Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf
Products

Shop T-Bucket At Speedway Motors

Speedway Motors’ fantastic selection of ready-to-assemble T-Bucket kits makes it easy and affordable to build a fun, personalized street rod! Speedway kit car packages are designed with the do-it-yourself enthusiast in mind. A variety of crate engines and all engine components are offered for any application. The hand-made fiberglass roadster bodies, frames, and wiring harnesses are engineered for simple, bolt-together construction, making them perfect for rookie rodders and seasoned pros alike.

Featured Products
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
Small Block Chevy 4340 Steel H-Beam Rods, Bushed Pin
SKU-91015328
x
            

Heavy duty H-beam connecting rods for S/B Chevy. Full floating wrist pin in silicon bronze bushing. Precision bolt bushing to positively locate cap. Features 8640 PCE 7/16" cap screws.

Weight matched sets of 8. Available in 5.7" or 6.0" lengths.

Speedway Economy 12 Circuit Wiring Harness
Speedway Economy 12 Circuit Wiring Harness
SKU-91064017
x
            

This harness was designed to offer you all the highest quality components in a package designed for cars with minimum accessories. Each wire is color coded and labeled every few inches.

Our prewired 12 circuit kit will fit all your basic needs and makes wiring a painless process. It is designed especially for the street rod without accessories. It also includes horn relay and connector, turn and hazard signals, dimmer switch connector, circuit breaker for headlights, two flashers, one alternator plug, two ignition switch connectors, plus more.

  • Mainfuse box base is 1-7/8" x 3-11/16"
  • Box height is 3-3/4"
12 Circuit Wiring Harness Installation Instructions (PDF)
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
Speedway 1928-1948 Ford Forged Spindles w/ King Pins
SKU-91032104
x
            

These Speedway spindles are one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford king pins.

These spindles fit Ford axles from '28-'48. They can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.

  • Uses 1937-1941 king pin kit
  • For Ford axles 1928-1948
  • Will not work with 1928-1936 Hubs
  • Includes king pin kit

Be sure to include our spindle nut kit (910616004) to properly install these spindles.

Spindle Identification Guide (GIF)

910-32104 Instructions (PDF)

Ford 9 Inch Posi Traction Third Member Assembly
Ford 9 Inch Posi Traction Third Member Assembly
SKU-91048345
x
            

Speedway Motors now offers you a 9" Ford street 3rd member for your street rod. We reclaim genuine Ford 9" housings, clean, inspect and install all new components. All bearings, seals, 1310 series yoke and ring & pinion are new!

These Ford 9" 3rd member assemblies feature new Pro Gears ring & pinion, choice of 3.50, 3.70, 3.89, 4.11 or 4.56, Currie 9-Plus limited slip differential, 28 or 31 spline. Shipped in handy plastic carrying case. Assembled by professionals.

 

Currie Differential Tech Bulletin (PDF)

 

910-48345 Instructions (PDF)

Speedys 9 Super 7    Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
Speedys 9 Super 7 Primary 3-Bolt 2 Barrel Carburetor, Plain Finish
SKU-91511655
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

There have been numerous attempts to reproduce this unit, with little success. "Speedy" Bill Smith of Speedway Motors in Lincoln, Nebraska, took on the challenge to make a great product even better. The 9 Super 7 ® Carb brings this reproduction of the original Stromberg 97 2 barrel carb into the 21st Century!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the choke assembly, accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Secondary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

On the primary 9 super 7 carb the throttle shaft extends from carb body .983" and has the hole on the end to pin the linkage. There is a brass sleeve that the throttle shaft rotates in that extends from the carb body .400 and this leaves the useable throttle shaft length of .583. There is sufficient room for progressive linkage and the manual throttle linkage that rotates over the sleeve.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Choke assembly, accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage

915-11655 9 Super 7® Carb Instructions (PDF)

Note: Not recommended for use with Ethanol fuels.

