Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Chassis and Suspension At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

"Tools, Chassis and Suspension" Page 1 of 4

  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    x
                

     No need for old individual set up blocks. These adjustable blocks will do the trick of many other sets in one. For any type of Sprint Car, Midget or Micro.

    • Adjustable in 1/8" increments. 
    • Magnetic. 
  • Proform 67649 Billet Aluminum Scale Ramps
    Proform 67649 Billet Aluminum Scale Ramps
    x
                
    • Black anodized billet aluminum scale ramps
    • Peak height is 2 3/8”
    • Set of 4
  • Speedway Forged Aluminum Coilover Wrench
    Speedway Forged Aluminum Coilover Wrench
    x
                

    This forged aluminum spanner wrench tool makes coil-over adjustments easier than ever.

  • DECO Frame Height Gauge, 3 Inch to 4-3/8 Inch
    DECO Frame Height Gauge, 3 Inch to 4-3/8 Inch
    x
                Quick and accurate way to measure frame height. Covers frame heights from  3" to 4-3/8" in 1/8" increments. Sturdy steel construction. No flimsy  plastic here!
            
  • P-Ayr Products 3051 Ford 4.6L Short Set-Up Block Only
    P-Ayr Products 3051 Ford 4.6L Short Set-Up Block Only
    x
                

    These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

    Just a few of the features include:

    • Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
    • Accepts original front and rear main caps
    • Accepts original oil filter
    • Easily painted
  • Moose Blocks 5140 Pro 3 Inch - 6 Inch Adjustable Set Up Blocks
    Moose Blocks 5140 Pro 3 Inch - 6 Inch Adjustable Set Up Blocks
    x
                

     No need for old individual set up blocks. These adjustable blocks will do the trick of many other sets in one. For any type of Sprint Car, Midget or Micro.

    • Adjustable in 1/8" increments. 
    • Magnetic. 
  • Intercomp SW787 Wireless Scale System
    $1,439.99
    $1,449.99
    Product Rating: 5.00 Stars
    Intercomp SW787 Wireless Scale System
    x
                

    Displays Setups to One Hundredth of a Percent! Intercomp’s PC Wireless Scale Systems combine our ultra accurate Billet Scale Pads with Intercomp’s tested & proven advanced RFX™ Wireless Weighing Technology.

    Software compatible with: Windows® 2000, Windows® XP, Vista™ & Windows® 7.

    • Laptop not included, shown for reference only
    • 15" X 15" X 2.5" Wireless billet pads
    • RaceWeigh software for PC
    • AA alkaline batteries for scale pads
    • 1,500 Pad capacity, 6,000 lb system capacity
    • 2 year warranty
    • Includes FREE scale pad box (a $249.99 value)  
    • Fully Integrated RFX™ Wireless Technology      
    • RS232 Output to Printer
    • Store & Recall Chassis Setups  
    • 400hr Average Battery Life in Pads

    NOTE: Laptop NOT included.

  • T Bar Mockup Kit for Mustang II Front Suspension
    T Bar Mockup Kit for Mustang II Front Suspension
    x
                These adjustable mockup kits are great for determining the desired ride height for Mustang II crossmember and front end assemblies.  They are easy to use and will give you the exact measurements you will need for final assembly.
    • Use to determine ride height with MII installations
    • Adjustable up to 3"
    • Make you next mockup easy and exact
  • Intercomp 100059 Digital Coil Spring Tester
    Intercomp 100059 Digital Coil Spring Tester
    x
                This Intercomp digital coil spring tester will read from 0-5000 lbs. which means one spring tester is all you need.   

    The digital pressure gauge reads in one lb. increments and the digital travel scale reads to 1/1000th. Will test up to 6" diameter springs, 18" long.

  • Longacre 72702 Computerscales WIRELESS AccuSet II
    Longacre 72702 Computerscales WIRELESS AccuSet II
    x
                
    Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
    • Accuset II control box with ZigBee wireless receiver
    • Includes Free deluxe scale pad box
    • 4 wireless pads
    • No wires to trip over, no fragile modules outside the pad
    • 4 line display shows all weights and partial %
    • LMF Satin finished pads with single load cells
    • CNC machined 15" low profile scale pads with handles and recessed connectors
    • 1/10% accuracy and 1500 lbs per pad capacity
    • Two-year limited warranty
  • AFCO 20134-7 Big Body Steel, 19, 23, 24, 25 Series, 7 Inch Sleeve
    AFCO 20134-7 Big Body Steel, 19, 23, 24, 25 Series, 7 Inch Sleeve
    x
                AFCO Coil Over Hardware for Big Body Steel (5 Inch OD) 19, 23, 24, & 25 Series Shocks
            
  • Howe Racing Enterprises 2154 Ball Joint Spreader Tool
    Howe Racing Enterprises 2154 Ball Joint Spreader Tool
    x
                Never ruin another ball joint by beating on it with a hammer. This handy tool is placed between the upper and lower ball joint, then turned to push the ball joint from the spindle. Compressed height 4-1/8", extended height 6-1/4".
            
