Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Chassis and Suspension At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

"Tools, Chassis and Suspension" Page 1 of 4

  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.00 Stars
    Longacre Accuset II Scale Kit
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • Intercomp 100675 Digital Shock Pressure Gauge
    Intercomp 100675 Digital Shock Pressure Gauge
    x
                If you are serious about shock tuning and rebuilding, you really need one of these gauges from Intercomp. Digital gauge reads to 300 psi in 1/2 lb. increments and allows you to fill and bleed accurately every time. Extremely accurate compared to a standard dial gauge.
            
  • Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    Stallard 999-005 Rearend Alignment Tool for Micro Sprint Racing
    x
                These centering tools allow you to install a rear  end in a  chassis without being hooked up to a motor plate.  This is  helpful when  setting up an extra chassis before heading to the track.  This tool is specifically made for all types of micro chassis! 
    • Round hole is for the rear axle
    • 1 3/4" notch is for the front axle
    • Small hole is for the round rods
    Rear squaring:
    1. Set left and right torsion arm lengths with fixture
    2. Hook torsion arms to torsion bars without stops
    3. Hook torsion arms to bearing carriers
    4. Adjust radius rods to proper lengths and hook to bearing carriers
    5. Now unhook torsion arms
    6. With a protractor rotate bearing carriers 57 degrees
    7. Re-attach torsion arms (arms may need to be lengthened or shortened)
  • Swindell Series Sprint Car Torsion Bushing Tool
    Swindell Series Sprint Car Torsion Bushing Tool
    x
                

    Use this simple tool to easily and safely drive bushing into the torsion bar tube. This tool helps to prevent bending or breaking of the bushing flange. This tool is made in the USA and is a must for any tool box. Add the Swindell Series bushings (910-37117) for the perfect combination.

    • Made in the USA
    • Helps to safely install torsion tube bushings
    • Prevents bending or breaking of the bushing flange
    Sammy says, "I've been using a tool like this for years to easily install bushings without damage. This is a simple yet effective solution to safely installing bushings without damaging them." 

     

  • Coil-Over Shock Mock-up Tool
    $58.99
    Product Rating: 5.00 Stars
    Coil-Over Shock Mock-up Tool
    x
                
    • Allows simulation of vehicle ride height for fabrication purposes
    • Include 5/8" rod ends, jam nuts, quick pin, and reducer for rod ends from 5/8" to 1/2"

    Builders Tip:  If you cut a short piece of roll bar padding shown below and install it around the coil over mock up assembly, the o/d of the roll bar padding will replicate the o/d of the coil over spring to be used.  This will allow the builder to visualize and consider where and how it needs to be mounted for clearances as if the coil over springs were in place.

  • DECO Bump Steer Gauge
    $169.99
    DECO Bump Steer Gauge
    x
                An exclusive design, our Bump Steer Gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as the front suspension moves up and down over bumps. 

    Quality features include precision ground steel plate; plate level; bottle jack with adjustable height and location; adjustable height gauges.

    Slotted mounting holes on plate allow use on 4 1/2" -5" BC without removing rotors. Also works with wide 5 hubs.

    910-82700 Instructions (pdf)

  • Speedway Standard 3 Inch Through 6 Inch Set-Up Blocks
    Speedway Standard 3 Inch Through 6 Inch Set-Up Blocks
    x
                

    The adjustable set-up blocks the Pros use! Adjustable in 1/4" increments.

  • Penske Sweep Tool
    $24.99
    Penske Sweep Tool
    x
                You no longer need to hunt for something to adjust your Penske shock. This tool is made specially to handle that task. 
            
  • QA1 1891-103 Adjustable Ball Joint Tool Kit
    QA1 1891-103 Adjustable Ball Joint Tool Kit
    x
                

    QA1’s patented Ultimate Ball Joints are 100% owner rebuildable. Adjustment tool kit and multiple stud lengths are available.

    Kit includes:

    • Tool Wrench Spanner
    • Tool Allen Hex Key
  • DECO Radius Rod Building Tool
    DECO Radius Rod Building Tool
    x
                This radius rod building tool is a simple tool for setting the length of tie rods and radius rods. Fits 1/2", 5/8" and 3/4" rod ends.  32" long.
            
  • Coil-Over Spanner Wrench
    $6.99
    Product Rating: 4.21 Stars
    Coil-Over Spanner Wrench
    x
                

    This coilover adjustment tool allows for easy adjustment of ride height on your coil-over shocks. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use. Spanner wrench will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits, which makes it a must have if you have coil-over shocks!