 

Speedway Universal 20 Circuit Wiring Harness
Speedway Universal 20 Circuit Wiring Harness
SKU-91064027
x
            Whether you're building an option loaded car or just want to have extra circuits available for future updates, this harness is perfect and makes any job painless. Compact 5-1/2"L x 4-1/2"W x 3-1/4"H  fuse block holds 18 standard push-in fuses and can be mounted almost anywhere. 

Each high temperature wire is color coded and labeled every six inches. Also includes GM type steering column connectors. To keep costs down and the quality high, this harness does not include any switches, light sockets or plugs that you would normally already have.

  • Harness has 20 circuits, of which 18 are fused
  • Taillight leads measure 17' long
  • Includes plug for GM column, headlight switch, dimmer switch, and signal flashers

Wiring Harness Installation Instructions (PDF)

9 Super 7   Secondary 3-Bolt 2 Barrel Carburetor, Plain Finish
9 Super 7 Secondary 3-Bolt 2 Barrel Carburetor, Plain Finish
SKU-91511656
x
            

Speedway Motors now offers a reproduction version of one of the most popular carburetors ever used, the original Stromberg 97! Original equipment on '30s and '40s cars and trucks, the Stromberg 97 has long been favored by flathead hot rodders and racers who realized the performance qualities of this timeless fuel supplier.

For years customers have been either putting up with poor idling multiple carburetor set-ups or spending hundreds of dollars converting the secondary carburetors so they did not have to idle circuits. Now Speedway Motors is offering our popular 9 Super 7® two barrel "secondary" carburetor with all that work already done. No more wasted money!

Speedway Motors has incorporated all of the improvements shown above while maintaining the carburetor's original look. Features such as the accelerator pump, main jets and cosmetics have all been faithfully retained. Additionally, each carburetor is individually flow tested and inspected for leaks. Perfection is the result! 

Aesthetically, the 9Super7 Carb is nearly identical to the stock unit, minus the large 97 logo that appeared on the side and the patent numbers found on the float bowl area. Upgraded internal parts include; the float, needle, and seat. Jetting and power valve settings remain as they were for the original 97 carbs as well as the cfm and vacuum specs.

The other similarity that the 9 Super 7 shares with the original 97 is the setup and tuning necessary to yield a well-running machine. While perhaps not as simple as bolting on a single four-barrel, the 9 Super 7 makes setting up a multiple carburetor induction system easier than when Strombergs were available new. All that's required is an intake, a linkage system, a Uni-Syn syncing tool, and a little patience. Be sure to include the Primary 9 Super 7 when installing multi-carb setups. Our 3 Carb kits come with one primary carburetor and two secondary carburetors while the 2 Carb kits are both primary carbs.  See our Multiple Carburetor Tech Tip for more information on using the 9 Super 7 in a 2x2 or 3x2 carb set-up.

  • All-new tooling for crisp, flawless castings
  • New aluminum base assembly allows for cooler fuel temps and better fuel efficiency as compared to the original cast iron design
  • Stainless steel screws and hardware
  • Accelerator pump, and jets have all been faithfully retained and accept standard Stromberg parts
  • Features original Stromberg 0.97" venturi diameter
  • Modern Nitrophyl float and Neoprene gaskets
  • Original troublesome needle and seat replaced by a Grose-style fuel inlet valve to better cope with higher fuel pressures and improved high speed running 
  • Will not stick or dribble like the old Viton-tipped needle and seat setups
  • Grose-style jet valve won't corrode in modern fuel, something the original needle and seat units can't do
  • Comes with a No. 65 power valve and 0.045" main jets, identical to the stock 97
  • Extended brass throttle shaft to simplify multi-carb linkage
  • Special base plate with no idle circuits or choke linkage
  • Special butterflies and shafts installed
  • Works best with progressive linkage
  • Idle only off the center or main carburetor
  • No more plug foul

Note: Not recommended for use with Ethanol fuels.

Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
Smoothie Rams Horn Exhaust Manifolds, Small Block Chevy, Raw
SKU-9300329
x
            

These classic "Rams Horn" style exhaust manifolds are great for use with most small block Chevy applications, providing optimal clearance for angle plug heads.  These manifold kits come complete with all mounting hardware and gaskets.