  • Speedway Standard Set-Up Blocks, 1-3/4 - 4 Inch
    Speedway Standard Set-Up Blocks, 1-3/4 - 4 Inch
    x
                The adjustable set-up blocks the Pros use! Adjustable in 1/4" increments. Magnetic.
            
  • Intercomp SW650 Quick Weigh Wireless Scales
    Intercomp SW650 Quick Weigh Wireless Scales
    x
                

    The Intercomp SW650 Chassis Scale is loaded with features and will display setups to one hundredth of a percent.

    • Fully Integrated RFX Wireless Weighing Technology
    • Encryption Ensures Secure Wireless Communication
    • USB & RS232 Output
    • Certified to 0.1% Accuracy
    • Stores 100 Chassis Setups
    • Baseline Setup Recall
    • Center of Gravity Calculation
    • User Selectable Display Modes
    • Target Tune Feature
    • Giant 0.5" Display Characters
    • Backlit for Low-Lighting Conditions
    • View Any Combination of Scale Pad Weight & Percentage

    Includes a FREE scale storage box! (part # 910-82100, included with the purchase of this scale system)

  • Proform Wireless Scales and Ramps
    $1,214.99
    Proform Wireless Scales and Ramps
    x
                

    Proform's 20 years of excellence in precision scale manufacturing brings you the convenience of wireless technology at an affordable price.

    • Weight and percentage for each wheel, and total vehicle weight (up to 7,000 lbs)
    • Lightweight, die-cast aluminum pads are 15" x 15" with a 1,750 lb. capacity
    • Four stud mounted self-stabilizing feet
    • Accurate to 1/10 of 1%
    • Oversized, easy to read backlit display
    • Durable carrying case with wheels
    • Batteries included

    Instructions (PDF)

    Proform $50 Rebate (PDF) 

     

  • Intercomp 100675 Digital Shock Pressure Gauge
    Intercomp 100675 Digital Shock Pressure Gauge
    x
                If you are serious about shock tuning and rebuilding, you really need one of these gauges from Intercomp. Digital gauge reads to 300 psi in 1/2 lb. increments and allows you to fill and bleed accurately every time. Extremely accurate compared to a standard dial gauge.
            
  • Afco Pressure Tube Installer
    $39.99
    $40.99
    Afco Pressure Tube Installer
    x
                Afco shock rebuild tools.
            
  • P-Ayr Products 3126 Ardun Set-Up Head and Valve Cover
    P-Ayr Products 3126 Ardun Set-Up Head and Valve Cover
    x
                Why spend the time and cost of cleaning up a 100+lb, back breaking cast  iron block, when you can have one of these 14lb. wonders?  And you  won't believe all the versions and variations that are available.

    This HOT product made of Hi-Tech closed cell polyurethane, is molded directly from original castings.

    Just a few of the features include:

    • Threaded steel inserts in each of the bolt locations (including spark plugs)
    • Includes 2 ea cylinder heads and valve covers
    • Please note that the block is not included and is shown for reference only

     

  • Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    x
                These centering tools allow you to install a rear  end in a  chassis without being hooked up to a motor plate.  This is  helpful when  setting up an extra chassis before heading to the track.  This tool is specifically made for all types of micro chassis! 
    • Round hole is for the rear axle
    • 1 3/4" notch is for the front axle
    • Small hole is for the round rods
    Rear squaring:
    1. Set left and right torsion arm lengths with fixture
    2. Hook torsion arms to torsion bars without stops
    3. Hook torsion arms to bearing carriers
    4. Adjust radius rods to proper lengths and hook to bearing carriers
    5. Now unhook torsion arms
    6. With a protractor rotate bearing carriers 57 degrees
    7. Re-attach torsion arms (arms may need to be lengthened or shortened)
  • Tru-Square SPNT3001 Alignment Tool, Sprint
    Tru-Square SPNT3001 Alignment Tool, Sprint
    x
                