    • Adjustment of ride height on your coil-over shocks
    • Will fit common 2-5/8" diameter and 1-7/8" diameter coil-over shock kits

    Note: To make easier use of these wrenches, it is recommended that spring pressure be relieved before adjusting. We also recommend using a coil-over bearing kit between your spring and adjuster nut for much easier movement.

     

  • Liquid Level with 12 Foot Hose
    Liquid Level with 12 Foot Hose
    x
                Essential to achieve accurate chassis set-up. Quick and easy, simply fill with fluid. Use for leveling scales or wheel pads. Impact resistant, two 12" containers and 12 ft. connecting hose. 
            
  • DECO Magnetic Caster Camber Gauge
    DECO Magnetic Caster Camber Gauge
    x
                

    High-quality cast aluminum. +8° to -4° caster range, +6° to -6° camber range. Gauge machined at both ends for easy and accurate caster settings. Anodized and laser-etched for easy readings. Equipped with magnetic adapter.

    Includes carrying case.

    Caster Angle Illustration (GIF)

    Magnetic Caster Camber Gauge Instructions (PDF)

  • P-Ayr Products 5020 GM TH350 Set-Up Transmission
    P-Ayr Products 5020 GM TH350 Set-Up Transmission
    x
                

    Made of closed cell polyurethane and is molded directly from original castings. Easily painted.

    For mock-up purposes only!

  • DECO Hydraulic Coil Spring Rater, 0-1000 Lbs.
    DECO Hydraulic Coil Spring Rater, 0-1000 Lbs.
    x
                Take the guess-work out of chassis setup. This hydraulic coil spring rater is portable which allows you to check your springs anywhere. Adjustable plate works with springs up to 14" tall. Includes a large, easy to read 4" gauge. Gauge reads from 0-1000 lbs. in 10 lb. increments.

    Don't be fooled by copies. DECO is the innovator of the original patented design for guaranteed accurate results.

    300-1000 Instructions (PDF)

  • Economy Caster/Camber Gauge
    $34.99
    $39.99
    Product Rating: 4.50 Stars
    Economy Caster/Camber Gauge
    x
                

    Just in case you can't step up to a $300 digital caster/camber gauge, we offer this very affordable bubble unit. Easy to use and handy to boot, this little jewel will read +/- 7° and is accurate to 1/8°. Adjustable magnets attach to your hub. Aluminum construction.

    Caster Angle Illustration (GIF)

    910-82610 Instructions (PDF)

  • Longacre 78324 Long Chassis Height Gauge
    Longacre 78324 Long Chassis Height Gauge
    x
                

    These slick chassis height gauges allow you to preset the desired height and slide gauge under car. Simply adjust height till frame rail touches end of tape.

    • 36" for straight rail cars on right side
    • Measures height from 2" to 10" (higher if needed)
    • Works 3 ways - with scale pads or without

    Works in 3 Different Ways

    1. Car on the ground - measures chassis height directly, accurate to 1/16".
    2. Car on scale pads - measures from top of pads - ground level - to frame directly (no subracting needed here).
    3. Measures chassis height dynamically, as you work on the car. Magnet holds tape to frame. Indicator shows height as the car moves up and down. Use set of 4 to quickly see height at all 4 corners. You don't even need to bend over.
  • P-Ayr Products 2020 Small Block Chevy Set-Up Block
    P-Ayr Products 2020 Small Block Chevy Set-Up Block
    x
                

    These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

    Just a few of the features include:

    • Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
    • Accepts original front and rear main caps
    • Accepts original oil filter
    • Easily painted
  • Intercomp SW500 E-Z Weigh Scales
    $1,039.99
    Product Rating: 5.00 Stars
    Intercomp SW500 E-Z Weigh Scales
    x
                

    Free Scale Box with Purchase! A $250 Value!

    • Displays Setups to One-Hundredth of a Percent!
    • Stores 100 Chassis Setups
    • Baseline Setup Recall
    • User Selectable Display Modes
    • View Any Combination of Scale Pad Weight & Percentage
    • Center of Gravity Calculation
    • Target Tune Feature
    • Certified to 0.1% Accuracy 
    • Standard 9-volt Battery Operation
    • RS232 Output
    • Giant 0.5" Display Characters
    • 1,500 lb (700 kg) Pad Capacity
    • 6,000 lb (2,800 kg) System Capacity
    System Includes:
    • 15"x15"x2.5" (381x381x64mm) Billet Scale Pads
    • 9-Volt Battery
    • 2-Year Warranty
    • Case for electronic box

     

     

     

  • Proform 67650 Economy Scale System
    Proform 67650 Economy Scale System
    x
                

    Perfect for Mini Sprints. 