  • Ground smooth with no external bosses or brackets
  • 2-1/2" outlet
  • Plain, Raw finish
  • Nodular cast iron
  • For angle or straight plug heads
  • Includes all hardware and gaskets

"T-Bucket" Page 1 of 25

  • Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    Speedway Fuel Level Gauge with Sender, 2-1/16 Inch
    SKU-91065042
    x
                

    These fuel level gauge/sender kits feature a domed lens and a stainless steel bezel and a backlit white face.  The fuel sender comes with seal and and all mounting hardware.

    • 2-1/16”
    • Overall Diameter: 2.25"
    • Overall Length: 9.25"
    • Includes sender
    • 240 ohms empty, 33 ohms full
    • Stainless steel bezel
    • Backlit white face
    • Replacement light socket assembly available # 910-65071

    Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

  • Pinstriped iPhone Cover - Gold
    Pinstriped iPhone Cover - Gold
    SKU-2921005
    x
                Let us help you hot rod your iPhone 4.  These slick covers help to protect and customize your smart phone.
    • iPhone 4/4S only
    • Rugged aluminum back plate
    • Slimline rubber edging
  • Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    Aeromotive 11140 340 Stealth Fuel Pump, Centered Inlet
    SKU-91011140
    x
                

    The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. It is a compact, lightweight pump that bolts into many existing hanger assemblies.

    What sets the 340 Stealth Pump apart is its superior flow throughout a wide pressure range. Compared to other popular aftermarket pumps, at 40 psi the 340 boasts more than 340 lph. That’s over 30% more flow, making it ideal for applications requiring more flow while retaining the factory lines and mounting provisions available in the OE configuration. The 340 is also perfect for use as a universal replacement for applications that require more flow to support forced air power adders such as turbo and supercharged applications.

    • Fits most vehicles where popular aftermarket pumps are applicable
    • Designed for in-tank use only
    • Can be used in carbureted or EFI applications
    • Turbine pump mechanism increases durability and can be used in pulse modulated applications

    910-11140 Instructions (PDF)

  • Intercomp Digital Pressure Tester
    Intercomp Digital Pressure Tester
    SKU-91381120
    x
                

    This new pressure setting tool from Intercomp can be used for several jobs. This gauge will work from 0 to 150 psi. in 1/10th of a pound.

    Digital Pressure Tester

    • Large 1/2" back lite display.
    • Gauge features 1/10th of 1% accuracy.

    Setting Mid and High Speed bypasses
    1. Will work to set a high speed up to 150psi.
    2. Comes with a -6 AN female adapter to screw your high speed into

    Setting Tire bleeders

    1. Will work from 0 PSI up. With 1/10th of a pound increments.
    2. Comes with a female quick release fitting that fit the popular Kwick change bleeders.

  • CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    CON2R 7-002 Chrome Wing Nut, 1/4-20 Thread, 2-1/4 Across, 1-1/2 Tall
    SKU-910322
    x
                

    This wing nut is for-sure an attention getter. Perfect topper for the air cleaner on a big four barrel, on top of your tri-power pots or an accent piece wherever you need it.

  • Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    Speedway Extreme Gaskets, 2-1/2 Inch Collector Gaskets
    SKU-91013540
    x
                
    • Reusable triple-layer gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • Race Ramps RR-FS FlatStoppers
    $249.99
    Race Ramps RR-FS FlatStoppers
    SKU-2367000
    x
                

    FlatStoppers were developed as a solution for people having problems with tires developing flat spots when a vehicle is parked for 30 days or longer. Once tires are set on FlatStoppers (on a level surface), they settle into the pad's concave depression, which helps support more of
    the tire. This disperses the weight of the car more evenly onto the tire - helping to prevent any flat spotting. The pads measure 22.3" long x 3.5" high x 14" wide, and will accommodate tires up to 12" wide.

    FlatStoppers will not conduct heat or cold into your tires despite changing floor temperatures.