    • Quick attachment system for rear end squaring
    • All aluminum construction
    • Hardware is included
    Sprint Model
    • Fits 3" axle
    • Works on all chassis types
    Instructions (PDF)
  • Replacement Gauges for DECO Hydraulic Coil Spring Raters
    Replacement Gauges for DECO Hydraulic Coil Spring Raters
    x
                

    If this gauge is being used as a replacement for the DECO hydraulic spring rater, it is strongly suggested that customers return the gauge/head unit of the spring rater to allow us to install the new gauge for them. It is very difficult to install the new gauge and have the rater operate accurately. As we build this unit in house, our shop has the ability to install the gauge correctly and ensure that the rater operates accurately.

    Please call 800.979.0122 and ask to speak with a Race tech for further assistance.

  • Proform 67651 Wireless Scales
    $994.99
    Proform 67651 Wireless Scales
    x
                

    Proform's 20 years of excellence in precision scale manufacturing brings you the convenience of wireless technology at an affordable price.

    • Weight and percentage for each wheel, and total vehicle weight (up to 7,000 lbs)
    • Lightweight, die-cast aluminum pads are 15" x 15" with a 1,750 lb. capacity
    • Four stud mounted self-stabilizing feet
    • Accurate to 1/10 of 1%
    • Oversized, easy to read backlit display
    • Durable carrying case with wheels
    • Batteries included

    Instructions (PDF)

     

  • Willys Carbs WCD BC 12 Birdcage Indexing Tool, 1/2 Inch
    Willys Carbs WCD BC 12 Birdcage Indexing Tool, 1/2 Inch
    x
                
    • Birdcage indexing tool greatly simplifies this tedious process
    • Slip over birdcage bolts and attach angle finder
    • Gives an exact angle of the birdcage
    • It’s an invaluable tool for both racers and chassis builders
    • Angle finder sold separate
    • Choose 1/2", 5/8", or 3/4" based on birdcage bolt size
  • Swindell Series Sprint Car Torsion Bushing Tool
    Swindell Series Sprint Car Torsion Bushing Tool
    x
                

    Use this simple tool to easily and safely drive bushing into the torsion bar tube. This tool helps to prevent bending or breaking of the bushing flange. This tool is made in the USA and is a must for any tool box. Add the Swindell Series bushings (910-37117) for the perfect combination.

    • Made in the USA
    • Helps to safely install torsion tube bushings
    • Prevents bending or breaking of the bushing flange
    Sammy says, "I've been using a tool like this for years to easily install bushings without damage. This is a simple yet effective solution to safely installing bushings without damaging them." 

     

  • P-Ayr Products 2046 GM LS1 Set-Up Long Block
    P-Ayr Products 2046 GM LS1 Set-Up Long Block
    x
                

    These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

    Just a few of the features include:

    • Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
    • Accepts original front and rear main caps
    • Accepts original oil filter
    • Easily painted
  • P-Ayr Products 3142 Ford Flathead V8 60 Set-Up Heads
    P-Ayr Products 3142 Ford Flathead V8 60 Set-Up Heads
    x
                Why spend the time and cost of cleaning up a 100+lb, back breaking cast  iron block, when you can have one of these 14lb. wonders?  And you  won't believe all the versions and variations that are available.

    This HOT product made of Hi-Tech closed cell polyurethane, is molded directly from original castings.

    Just a few of the features include:

    • Threaded steel inserts in each of the bolt locations (including spark plugs)
    • Accepts original front and rear main caps
    • Accepts original oil filter.

    You can put one of these blocks on an engine stand or in a car and hang all the accessories in place without the weight of a cast iron block. It can also be easily painted.

  • Speedway Shock Wrench, AFCO Small Body
    $59.99
    $99.99
    Speedway Shock Wrench, AFCO Small Body
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Ball Joint Pickle Fork
    $8.99
    Product Rating: 4.00 Stars
    Ball Joint Pickle Fork
    x
                Break loose ball joints. Also known as pickle forks. Opening size is 15/16" for ball joint. 
            
  • DECO Frame Height Gauge, 4-1/4 Inch to 5-5/8 Inch
    DECO Frame Height Gauge, 4-1/4 Inch to 5-5/8 Inch
    x
                Quick and accurate way to measure frame height. Covers frame heights from 4-1/4" to 5-5/8"  in 1/8" increments. Stury steel construction. No flimsy  plastic here!
            
