Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop Tools At Speedway Motors

The right tools can make any job easier. Whether you are working in the shop, in the pits or on a new engine, Speedway Motors has the tools you need to get the job done quickly and done right.

"Tools, Axle Service" Page 1 of 1

  • Wehrs Machine WM22 Gundrilled And Solid Axle Puller
    Wehrs Machine WM22 Gundrilled And Solid Axle Puller
    (Part #91082309)
    x
                
    • Will work for solid or gundrilled axles
    • 3/8"-24 stud with 3/4"-16 adapter
  • JAZ Products 700-009-01 Low Profile Protecto Pumpkin Case
    JAZ Products 700-009-01 Low Profile Protecto Pumpkin Case
    (Part #458100)
    x
                

    Low profile, horizontal storage, with interlocking stack design for easy storage in trailer. Sealed to protect your 9" Ford carrier and your trailer!


    Measures 14" x 20" x 12" when closed.

  • Speedway Vertical Load Pumpkin Case - Red
    Speedway Vertical Load Pumpkin Case - Red
    (Part #91081080)
    x
                Vertical load storage box for 3rd member with bolt down lid, non-stacking case design.
            
  • Econo Ring and Pinion Set-Up Tool Kit
    Econo Ring and Pinion Set-Up Tool Kit
    (Part #91082720)
    x
                

    All the special tools needed to install your ring and pinion: a dial indicator with stand, yoke lock/carrier bearing nut wrench.

    Resolution accuracy is .001

    910-82720 Instructions (pdf) 

  • Auto Dolly M998084 Engine Stand Axle Adapter
    Auto Dolly M998084 Engine Stand Axle Adapter
    (Part #91098084)
    x
                

    The Auto Dolly Motor Stand Axle Adapter allows you to inspect and service the rear gears, wheel bearings, and brakes without getting down on the shop floor. Takes advantage of the flexibility and manuverability of your engine stand. Painted finish.

    • Holds work securely at comfortable working levels and angles 
    • Axle can be rotated 360°
    • Made of rugged 1/4" plate steel
    • Easy to mount and adjust
    • Includes all necessary hardware
    • Made in the USA
  • Henchcraft Chassis Mini Lightning Sprint Chain Brake Tool
    Henchcraft Chassis Mini Lightning Sprint Chain Brake Tool
    (Part #91082314)
    x
                

    New from Henchcraft Chassis, this all in one chain tool quickly breaks and assembles your 530 chain with a single tool. Durable steel construction ensures years of use.

    • Double sided design allows for assembly and disassembly
    • Only tool needed for chain length adjustments
    • For use on Henchcraft Mini Lightning Sprint chassis
  • Wehrs Machine WM3 9 Inch Ford Carrier Bearing Tool
    Wehrs Machine WM3 9 Inch Ford Carrier Bearing Tool
    (Part #91082740)
    x
                

    This handy spanner wrench allows you to properly adjust the side carrier bearings on a 9" Ford rear end. Works with carrier bearing adjuster rings that have perfectly ROUND holes only (as pictured). Will not work on rings with elongated or oval holes.

  • Yoke Lock/Adjustable Wrench
    $21.99
    Product Rating: 4.00 Stars
    Yoke Lock/Adjustable Wrench
    (Part #91682724)
    x
                
    Yoke Lock/Adjustable Wrench
  • Chain Breaker Press And Riveting Tool
    Chain Breaker Press And Riveting Tool
    (Part #960158467)
    x
                
    • Complete chain tool for most 520, 525 and 530 standard o-ring chains
    • Break, press and rivet your chain with one compact tool
    • Will rivet hollow nose master links (will not rivet solid soft-nose pins)
    • Will push pin completely through link/side plate
    • Hardened body, riveting tip and breaker pin for strength and durability
    • Removable handle for compact storage
    • Perfect for your tool chest if you have a chain with a rivet master link
    • 1 year limited warranty
  • 9 Inch Ford Pro Ring & Pinion Setup Tool Set
    9 Inch Ford Pro Ring & Pinion Setup Tool Set
    (Part #91082725)
    x
                The most accurate 9" Ford ring and pinion tool available. It uses the same bearing the carrier uses to insure proper center line to pinion measurement.  Does not assume that the cap is on the center as other tools do. 

    Comes complete with indicator to set back lash, wooden storage box and instructions on proper usage.

    910-82725 Instructions (pdf)

  • JAZ Products 700-010-01 Vertical Load Protecto Pumpkin Case
    JAZ Products 700-010-01 Vertical Load Protecto Pumpkin Case
    (Part #458105)
    x
                Vertical load storage box for 3rd member with bolt down lid, non-stacking case design.
            
  • Assembly Stand for 9 Inch Ford Differential
    Assembly Stand for 9 Inch Ford Differential
    (Part #91081005)
    x
                Mount this assembly stand to your work bench (or engine stand) and stop wrestling with the third member every time you need to replace a gear set or spool. Saves you time and energy!  Rotates 360° for total access to your assembly.
            
  • Spindle Nut Wrench Socket, 2-3/8 Inch Hex
    Spindle Nut Wrench Socket, 2-3/8 Inch Hex
    (Part #91082301)
    x
                

    No more banged up knuckles or scratched up Anodizing.  This special aluminum end wrench in 2-3/8”  Hex will tighten up your spindle nuts.

    Spindle Nut Wrench

    • Sized for most popular combinations
    • Saves time and frustration
    • 2-3/8 Inch Hex End
    • Sized for most popular combinations
    • Purple anodized
    • 1/2" drive fits 2-3/8" O.D. nuts
    • Fits all 3/4 ton and Wide 5 spindle nuts. 

     

     

  • Grand National Axle Nut Wrench
    Grand National Axle Nut Wrench
    (Part #91082302)
    x
                Rear axle socket for our Ford 9"-based Grand National rear ends. Fits 1/2" drive ratchet. Aluminum construction.
            
  • Garage Sale - Laser Chain Alignment Clamp
    Garage Sale
    Garage Sale - Laser Chain Alignment Clamp
    (Part #UP42852)
    x
                

    This item is garage sale priced because the laser is not included.  Will require a laser of 9/16" body diameter or smaller.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    • No More Measuring!
    • Billet Construction
    • Precision Accuracy

    Never lose a chain again!  Machined and factory calibrated for precision accuracy, this tool will save you time and money.  Simply use the thumb screw to fasten to the top of your rear sprocket and align to the center of your counter sprocket. 

  • Garage Sale - Chain Breaker Press And Riveting Tool
    Garage Sale
    Garage Sale - Chain Breaker Press And Riveting Tool
    (Part #UP40105)
    x
                Please view the product's page for more information
            
  • Garage Sale - Chain Breaker Press And Riveting Tool
    Garage Sale
    Garage Sale - Chain Breaker Press And Riveting Tool
    (Part #UP47897)
    x
                Please view the product's page for more information
            
  • Garage Sale - Laser Chain Alignment Clamp
    Garage Sale
    Garage Sale - Laser Chain Alignment Clamp
    (Part #UP42856)
    x
                

    This item is garage sale priced because the laser is not included.  Will require a laser of 9/16" body diameter or smaller.  Thumb screw is NOT included.  Customer will have to supply their own thumb screw or a #10-32 screw.

     

    **NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS**

     

    • No More Measuring!
    • Billet Construction
    • Precision Accuracy

    Never lose a chain again!  Machined and factory calibrated for precision accuracy, this tool will save you time and money.  Simply use the thumb screw to fasten to the top of your rear sprocket and align to the center of your counter sprocket.