Since its founding in 2001, Titan Tools has keyed on the owners and employees experience, education, and training which has helped them see rapid growth. Titan professional quality hand tools and specialty automotive tools are built for long term performance and dependability. If you want world class tools at affordable prices, look no further than Titan Tools.
Knurled for easier grip. Interchangeable Bits. Includes: (1) 1/4" Slotted Screwdriver Bit, (1) #2 Phillips Screwdriver Bit & (1) 1/4" Socket Adapter
This small stainless steel wire brush by Titan Tools is perfect for cleaning aluminum welds. Small sizes makes fitting into tight corners a breeze. The angled handle helps protect knuckles. Sold each.
- Stainless steel bristles ideal for cleaning aluminum welds
- Small size fits into tight corners
- Angled handle helps portect knuckles
- 1/2" x 7/8" x 7"
- Allows for easy surveying of small, hard-to-reach places
- 8mm Camera head size
- 3ft waterproof flexible probe
- 2.31" TFT LCD
- Full color screen
- Image capture and video recording capability
- Built in variable brightness LED camera lights
- 4 useful accessories included: double hook, hook, mirror, and magnet
- Includes 1pc 4G micro-SD card and 4pc AA batteries
- Supports up to 32GB memory
- High speed steel with titanium finish
- Drill multiple sizes with each bit
- 28 hole sizes in 3 bits:
- Bit one: 13 sizes from 1/8" to 1/2"
- Bit two: 6 sizes from 3/16" to 1/2"
- Bit three: 9 sizes from 1/4" to 3/4"
- Powerful 3 lb. magnet
- Shielded sides for targeted pickups
- Telescopes from 5 1/2" to 21 7/8"
- Comfortable textured cushion grip
- Ideal for retrieving dropped parts, fasteners and tools
- Makes short, smooth radius bends up to 180 degrees
- Calibration gauge to indicate angle of bend
- For copper, aluminum and thin wall tubing
- 3/8" maximum bending capacity
- For 1/4", 5/16", 3/8" O.D. tubing
- 12.5 Amps 120V Heat Gun
- Ideal for plastic welding, shrink tubing, and paint stripping
- Dual temperature setting
- 3 position rocker switch: off, high & low
- Durable ABS body
- Double insulated
- 6 1/2 ft. cord
- Rated Power: Low Setting 750W, High Setting 1500W
- Blowing Speed: Low Setting: 10CFM (280 L/min), High Setting: 17CFM (480 L/min)
- Temperature: Low Setting: 572 degrees, High Setting: 932 degrees
Clear protective replacement lenses for Titan Solar Powered Auto Darkening welding helmets.
- Delivers 280 lb/ft of maximum torque
- 1/2" drive anvil is heat treated
- Heavy duty alloy gear case
- Durable all-metal transmission
- 1-Hour quick charger
- Includes durable blow mold carrying case
These HVLP gravity feed spray guns will satisfy your priming and painting needs. They feature a 2.3mm needle and brass nozzle with a 600cc plastic cup, and they come with their own locking air regulator and gauge.
- Brass fluid and air nozzle
- 600cc plastic cup
- Includes locking air regulator with gauge
- Air consumption 7.0-9.0 CFM
- Air inlet 1/4"
- 2.3mm needle and nozzle
- Easy to read fractions on large LCD display
- Use for inside, outside, step, depth, and scribe measurements
- 6" range (150mm)
- Set zero at any position in measuring range
- Fine adjust thumbwheel
- Lock knob
- Stainless steel components
- Protective storage case
- Includes battery
- For fast and easy separation of quick disconnect style fittings
- For use on 3/8", 1/2", 5/8", 3/4", lines
- Necessary for fuel, heater, and A/C line service on many late model vehicles
- Slidecard Packaging
These spray gun holders for gravity feed style guns make it easy to funnel in and refill your canister with more paint/material while holding the gun safely in place while you pour.
- Heavy duty steel construction
- Funnel holder over paint cup for easy fill
This bit driver from Titan Tools attaches to any standard drill to convert it into a right angle tool for those hard-to-reach areas. It features a 1/4" hex shank and a 90 degree angled head swiveling handle. This quality drill attachment is sure to help you complete your project.
- 1/4" hex shank.
- 90 degree angled head swiveling handle
- Converts a drill into a right angle tool
- Stainless outer housing
- Comfortable grip handle
Be sure to pick up a handy set of bits from our selection to go with your new drill attachment!
- SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", & 3/4" wrenches
- 72 fine-tooth ratchet design for fast performance
- Less than 5 degree sweep for use in tight spots
- Chrome vanadium steel
- Reusable storage rack
- 11 Amp
- Adjustable dial speed control
- Lock-on switch for comfort during extended use
- Auxiliary handle mounts either side for left or right-hand use
- Includes Velcro pad for sandpaper, and rubber pad for polishing bonnet
- Also great for grinding tires
- Easy clean up and reliable performance
- Gravity feed ensures virtually 100% material usage
- Stainless steel needle and nozzle set
- Spray pattern adjustment from round to full-fan shape
- Includes pressure regulator and cleaning kit
- Extra long design from maximum torque
- Ball tips for confined areas
- Patent pending textured finish for better grip
- Easy to read laser etched sizes
Contains: 0.05", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" keys.
Item DetailsContains: 0.05, 1/16", 5/64", 3/32", 7/64", 1/8",9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" keys.
- Durable, light weight material is corrosion resistant and flame retardant
- Ultra high performance filters protects against UV & IR
- Automatically changes from a light to a dark state when arc is struck
- Returns to normal when welding stops w/dark to clear adjustments available
- Variable shades from DIN 9 to DIN 13
- Outside sensitivity adjustments provide clear vision both prior and during welding
- Special turnover headband mechanism allows for greater comfort and reduces fatigue
- Utilizes high performance solar cells w/2 built-in 3V lithium batteries as power back-up
- Complies with DIN, ISO, EN safety standards and ANSI Z87.1-2003 standards
- Replacement Lenses: 4.5 x 3.5"
- Automatically adjusts to strip 24 - 10 AWG wire and cable
- Crimps 22 -10 AWG insulated and non-insulated wire terminals
- Crimps 7 - 8mm ignition terminals
- Wire cutter
- Comfortable TPR hand grips
Holds material at 45, 90 or 135 degree angles. Measures 7-1/2" x 4-13/16" holds up to 75 pounds