Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket At Speedway Motors

Speedway Motors’ fantastic selection of ready-to-assemble T-Bucket kits makes it easy and affordable to build a fun, personalized street rod! Speedway kit car packages are designed with the do-it-yourself enthusiast in mind. A variety of crate engines and all engine components are offered for any application. The hand-made fiberglass roadster bodies, frames, and wiring harnesses are engineered for simple, bolt-together construction, making them perfect for rookie rodders and seasoned pros alike.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
x
            

These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

  • Uses 1937-1941 king pin kit
  • For Ford axles 1928-1948
  • Will not work with 1928-1936 Hubs
  • Includes king pin kit

Be sure to include our spindle nut kit (910616004) to properly install these spindles.

Spindle Identification Guide (GIF)

910-32104 Instructions (PDF)

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

915-11655 9 Super 7® Carb Instructions (PDF)

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

9 Super 7   Secondary 3-Bolt 2 Barrel Carburetor, Plain Finish
9 Super 7 Secondary 3-Bolt 2 Barrel Carburetor, Plain Finish
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

For years customers have been either putting up with poor idling multiple carburetor set-ups or spending hundreds of dollars converting the secondary carburetors so they did not have to idle circuits. Now Speedway Motors is offering our popular 9 Super 7® two barrel "secondary" carburetor with all that work already done. No more wasted money!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 Carb is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Primary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Special base plate with no idle circuits or choke linkage
  • Special butterflies and shafts installed
  • Works best with progressive linkage
  • Idle only off the center or main carburetor
  • No more plug foul
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"T-Bucket" Page 1 of 25

  • Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    New
    Wilwood 120-13529-BK Forged Dynalite-M Disc Brake Caliper, Black
    x
                

    The Forged Billet Dynalite-M is specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Black Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    New
    Powermaster 57297 GM 12SI 150 Amp Smooth Look Alternator, Black
    x
                Please view the product's page for more information
            
  • EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    New
    EMPI 16-2059 Bullet Light Assembly, Convex Red, Each
    x
                

    EMPI Bullet lights feature a high power 12-Volt 50 watt halogen bulb with a mirror finish reflector. The compact (approximately 3-1/2" tall by 2-1/2" diameter) housing is made of precision machined aluminum.

    • Bullet Light w/ Red Lens
    • Precision machined aluminum housing
    • Mounts on flat or slightly rounded surfaces
    • Sold Each

  • LS Air Block Off Plate
    $9.99
    $14.99
    New
    LS Air Block Off Plate
    x
                

    These air block-off plates are intended for use on non-pollution controlled, off-road vehicles only.

    • For GM LS engines
    • Hardware and O-ring are included
    • Measures 1-1/2" center-to-center on bolt holes

     

  • Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    New
    Titan Tools 19436 8-Piece Air Hose Blow Gun Kit
    x
                

    This 8-piece air hose blow gun kit from Titan Tools comes with a blow gun handle as well as 7 tips to go along with it.  These kits feature 1/4" NPT female fittings.

    Kit includes:

    • (1) Blow gun
    • (1) Rubber tip
    • (1) Air screen tip
    • (1) Brass tip
    • (1) Safety tip
    • (1) Adjustable tip
    • (1) Nylon tip
    • (1) Safety booster tip
  • Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    New
    Titan Tools 12086 3 Piece 6 Inch Impact Grade Power Extension Bar Set
    x
                
    These 3-piece impact grade power extension bar sets work great for adapting larger or smaller sized sockets to be used with power drills and drivers.
    • Adapts sockets to power drills and drivers
    • Detent ball for secure socket retention
    • 1/4" shank
    • 6” Overall Length
    • Includes: 1/4”, 3/8”, and 1/2” Drive Extension Bar
  • Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    New
    Wilwood 260-13618 Compact Remote Flange Mount Master Cylinder Kit, 5/8 Inch Bore
    x
                Please view the product's page for more information
            
  • Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    New
    Wilwood 260-13622 Compact Remote Flange Mount Master Cylinder Kit, 1 Inch Bore
    x
                Please view the product's page for more information
            
  • Holley 17-14   .75 x 5.125 Inch Air Cleaner Spacer
    New
    Holley 17-14 .75 x 5.125 Inch Air Cleaner Spacer
    x
                

    These air cleaner to carburetor spacers are perfect for fitting your air cleaner to a Street Demon carburetor.  They also allow you to raise the filter up for additional clearance.