    • Oversized easy to read digital display.
    • Display box mounted in carrying case.
    • 20' cables are labeled for correct hook up.
    • 1/10% accuracy.
    • 14-1/2"x9-1/2"x2-1/2" pads.
    • 1250 lb. per pad, 5000 lb. total capacity.
    • Includes scale pad case.
    • Powered by four AA batteries. 
    A newly designed LCD display interface, that includes these additional features:

    • Cross Weight
    • Side/Side Weight
    • Front/Rear Weight
    • Battery Charge Indicator
    Proform Economy Scale System Instructions (PDF)
  • Storage Cart for Scales
    $279.99
    Storage Cart for Scales
    x
                

    This handy cart not only stores your scale pads, cables, display box and ramps, but also makes moving them around a snap!

    Dimensions are 21" x 21" x 35". Assembly required.

    Scale system is not included!

    910-82104 Instructions (pdf)

  • Speedway Forged Aluminum Coilover Wrench
    Speedway Forged Aluminum Coilover Wrench
    x
                

    This forged aluminum spanner wrench tool makes coil-over adjustments easier than ever.

  • Speedway Standard Set-Up Blocks, 1-3/4 - 4 Inch
    Speedway Standard Set-Up Blocks, 1-3/4 - 4 Inch
    x
                The adjustable set-up blocks the Pros use! Adjustable in 1/4" increments. Magnetic.
            
  • P-Ayr Products 2120 Big Block Chevy Set-Up Block
    P-Ayr Products 2120 Big Block Chevy Set-Up Block
    x
                

    These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

    Just a few of the features include:

    • Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
    • Accepts original front and rear main caps
    • Accepts original oil filter
    • Easily painted
  • Ball Joint Pickle Fork
    $8.99
    Product Rating: 4.00 Stars
    Ball Joint Pickle Fork
    x
                Break loose ball joints. Also known as pickle forks. Opening size is 15/16" for ball joint. 
            
  • Longacre 78290 Digital Caster Camber Gauge
    Longacre 78290 Digital Caster Camber Gauge
    x
                

    Here's a super accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed, and at a price any serious team can easily justify. It comes with our latest Super Magnetic adapter and a padded silver carrying case. As an additional benefit the AccuLevel digital readout can be removed and used separately as a digital angle finder for suspension, spoiler angles, and many other things.

    • Digital Caster/Camber Gauge
    • AccuLevel Pro Model with back light
    • Super Magnetic adapter
    • Padded carrying case

    475-78290 Instructions (PDF)

  • One Weigh Electronic Wheel Scale System
    $899.99
    $999.99
    One Weigh Electronic Wheel Scale System
    x
                REB-CO 1 Weigh Wheel Scale System:
    • New Oversized Display Screen
    • Full-time display of individual four-wheel weights, total weight, and percentage
    • Touch of one button displays either four wheel weights or all percentages
    • Tangle free, color coded cables
    • Accuracy and repeatability to within .1 percent
    • Operates off of 2 each 9-volt batteries
    • Two-year limited warranty
    FREE scale pad carrying case with purchase of this scale system. A $250 value!
  • Speedway Shock Wrench, QA1 Big Body
    $59.99
    $99.99
    Speedway Shock Wrench, QA1 Big Body
    x
                
    • CNC machined aluminum
    • Extra long handles for maximum leverage
  • Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    Moose Blocks 5130 Pro 1 3/4 Inch through 4 Inch Set Up Blocks
    x
                

     No need for old individual set up blocks. These adjustable blocks will do the trick of many other sets in one. For any type of Sprint Car, Midget or Micro.

    • Adjustable in 1/8" increments. 
    • Magnetic. 
  • Proform 67649 Billet Aluminum Scale Ramps
    Proform 67649 Billet Aluminum Scale Ramps
    x
                
    • Black anodized billet aluminum scale ramps
    • Peak height is 2 3/8”
    • Set of 4
  • DECO Frame Height Gauge, 3 Inch to 4-3/8 Inch
    DECO Frame Height Gauge, 3 Inch to 4-3/8 Inch
    x
                Quick and accurate way to measure frame height. Covers frame heights from  3" to 4-3/8" in 1/8" increments. Sturdy steel construction. No flimsy  plastic here!
            
  • P-Ayr Products 3051 Ford 4.6L Short Set-Up Block Only
    P-Ayr Products 3051 Ford 4.6L Short Set-Up Block Only
    x
                

    These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

    Just a few of the features include:

    • Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
    • Accepts original front and rear main caps
    • Accepts original oil filter
    • Easily painted
  • Moose Blocks 5140 Pro 3 Inch - 6 Inch Adjustable Set Up Blocks
    Moose Blocks 5140 Pro 3 Inch - 6 Inch Adjustable Set Up Blocks
    x
                

     No need for old individual set up blocks. These adjustable blocks will do the trick of many other sets in one. For any type of Sprint Car, Midget or Micro.