    Flatstoppers are made with the company's patented super-lightweight 100% solid construction technique - making them highly durable, virtually indestructible, and providing a 6,000 lb. vehicle weight capacity. FlatStoppers' textured coating prevents sliding across floors - including epoxy-coated floors and RaceDeck.

    FlatStoppers won't scratch or otherwise damage floors, and won't rust.

     

  • Titan Tools 51503 Mini Tubing Bender
    $14.99
    $19.97
    Product Rating: 4.50 Stars
    Titan Tools 51503 Mini Tubing Bender
    SKU-72851503
    x
                
    • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
    • Use with Brass, Copper, Steel, or Aluminum
    • Compact for limited accessibility applications
  • Tribute T Modified Split Wishbones
    Tribute T Modified Split Wishbones
    SKU-71545127
    x
                It doesn't get much more traditional than running a  set of split wishbones. These split bones are all new with forged front yokes just  like Henry built them and fit a 2-1/4" axle boss. Modified 5/8" spring  perch boss as used on our Tribute-T kit.
    • 40-3/4" from the front perch bolt centerline to the end of the 11/16"-18 threaded rear bung
    • 5/8" sleeved bore behind axle to allow for spring perch mounting
    • Material thickness is 12 GA (0.1046")
    • Fully boxed
  • Rocket   Strike Wheels, 15 x 8, 5 on 4-3/4, 4 Inch Backspace
    Rocket Strike Wheels, 15 x 8, 5 on 4-3/4, 4 Inch Backspace
    SKU-270586140
    x
                The Rocket Strike from Rocket Racing Wheels provides timeless and classic traditional styling at very affordable prices. They are precision-crafted from A356 aluminum and topped off with a vintage style aluminum O-ring center cap.
    • Classic styling
    • Rugged one piece alloy construction
    • Load rating of 1560 lbs. per wheel
    • Cast finish center with polished rim or fully polished finish
    • 3.00" hub clearance under center cap
    • Snap-in center cap included
    • Lug nuts sold separately (requires 60 degree conical seat)
  • 3/8 X 3/8 Clevis
    $7.99
    3/8 X 3/8 Clevis
    SKU-6680116
    x
                The correct clevis for mounting our rack and pinion units (668-0105 & 668-0115). 
            
  • Swindell Series Sprint Car Set-Up Sheets
    Swindell Series Sprint Car Set-Up Sheets
    SKU-94082050
    x
                
    • Can be used if running a 305, 360 or 410 sprint car
    • 1 tablet contains 50 sheets
    • Easily organize your set-up notes for each race
    • Gives you a permanent record of every adjustment and set-up
    • Designed and used by World of Outlaw and Chili Bowl Champion Sammy Swindell
  • Speedway Tire Coaster Set
    $4.99
    Product Rating: 4.78 Stars
    Speedway Tire Coaster Set
    SKU-91019522
    x
                
    • Made from 100% recycled tire rubber
    • Set of four
    • Four distinct designs in each set
      • Vintage Sprint Mag
      • Kustom Cross-bar Flipper Cap
      • D-hole Stock Car Wheel
      • Redline 5 Spoke Mag
  • Bare 60 Inch Centered 9 Inch Ford Housing
    Bare 60 Inch Centered 9 Inch Ford Housing
    SKU-91046115
    x
                

    Our economical 9" Ford rear axle housing features a reclaimed center section, new 3" axle tubes, and new-style Ford ends. Total track width is 60" from hub-to-hub. You will need one 28-3/8" long axle and one 30-5/8" long axle.   Includes 8 T-bolts for the axle bearing retainer plates and 10 studs for the 3rd member.

    Third member sold separately.

     

  • Deluxe 45 Degree Brake Flaring Tool
    Deluxe 45 Degree Brake Flaring Tool
    SKU-91170081
    x
                
    • Easily form 45-degree double, single and bubble flares in OE steel, stainless steel and soft metal tubing
    • For use with 3/16"-, 1/4"-, 5/16"- and 3/8"-diameter lines
    • Turret-style design allows you to make those precision flares in minimal time
    • All the brake-flaring forming dies you need are mounted right on the turret
    • T-handle screw clamp securely holds your line in place during forming
    • Vise-mounted
    • Packaged in a blow-molded case

    Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.



  • Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    Metal Pegboard Tool Organizer, 32 x 32 Inch Wall Control Storage System
    SKU-9103232
    x
                Durable, all-steel construction will not warp, fray  or crack. Attractive, scratch  resistant,  baked-on powder coat finish wipes clean for long-lasting  beauty for any  shop or work area. Installation is easy and absolutely no  framework is  required. 
    • 32" tall x 32" wide x 3/4" deep
    • Pack of two
    • Durable and versatile
    • 20 gauge steel with a baked-on rust and scratch resistant finish
    • Slotted to accept Wall Control accessories
    • Holes accept conventional 1/4" peg hooks
    • Choose from blue, grey, red, white, or galvanized steel
  • Longacre Accuset II Scale Kit
    $999.99
    Product Rating: 4.00 Stars
    Longacre Accuset II Scale Kit
    SKU-47572593
    x
                
    • Push one button for all 4 wheel weights plus cross weight
    • Push a second button for all partial %
    • Baseline memory recall
    • Heavy duty red HiFlex cables with billet AN connectors
    • 4 LMF™ swirl finished 15" x 15" low profile pads
    • 1500 lb. per pad capacity, 6000 lb. total
    • 2-year limited warranty
    • Includes FREE scale pad box

    Instructions (PDF)

  • OTB Gear 6870 Finned Cover For Round Back 9 Inch Rearend, Polished
    OTB Gear 6870 Finned Cover For Round Back 9 Inch Rearend, Polished
    SKU-91068700
    x
                The perfect cure for the boring pumpkin. The sturdy and popular Ford 9"  rearend needs a little work to look stylish... at least thats what we  thought. This new cover is cast in A356 aircraft grade alloy and  available in a highly polished finish. No hardware is  needed to attach - we provide a generous supply of high temperature  adhesive (600 degree).
    • Excellent compliment to the new & improved Speedway 9" housing (910-46100)
    • Will fit most factory 9" Ford rear axle housings that have a bulge on the back of the housing for the ring gear, such as our axle # 910-46100 and other similar rear housings
    • No hardware is needed to attach
    • Generous supply of high temperature adhesive (600 degree) included
    • Can be powder coated after assembly
    • Will not fit Currie except, CE2000N made prior to September 2009
    • Will not fit axle housing used in Speedway #s 910-45100 and 715-700
    • Catalog correction, # 338 p# 61 shows the incorrect style of housing that this cover fits

    Instructions (PDF)

     

  • 55 Degree Steering Column Mount for T-Bucket Kit
    55 Degree Steering Column Mount for T-Bucket Kit
    SKU-7154255
    x
                
    These mounts are the economical mounting solution for T-bucket steering columns.  They are designed to be used in conjunction with our 1-3/4" diameter stainless or plain steel hot rod steering columns.
    • Mount puts the steering column at a 55 degree angle to the firewall
    • Fits all of our deluxe "T" bodies with the floor / firewall installed
    • Designed to be used with a 1-3/4" diameter steering column
  • Speedway Tribute T-Bucket Interior Kit
    Speedway Tribute T-Bucket Interior Kit
    SKU-7151104
    x
                Please view the product's page for more information
            
  • Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    Accel 9011C GM HEI 75-86 Extreme 9000 Spark Plug Wires-Over Valve
    SKU-1059011
    x
                

    Accel offers the cure for burnt spark plug wire boots with the Extreme 9000 Series Ceramic spark plug wire set. These 8mm spiral core spark plug wires have ceramic boots on the spark plug end of the wires which makes it impossible to melt or burn boots. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots.

    • 8mm Ferro-Spiral EMI/RFI supression core
    • 500 Ohms/ft resistance
    • Ceramic boots will withstand 2000° F
    • Stainless terminals
    • For 1975-86 GM small block V8 HEI (over valve covers)

    Ceramic Wire Core Cut-A-Way (Link)

  • Standard Workbench Tool Organizer Kit, Wall Control Storage System
    Standard Workbench Tool Organizer Kit, Wall Control Storage System
    SKU-91030400
    x
                Over 10.5 sq. ft. of storage space and assorted  shelving options, hooks and brackets. The standard workbench provides  the superior, easy access storage needed for a safe and efficient  workspace.