    • Air cleaner to carb spacer
    • Durable construction 
    • .75 x 5.125 Inch
  • Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    New
    Replacement 12 Volt Vintage Style Fog Light Bulb, Amber Lens
    x
                

    These vintage style fog lights are replacement for our fog light assemblies (91130653, 91130654, 911364007, and 911364008).  They feature an amber lens, and are perfect for your vintage street rod or custom ride.

    • Replacement for our 12 volt fog light assemblies
    • Amber lens
    • Vintage Lens Pattern Design From the 1940's
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt

     

  • Long Coil-Over Shock Mount Support
    From: $18.99
    New
    Long Coil-Over Shock Mount Support
    x
                

    Speedway sells the ONLY fully engineered shock mount. The 5/8" forged button head bolt looks good while offering maximum support.  The 1-3/4" x 1-3/4" billet aluminum support spacer has internal threads. This allows you to properly support this shock without crushing the bushing like others do, which leads to shock failures. There's a reason major chassis builders use this mount.

    • Billet aluminum
    • 5/8"-24 x 6" forged button head bolt
    • 5/8"-18 nylon locking nut
    • 6" from base of head to end of threads
    • 1-1/4" shock mount base
    • 1.5 O.D., .650" I.D. flat washer
    • Safely mounts to brackets 1/2" thick
    • Includes required washers, nylon lock nut, and longer mount bolt
    • Uses a 3/8" Allen head wrench for holding it while tightening
    • Mount kits sold individually
    • Sold as Each (1)

    916-36011 Instructions (PDF)

     

  • Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    New
    Wilwood 120-13529-RD Forged Dynalite-M Disc Brake Caliper, Red
    x
                

    The Forged Billet Dynalite-M is further enhancement of the venerable Forged Dynalite series calipers. Specifically designed to enhance outboard clearance and is the basis for Wilwood’s new Classic Style brake kits. The latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable models.

    • Aluminum construction
    • Red Powder coat finish
    • 3.3 Pounds
    • Mount Center: 5.25 Inches
    • Mount Type: Lug
    • Mount Side: Universal
    • Type: Stainless
    • 4 Piston
    • Minimum Rotor Diameter: 10.00"
    • Maximum Rotor Diameter: 13.06"
    • Rotor Width: 1"
    • Piston Bore: 1.75"
    • Inlet Thread Size: 1/8-27 NPT
    • Strongest calipers in it's class, with weights starting at 2.80 pounds
  • Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    New
    Ram Clutches 03-004 Ford Clutch Disc Alignment Tool, Steel, 1-1/16-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment tools.  These tools are perfect for installations such as dual discs that are even more critical for proper setup.

    • 1.06" Input Shaft Diameter
    • Input Shaft Spline Count: 10
    • Steel Material Type
    • Sold Individually
  • Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    New
    Titan Tools 21092 19MM Non-Marring Deep Well Lug Nut Socket, 1/2 Inch Drive
    x
                

    These non-marring deep well lug nut sockets from Titan Tools are available with core and sleeve in a 19MM size.  They are for use with 1/2" drive ratchet wrenches.

    • Protects wheel from damage
    • 19MM / 1/2" drive
    • Non-Marring
    • Deep Well style
  • Seal for Spindle Mount Radir Wheels
    $4.99
    $9.99
    New
    Seal for Spindle Mount Radir Wheels
    x
                Inner bearing seal for Ford spindle mount Radir wheels.  

    • Sold each
    • See also 706-1300 for kit with seals and bearings
  • Turn Signal Switch for Speedway Tilt Steering Columns
    New
    Turn Signal Switch for Speedway Tilt Steering Columns
    x
                

    This is a replacement turn signal switch assembly for Speedway tilt steering columns. It fits most GM '69-up and aftermarket tilt columns.

    Includes:

    • Complete pigtail
    • Hazard knob and spring
    • Adapter for earlier GM vehicle connection
  • G-Comp Suspension Replacement Bump Stops, Black
    New
    G-Comp Suspension Replacement Bump Stops, Black
    x
                

    These black polyurethane bump stops are replacement for Speedway G-Comp suspension components and packages.  Sold as a pair, they come with mounting stud bolt and nut included.