    • Adjustable in 1/8" increments. 
    • Magnetic. 
  • Intercomp SW787 Wireless Scale System
    $1,439.99
    $1,449.99
    Product Rating: 5.00 Stars
    Intercomp SW787 Wireless Scale System
    x
                

    Displays Setups to One Hundredth of a Percent! Intercomp’s PC Wireless Scale Systems combine our ultra accurate Billet Scale Pads with Intercomp’s tested & proven advanced RFX™ Wireless Weighing Technology.

    Software compatible with: Windows® 2000, Windows® XP, Vista™ & Windows® 7.

    • Laptop not included, shown for reference only
    • 15" X 15" X 2.5" Wireless billet pads
    • RaceWeigh software for PC
    • AA alkaline batteries for scale pads
    • 1,500 Pad capacity, 6,000 lb system capacity
    • 2 year warranty
    • Includes FREE scale pad box (a $249.99 value)  
    • Fully Integrated RFX™ Wireless Technology      
    • RS232 Output to Printer
    • Store & Recall Chassis Setups  
    • 400hr Average Battery Life in Pads

    NOTE: Laptop NOT included.

  • T Bar Mockup Kit for Mustang II Front Suspension
    T Bar Mockup Kit for Mustang II Front Suspension
    x
                These adjustable mockup kits are great for determining the desired ride height for Mustang II crossmember and front end assemblies.  They are easy to use and will give you the exact measurements you will need for final assembly.
    • Use to determine ride height with MII installations
    • Adjustable up to 3"
    • Make you next mockup easy and exact
  • Intercomp 100059 Digital Coil Spring Tester
    Intercomp 100059 Digital Coil Spring Tester
    x
                This Intercomp digital coil spring tester will read from 0-5000 lbs. which means one spring tester is all you need.   

    The digital pressure gauge reads in one lb. increments and the digital travel scale reads to 1/1000th. Will test up to 6" diameter springs, 18" long.

  • Longacre 72702 Computerscales WIRELESS AccuSet II
    Longacre 72702 Computerscales WIRELESS AccuSet II
    x
                
    Save yourself time with the II and its baseline memory recall. It will store your baseline setup so you can compare it to your current setup. It has 1 slot memory that is easy to use and very helpful. The display will show all 4 wheel weights plus the cross weight. The partial % will show with the push of one button. The display face is slanted for easier viewing.
    • Accuset II control box with ZigBee wireless receiver
    • Includes Free deluxe scale pad box
    • 4 wireless pads
    • No wires to trip over, no fragile modules outside the pad
    • 4 line display shows all weights and partial %
    • LMF Satin finished pads with single load cells
    • CNC machined 15" low profile scale pads with handles and recessed connectors
    • 1/10% accuracy and 1500 lbs per pad capacity
    • Two-year limited warranty
  • AFCO 20134-7 Big Body Steel, 19, 23, 24, 25 Series, 7 Inch Sleeve
    AFCO 20134-7 Big Body Steel, 19, 23, 24, 25 Series, 7 Inch Sleeve
    x
                AFCO Coil Over Hardware for Big Body Steel (5 Inch OD) 19, 23, 24, & 25 Series Shocks
            
  • Howe Racing Enterprises 2154 Ball Joint Spreader Tool
    Howe Racing Enterprises 2154 Ball Joint Spreader Tool
    x
                Never ruin another ball joint by beating on it with a hammer. This handy tool is placed between the upper and lower ball joint, then turned to push the ball joint from the spindle. Compressed height 4-1/8", extended height 6-1/4".
            
  • Intercomp SW650 Quick Weigh Wireless Scales
    Intercomp SW650 Quick Weigh Wireless Scales
    x
                

    The Intercomp SW650 Chassis Scale is loaded with features and will display setups to one hundredth of a percent.

    • Fully Integrated RFX Wireless Weighing Technology
    • Encryption Ensures Secure Wireless Communication
    • USB & RS232 Output
    • Certified to 0.1% Accuracy
    • Stores 100 Chassis Setups
    • Baseline Setup Recall
    • Center of Gravity Calculation
    • User Selectable Display Modes
    • Target Tune Feature
    • Giant 0.5" Display Characters
    • Backlit for Low-Lighting Conditions
    • View Any Combination of Scale Pad Weight & Percentage

    Includes a FREE scale storage box! (part # 910-82100, included with the purchase of this scale system)

Goto Previous PagePrevious Page
1 2 3 4