    Galvanized steel panels are easy to install with pre-drilled mounting holes on 16" centers. A built-in frame flange provides ample hook clearance and full access to all holes. The patented Double Offset hook engagement improves hook and stability for safer, more secure tool storage. 

    Included:
    • (3) Combo panels 32" x 16"
    • (1) 9" shelf assembly with dividers
    • (1) 6" shelf assembly
    • (3) Plastic bins with bin hanger
    • (1) Screwdriver holder assembly
    • (1) Hammer bracket
    • (20) Assorted hooks & brackets
    • Mounting hardware & instructions
    • Choose from red, white, blue, or black
  • Rocket Strike Wheels, 15 x 7, 5 on 4-1/2, 4-1/4 Inch Backspace
    Rocket Strike Wheels, 15 x 7, 5 on 4-1/2, 4-1/4 Inch Backspace
    SKU-270576542
    x
                The Rocket Strike from Rocket Racing Wheels provides timeless and classic traditional styling at very affordable prices. They are precision-crafted from A356 aluminum and topped off with a vintage style aluminum O-ring center cap.
    • Classic styling
    • Rugged one piece alloy construction
    • Load rating of 1560 lbs. per wheel
    • Cast finish center with polished rim or fully polished finish
    • 3.00" hub clearance under center cap
    • Snap-in center cap included
    • Lug nuts sold separately (requires 60 degree conical seat)
  • Tire Grinding Disc, 7 Inch Nail Head
    Tire Grinding Disc, 7 Inch Nail Head
    SKU-91082081
    x
                
    • 7" diameter
    • Nail head design
    • Very aggressive, check sanctioning body rules before use

    NOTE: Use extreme caution - serious injury can result from the use of discs. When powered by a buffer, these discs can cut your arm or leg off.

    • Never use in a loose tire
    • Never use on a tire that is not inflated and fastened
    • Do not use while wearing loose fitted clothing
    • Use eye and face protection
  • Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    Edelbrock 5412 289-302 Ford Three Deuce Tri Power Intake Manifold
    SKU-3255412
    x
                
    This intake for 3 deuces on a small block Ford does NOT have clearance for the Powerfire, Flamethrower, OEM, or any HEI style distributor. It requires the smaller cap as available on distributor 547-8352
    • 289-302 Small Block Ford 3 deuce aluminum intake
    • Designed to use 3 bolt carburetors such as the Speedway 9 Super 7's
    • For Stock/OEM standard deck
    • RPM range, Idle-5,500
    • Low Rise, Dual-plane design
    • Improved throttle response
    • Made of aluminum
    • Natural finish
  • Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    Mr Gasket 97 Carburetor Insulator Plate, Holley/AFB Carbs, 1/4 Inch
    SKU-55097
    x
                These Mr Gasket Heat Dissipator carburetor insulator gaskets are  top notch when it comes to eliminating the heat transfer from your  intake to your carb. The heavy-duty gaskets are made of heat absorbing gasket material separated by layers of aluminum alloy.
    • For Holley/AFB/Edelbrock carburetors
    • 1/4" thick
    • 4-hole opening
  • Coker Tire 579880 Firestone Vintage Bias Ply Tire, 710-15, Blackwall
    Coker Tire 579880 Firestone Vintage Bias Ply Tire, 710-15, Blackwall
    SKU-579880
    x
                
    • World's best selling line of vintage bias ply tires 
    • Firestone Deluxe Champion quality and reliability is legendary
    • DOT approved
    • Made in original molds to maintain authenticity
    • 28.88" diameter
    • 7.70" section width
    • 4.50" tread width
    • Rimwidths 5.5"-7"
    • Load Capacity: 1550 lbs @ 32 PSI
    • 4-ply poly tubeless design
  • Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    Aeroquip FBM4463 Black Hose End Coupler Fitting 180 Degree Angle -8 AN
    SKU-61710271
    x
                

    Aeroquip reusable hose ends are easier to install than cutter-style fittings and are more user-friendly.  With their compression-style design, they can be reused without damaging the fitting, and the nipple pilot prevents damage to the inner tube.  Their one-piece design allows for improved flow and eliminates two potential leak points (brazed joints).  They're available in black anodized finish.

