    913-81103 Instructions (pdf)

  • Valve Lash Rocker Adjusting Wrench, 9/16 Inch w/ 3/16 and 7/32 In. T-Wrenches
    Valve Lash Rocker Adjusting Wrench, 9/16 Inch w/ 3/16 and 7/32 In. T-Wrenches
    x
                

    These valve lash adjusting wrenches make adjustment very easy, cutting the adjusting time in half. Simply position the adjusting handle wrench over the rocker arm lockdown, and drop the appropriate T-handle down through the hole in the wrench--with one hand doing the job of two.

    Two part steel tool makes it easy to accurately adjust your rockers.  Each tool comes with two T-handle wrenches.

    Valve Lash Rocker Adjusting Wrench, 9/16 Inch w/ 3/16 and 7/32 Inch T-Wrenches

  • Pushrod Length Checker, 8.5-9.8 Inches
    Pushrod Length Checker, 8.5-9.8 Inches
    x
                

    You always need to find the correct length for your push rods when you build an engine. Having the wrong length changes the geometry of the valve train and decreases horsepower while increasing wear.

    • Adjustable to fit several engines
    • Enables you to arrive at correct pushrod length and correct valve train geometry
    • Minimum length is 8.5" and maximum length is 9.8"
    • Includes two per package (check both intake and exhaust)
    • 5/16" diameter
  • Speedway Chevy V8 Oil Pump Primer
    Speedway Chevy V8 Oil Pump Primer
    x
                

    Use with an electric drill to prime engine before starting. Remove the distributor and insert this primer to engage the end of the oil pump drive.

  • Valve Spring Tester
    $195.99
    Valve Spring Tester
    x
                Black anodized aluminum. Most convenient Valve Spring Tester on the market. Set spring height once and test as many springs as you want, with little effort. Handles up to 600 lb. springs.
            
  • Aluminum Freeze Plugs with Return
    Aluminum Freeze Plugs with Return
    x
                These are a set of four aluminum plugs that would replace freeze plugs on a S/B Chevy.  They have 1/2" NPT female pipe threads in the center of each one. 
            
  • Dorman 550-017 Concave Expansion Freeze Plugs, 1.250 Inch Steel
    Dorman 550-017 Concave Expansion Freeze Plugs, 1.250 Inch Steel
    x
                Complete freeze plug kits available in steel for GM OE#: 1489745.                               
    • 1.250" steel Concave Expansion Plugs
    • Box of 10
    • Direct cross to GM OE#: 1489745
Goto Previous PagePrevious Page
1 2 3