    • Replacement for G-Comp suspension
    • Black polyurethane
    • Sold as a pair
  • Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    New
    Ram Clutches 78125HD Heavy Duty Chevy Hydraulic Release Bearing Kit
    x
                

    These hydraulic clutch release bearings are offered in new HD versions to offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

    • Compressed Length: 1.75"
    • Travel: .70"
    • Inlet Fitting: -3 AN
    • Sold Individually
  • Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    New
    Titan Tools 19424 Spot Spray Non-Aerosol Sprayer, Blue
    x
                
    These spot sprayers from Titan Tools are eco friendly and are not for use with paint or flammable propellants.  They feature a 1 quart capacity and are refillable.
    • 80-150 PSI operating pressure
    • Refillable
    • Not for use with paint products
    • Do not use with flammable propellants
    • Eco friendly
    • Blue powder coat finish
  • Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    New
    Ram Clutches 03-001 GM Clutch Disc Alignment Tool, Steel, 1/8-10 Inch
    x
                

    With RAM's 1040 steel alignment tools, you can now get perfect disc alignment for your clutch install without the inaccuracies of plastic alignment.

    • Input Shaft Diameter: 1.13"
    • Input Shaft Spline Count: 10
    • Steel Material
    • Sold Individually
  • Titan Tools 15054 5.5MM Video Inspection Camera
    New
    Titan Tools 15054 5.5MM Video Inspection Camera
    x
                These video inspection cameras from Titan Tools feature a 3.5" full-color screen with 5x variable electronic zoom and a waterproof flexible probe.  These cameras allow for inspection in tight or hidden areas.
    • 3.5 in. TFT LCD (QVGA, 320 x 240) full-color screen
    • Built-in variable brightness LED camera lights
    • 5x variable electronic zoom
    • Waterproof flexible probe
    • Adjustable handle (0, 45, 80 degrees)
    • Changeable screen angle (0 to 90 degrees)
    • Instant video preview
    • NTSC/PAL video out
    • 180 degree image rotation
  • Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    New
    Stainless Steel Tear Drop 12 Volt Fog Light, Amber Lens
    x
                These tear drop style fog lights feature a beautiful stainless steel housing with  an Amber lens.  They also include adjustable mounting and a replaceable  H3 35 watt bulb, and are perfect for your vintage street rod or custom  ride. 
    • Stainless steel Housing With Universal Ball & Cup Adjustable Mounting
    • Quartz Halogen with Replaceable H3 Bulb, 35 Watt
  • Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    New
    Titan Tool 51505 3-Piece Stainless Steel, Brass, and Nylon Brush Set
    x
                

    These 3-piece brush sets include three different style brushes for use in your home, shop, or garage. 

    • Stainless steel, Brass, Nylon
    • Great for multi-purpose use
  • Short Finned Small Block Chevy Valve Covers w/Holes
    New
    Short Finned Small Block Chevy Valve Covers w/Holes
    x
                

    These valve covers not only look cool, they feature a short design and work with Small Block Chevy engines.  Finned with aluminum construction keeps these valve covers lightweight.

    • Short style
    • Finned design
    • Aluminum construction
    • Fits Small Block Chevy V8 engines
    • Includes hardware, baffles, and grommets
  • Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    New
    Rocket Racing Wheels Fire Wheel, 16 x 5, 5 on 4.5, 2.375 Inch Backspace
    x
                These Rocket Fire wheels are designed after the 6 pin drive magnesium   wheels that the Indy Roadsters of the 50s and 60s dominated the track   with. The Rocket Fire features the same  classic six pin ribbed  design, durable high-tech construction, and are precision-crafted  from  A356 aluminum. Originally, six pin wheels  were held on by a pressure  plate and knockoff. The Rocket Fire  re-creates the original  pressure plate and knockoff attachment but with  the capability of a  5-lug bolt on and utilize conical seat open end lug nuts. 

    The 16x5 size allows these wheels to fit the majority of all 16" vintage tires. From the short skinny 500-16 up to the tall 825-16 tire sizes! Mix and Match the Rocket Fire with tall, skinny vintage tires to your traditional hot rod or open wheel roadster, and you've got the ultimate Indy look!