    • 180 Degree 
    • Aluminum
    • Hose End Size: -8 AN
    • Fitting Style: Reusable non-swivel
    • Adapter Size: -8 AN
    • Adapter Attachment: Female threads
    • Lightweight aluminum hose ends are completely reusable, and interchangeable
    • Unique taper design ensures easy assembly
    • 37° angled sealing surface guarantees a positive anti-leak seal
    • Accepts a variety of lightweight aluminum AN style adapters & fittings
    • Available in a Black corrosion resistant finish

    Fitting Thread Application Chart (GIF)

  • 1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    1923 T-Bucket Deluxe Steering Column Kit, Chevy Mount, Polished Stainless
    SKU-71532001
    x
                These steering column kits are perfect for finishing off the steering  system in your '23 T-Bucket Kit car.  They come complete with the  steering column, the mount plate that bolts into our new bodies, and the  proper DD intermediate shafts and U-joints.  The steering column features a 1-3/4" polished stainless steel tube, real ball bearings for  smooth shaft operation and a polished aluminum quick release hub that  will accept the common Grant steering wheel 3-bolt pattern. 15 gauge  mild steel. The 3/4" O.D. DD shaft has a 1.00" long "D" design on each  end. Made from 1018 steel, weld-on.
    • Includes column, mount plate, and DD intermediate shafts and U-joints
    • For our '23 T kits
    • Included U-Joints:
      • Full compliment bearings
      • Forged Vanadium steel yokes and u-joint
      • Highest quality for racing
      • Features needle bearing u-joints
      • 91032298 U-Joint: 3.875" L x 1.375" D
      • 91032291 U-joint: 5/8"-36 Spline

    Steering Column Instructions (PDF)

  • Speedway Extreme Gaskets, 3 Inch Collector Gaskets
    Speedway Extreme Gaskets, 3 Inch Collector Gaskets
    SKU-91013541
    x
                
    • Reusable triple-layer gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
  • Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    Winters Performance POSTER-10 10-Spline Quick Change Gear Chart
    SKU-8021000
    x
                Perfect for trailers or the race shop!  19" x 25"  Laminated.
            
  • Callies SA0213CS Compstar 4340 Crankshaft, 427 S/B Chevy, 6.0 Rod
    Callies SA0213CS Compstar 4340 Crankshaft, 427 S/B Chevy, 6.0 Rod
    SKU-2498113
    x
                Callie's solid modeling abilities provide a great  advantage in product  development. They’re able to precisely locate  material where it will  yield the greatest advantage in terms of both  strength to weight, and  balance ability.

    Beginning with properly placed counterweights that not only improve balance but reduce bearing loads, every aspect of these highly stressed components has been analyzed. The forgings are rough machined in a process that includes double stress relief operations that make these crankshafts very dimensionally stable.

    Hardened with a deep nitride, Compstar cranks are ideal for all types of abusive racing environments. All rod journals are drilled and counterweights are profiled for piston clearance. With a consistent grind and polish, along with precise stroke and index, you will see why we say these crankshafts are Compstar Correct!
  • Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    Currie CE-98129-27375 27-3/8 Long 31 Spline Rear Axle
    SKU-91046106
    x
                Please view the product's page for more information
            
  • Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    Big Block Chevy Tight-Fit, Block Hugger Headers, Chrome
    SKU-9300102C
    x
                

    Rodders and racers are known for wedging big engines into small spaces, so these big-block Chevy tight-fit headers are designed for applications where space is limited. They offer great flow in a compact package and will fit where many other headers won’t. These shorty headers make difficult installations easy.