  • Intercomp SW500 E-Z Weigh Scales
    $1,039.99
    Product Rating: 5.00 Stars
    Intercomp SW500 E-Z Weigh Scales
    x
                

    Free Scale Box with Purchase! A $250 Value!

    • Displays Setups to One-Hundredth of a Percent!
    • Stores 100 Chassis Setups
    • Baseline Setup Recall
    • User Selectable Display Modes
    • View Any Combination of Scale Pad Weight & Percentage
    • Center of Gravity Calculation
    • Target Tune Feature
    • Certified to 0.1% Accuracy 
    • Standard 9-volt Battery Operation
    • RS232 Output
    • Giant 0.5" Display Characters
    • 1,500 lb (700 kg) Pad Capacity
    • 6,000 lb (2,800 kg) System Capacity
    System Includes:
    • 15"x15"x2.5" (381x381x64mm) Billet Scale Pads
    • 9-Volt Battery
    • 2-Year Warranty
    • Case for electronic box

     

     

     

  • Coil-Over Shock Mock-up Tool
    $58.99
    Product Rating: 5.00 Stars
    Coil-Over Shock Mock-up Tool
    x
                
    • Allows simulation of vehicle ride height for fabrication purposes
    • Include 5/8" rod ends, jam nuts, quick pin, and reducer for rod ends from 5/8" to 1/2"

    Builders Tip:  If you cut a short piece of roll bar padding shown below and install it around the coil over mock up assembly, the o/d of the roll bar padding will replicate the o/d of the coil over spring to be used.  This will allow the builder to visualize and consider where and how it needs to be mounted for clearances as if the coil over springs were in place.

  • DECO Bump Steer Gauge
    $169.99
    DECO Bump Steer Gauge
    x
                An exclusive design, our Bump Steer Gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as the front suspension moves up and down over bumps. 

    Quality features include precision ground steel plate; plate level; bottle jack with adjustable height and location; adjustable height gauges.

    Slotted mounting holes on plate allow use on 4 1/2" -5" BC without removing rotors. Also works with wide 5 hubs.

    910-82700 Instructions (pdf)

  • Sprint Car Rear End Squaring Tool
    Sprint Car Rear End Squaring Tool
    x
                The first and only rearend squaring tool of its kind! The DEADNUTS squaring tool is a patent pending tool, developed to make squaring your rear faster, more accurate and eliminate the confusion. Sprint kit works with 37" - 40" engine set backs.
            
  • DECO Laser Only for Scale Level
    DECO Laser Only for Scale Level
    x
                Never wonder if your scales are level again! For use with DECO laser scale leveling kit 300-9000.
            
  • Intercomp 100005 Digital Caster/Camber Gauge
    Intercomp 100005 Digital Caster/Camber Gauge
    x
                

    This is just the ticket for those of you running extreme front end settings! Will read up to 20 degrees of caster and camber. Reads to the 1/10° allowing you to be 10 times more accurate on your reading.  Includes a storage case and magnetic adapter. Includes standard 9 volt battery.

    Caster Angle Illustration

  • Speedway Shock Wrench, QA1 Small Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Small Body
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • DECO Frame Height Gauge Tool, Set/3
    DECO Frame Height Gauge Tool, Set/3
    x
                Quick and accurate way to measure frame height. 3-piece kit covers from  3" to 7" in 1/8" increments. Stury steel construction. No flimsy  plastic here!
            
  • Tru-Square Mini Sprint Rearend Alignment Tool, 2 Spacers, 2 Inch Axle
    Tru-Square Mini Sprint Rearend Alignment Tool, 2 Spacers, 2 Inch Axle
    x
                There are three (3) different Tru-Square tools for Mini/Micro Sprints depending on your axle. Here are directions to find out which tool you need:

    Set your rear axle on your setup blocks of choice. Be sure your spacers are on and your rear axle nuts are tight so the birdcages are not loose.

    The Tru-Square tool clamps to the axle directly above the setup blocks, therefore the tool that is needed is determined by the overall diameter of the axle or axle spacer (if applicable) at this location. Measure the diameter of your rear axle or the diameter of the spacer (if there is a spacer on the axle) directly above the set up blocks. Your measurements should be: 

    • 2" (on both sides) 
    • 2.5" (on both sides) 
    • 2" on one side and 2.5" on the other

    This fits long spline axles which have axle/wheel spacers covering the axle at the point of tool contact on both sides of the axle.

    • Quick attachment system for rear end squaring
    • All aluminum construction
    • Hardware is included

    Instructions (PDF)

Goto Previous PagePrevious Page
1 2 3 4