    • Available in painted gray center with machined rib and outer or full As-Cast finish
    • Precision-crafted from A356 aluminum
    • 5-lug bolt on and utilizes conical seat open end lug nuts
    • 16 x 5 Inch Diameter
    • 5 x 4.5 Inch Bolt Pattern
    • 2.375 Inch Backspace
  • Titan Tools 19450 Portable Sand Blaster
    New
    Titan Tools 19450 Portable Sand Blaster
    x
                

    This sand blaster from Titan Tools has a gravity feed for constant flow of blasting materials. It has a capacity of 50 pounds and an operating pressure of 90 psi.

    • Hopper aluminum blast gun 15 material hose
    • Air inlet: 1/4" NPT
    • Nozzle size: 3/16"
    • Minimum air requirement: 3.5 CFM at 50 psi
    • Compatible with any abrasive: silica, sand, steel, grit, glass beads, and pecan shells
  • Powermaster PowerGEN 82111-2 90A GM Short Black 12 Volt Generator
    New
    Powermaster PowerGEN 82111-2 90A GM Short Black 12 Volt Generator
    x
                Please view the product's page for more information
            
  • FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    New
    FK Rod Ends ALJML3 10-32 LH Male Aluminum Heim Joints
    x
                
    FK Rod Ends offers this three piece male heim. The ball is made of 52100 steel that is heat treated and hard chrome plated. The body is made of aluminum and is hard anodized red. The race is heat treated steel alloy that has been zinc plated and chromate treated.
    • Aluminum 3 piece LH 10-32 heim male
    • Ball is 52100 steel, heat treated and hard chrome plated
    • Body is 7075-T6 aluminum, hard anodized red
    • Race is alloy steel, heat treated, zinc plated, chromate treated

    Applications: Clutch, brake, steering linkage, and suspension components on moderate horsepower applications.

    Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.

    Standard Male Rod End Chart (JPG)

     

  • Wilwood 260-3278 Residual Pressure Valve with Fittings
    New
    Wilwood 260-3278 Residual Pressure Valve with Fittings
    x
                
    These in-line pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in disc brake systems. Residual pressure valves are made from billet aluminum with 1/8" npt female threads for the inlet/outlet and color coded for easy identification. Ideal for drag racing, circle track, street rod and many off road applications.

    The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag.

    • Inlet Size: 1/8-27 NPT
    • Inlet Fit: 3/8-24 IF Female
    • Outlet Size: 1/8-27 NPT 
    • Outlet Fit: 3/8-24 IF Female
    • Rate: 2 lbs.

    Instructions (PDF)

    Brake System Builder's Tip (Link)

    Learn more about the proper uses of residual valves by reading our tech article. Brake System Selection

  • Chrome Bullet Style Hub Covers, 5 on 5 Inch
    New
    Chrome Bullet Style Hub Covers, 5 on 5 Inch
    x
                

    These bullet hub/nut covers work great on most steel wheels to give you that cool retro look.  They feature chrome steel construction and are sold as a set of four.

    • Chrome plated steel
    • 5 on 5" bolt patterns
    • Sold as a set of (4)four
  • Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13500 GT 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with the proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.

    • Spec-37 Iron
    • 10.4 Pounds
    • Width: 1.21 Inch
    • Diameter: 11.75 Inch
    • Mount Side: LH
    • Vane Count: 48 CV
    • Type: GT
    • Style: GT Slotted
    • Surface Finish: Plain
    • Balanced
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more

  • ARP 254-4113 Ford N351 Cylinder Head Stud Kit, 1/2 Inch
    New
    ARP 254-4113 Ford N351 Cylinder Head Stud Kit, 1/2 Inch
    x
                

    These ARP head studs are for the 351W block application when using Ford 351N Pro Series cylinder heads. They are a special 1/2" size and feature a 200,000 psi rating.  