    • Fits round-port cylinder heads
    • Compact design fits a wide variety of applications
    • Made from 16-gauge tubing
    • Includes reducers, gaskets, and bolts
    • 1-3/4” primary tube diameter
    • 2-1/2” collector diameter
    • Can be used with most oil filter systems and transmission/starter combinations
    • Will not fit '55-'57 Chevy cars, Camaros, or other modern vehicles which have a crossmember below the engine's center two exhaust ports
    • Fits standard deck big blocks only

    Header Dimensions (GIF)

    Chrome Warning: Due to a revised chroming process brought on by recent EPA regulations and high labor costs, today's chrome is not the quality of days gone by. Be Aware: Exhaust components which are chrome plated are now much more susceptible to blueing, blistering, peeling & corrosion. No warranty or returns on chrome exhaust items once them have been installed.

  • Speedway Extreme Gaskets, SB Chevy, 1-5/8 In Rectangular Port
    Speedway Extreme Gaskets, SB Chevy, 1-5/8 In Rectangular Port
    SKU-91013505
    x
                
    • Reusable triple-layer exhaust gasket
    • Stainless steel with a heat-resistant, rubber-based inner core
    • 0.085” thick, ultra pliable
    • Available for many popular flange configurations
    • Easily conforms to surface irregularities to create a tight, leak-proof seal
    • Works well with a wide range of flange surfaces and block and head materials
  • Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    Flo-Tek 408-500 Big Block Chevy Aluminum Cylinder Head, 360cc, Bare
    SKU-72250360
    x
                
    • Head is sold individually
    • 2.250” intake valve, 1.880” exhaust
    • 360cc intake runners 
    • 128cc exhaust runners
    • 121cc chambers
    • PC seals
    • High temp exhaust seats
    • Manganese bronze intake guides
    • Phosphor bronze exhaust guides
    • Multi angle valve job
    • Angle plugs
    • Sold individually
  • Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    Fast Shafts BBSK-10 Billet U-Bolt Strap Kit, 1-1/16 Inch
    SKU-91048200
    x
                

    NEVER OVERTIGHTEN U-BOLTS AGAIN !! 

    These universal billet strap kits fit 1310 U-Joint, Steel Girdle, Ford 9 inch.  They include case hardened bolts, nuts, flat and lock washers.

    • Billet strap kit
    • Fit 1310 U-Joint, Steel Girdle, Ford 9 inch
    • Include case hardened bolts, nuts, flat and lock washers
  • Rocket Racing Wheels RC1-01401 Chrome Center Cap
    Rocket Racing Wheels RC1-01401 Chrome Center Cap
    SKU-27058007
    x
                

    "Rocket Racing Wheels" vintage style O-ring center cap is constructed of cast aluminum and perfectly matches each Rocket Racing Wheel series.

  • Tri-Bar Wing Nut, Chrome
    $1.99
    Tri-Bar Wing Nut, Chrome
    SKU-9102179
    x
                

    Wing nut is approximately 5/8” tall with 1/4"-20 threads.

  • Speedway Small Block Chevy Classic Headers, Stainless
    Speedway Small Block Chevy Classic Headers, Stainless
    SKU-930CR100S
    x
                

    These small-block Chevy headers have a graceful, nostalgic shape that makes them perfect for T-bucket roadsters and similar hoodless street rods. The classic appearance is backed up by quality construction and an easy-breathing design that can help unlock your engine’s performance potential.

    • Polished Stainless Steel
    • Fits 265-400 c.i. Small Block Chevy V8s
    • Exhaust is routed outside the frame rail and along the side of the car
    • Fits most angle plug heads
    • Extensions and mufflers sold separately
    • Includes gaskets and bolts

    Note: Stainless header tubing when exposed to exhaust temperature will cause the finish to change color which will vary with the exhaust temperature. Please note that the finish of the header when the engine is started, will change to a light champagne color to a darker gold finish and in some instance may even turn dark blue or purple. This can be polished back out when utilizing Blue-away or Simi-chrome polish, but please note that when the headers reach running temperature again, they

Goto Previous PagePrevious Page
1 2 3 4 5 ... 25