    • For use on Ford N351 Pro Series heads with a 351W block
    • 1/2" hex head
    • 200,000 psi rated
    • Heat-treated and cold forged
    • Kit includes hardened parallel washers
  • Universal Long Fiberglass Floor Mount Console
    New
    Universal Long Fiberglass Floor Mount Console
    x
                With these do-it-yourself interior components there's no limit to the   creative uses you'll find! These fiberglass floor consoles allow you   to customize your street rod's interior to suit your style. 
    • Fiberglass construction
    • Long design floor mount console
    • Can be painted, carpeted or upholstered
    • 33.25" long x 8.5" wide x 6" tall
    • Black gel coat
    • Trim this flat bottomed console to custom fit your application
  • TCI Automotive 302820 EZ-TCU GM Overdrive Transmission Control Kit
    New
    TCI Automotive 302820 EZ-TCU GM Overdrive Transmission Control Kit
    x
                Please view the product's page for more information
            
  • GM Aluminum 14 Inch Carbon Fiber Steering Wheel Dress Up Kit
    New
    GM Aluminum 14 Inch Carbon Fiber Steering Wheel Dress Up Kit
    x
                

    These steering wheel dress-up kits are designed for use with 14" diameter steering wheels and 1967-1994 GM style steering columns.  They feature a hydrographic carbon fiber design and come with everything needed to make your steering wheel one-of-a-kind.

    Kit includes:

    • 14 inch carbon fiber hydrographic half wrap
    • Billet aluminum horn button 
      • Plated billet aluminum
      • Fits our 9 billet bolt steering wheel setups
      • Presses into steering wheel adapter
      • Carbon fiber hydrographic design, smooth finish
      • Mounting pattern: 9 hole. Diameter: 4-5/8"
    • Carbon fiber hydrographic billet aluminum steering wheel adapter
      • Fits our billet 9 bolt steering wheel setups
      • Mounting pattern: 9 hole
      • Diameter: 3-1/4"
  • Wilwood 260-13619 Compact Remote Flange Mount Master Cylinder Kit, 3/4 Inch Bore
    New
    Wilwood 260-13619 Compact Remote Flange Mount Master Cylinder Kit, 3/4 Inch Bore
    x
                Please view the product's page for more information
            
  • Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    New
    Afco 8000044402 Universal Dual Cooling Fan Wire Harness, 40 Amp Relays
    x
                These heavy duty dual fans wire harness kits from Afco are designed  as a universal kit for positive or negative controlled units.  They  feature 40 amp relays, heavy gauge wiring, and all connectors needed.
    • Hardware included
    • Color installation instructions included
    • 40 amp relays
    • Positive or Negative controlled
    • Universal for dual cooling fans
    • Temp switch sold seperately
  • Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    New
    Wilwood 160-13498 HD 48 Curved Vane Spec-37 LH Iron Rotor, 11.75 Inch
    x
                

    Wilwood's HD 48 Curved Vane Spec-37 rotors are are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. The HD Series preparation includes full detail machining and smooth pad contact faces without slots.

    • Width: 1.21 Inches
    • Diameter: 11.75 Inches
    • Spec-37 Iron
    • 10.4 Pounds
    • Mount Side: LH
    • Vane Count: 48 CV
    • Style: Plain Face
    • Surface Finish: Plain
    • Type: HD Heavy Duty
    • Suitable for high temperature racing to street use

    Notes:

    Proper Break-In Procedure for Steel or Cast Iron Rotors

    New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best

  • Afco 85287 Electric Fan Switch, 195 Degree On, 3/8 NPT
    New
    Afco 85287 Electric Fan Switch, 195 Degree On, 3/8 NPT
    x
                This AFCO electric fan switch uses a ground wire to  turn the electric cooling fan on. The thermal fan switch features a 3/8" NPT threaded brass body with a spade terminal for hook-up. Cooling  fan switch activates a cooling fan relay (not included, sold seperately)  when the bulb is immersed in coolant that is 195° F. When the engine  cools to 185° F, the contacts on the fan relay switch open, and the fan  stops automatically. Make sure the temperature fan switch bulb is  submerged in the HOT engine coolant.
    • Non-adjustable radiator fan sensor
    • ON @ 195° F
    • OFF @ 185° F
    • Uses ground wire to switch current to fan
  • Dayton Wire Wheel Polished Hub Caps, Pair
    New
    Dayton Wire Wheel Polished Hub Caps, Pair
    x
                

    These hub caps are perfect for your Dayton wire spoke wheels.  They feature a beautiful polished finish and are sold as a pair.

    • Polished
    • For Dayton wire spoke wheels
    • Sold as a pair
Goto Previous PagePrevious Page
1 2 3 4 5 ... 25