Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

T-Bucket

Shop T-Bucket At Speedway Motors

Speedway Motors’ fantastic selection of ready-to-assemble T-Bucket kits makes it easy and affordable to build a fun, personalized street rod! Speedway kit car packages are designed with the do-it-yourself enthusiast in mind. A variety of crate engines and all engine components are offered for any application. The hand-made fiberglass roadster bodies, frames, and wiring harnesses are engineered for simple, bolt-together construction, making them perfect for rookie rodders and seasoned pros alike.

Featured Products
  • Black Push-On Hose, -6 AN
    From: $3.49
    Product Rating: 5.00 Stars
    New
    Black Push-On Hose, -6 AN
    (Part #620106)
    x
                

    AN6 black push-on hose. Ideal for fuel line applications only - NOT suited for oil or water use exceeding temperatures of 200° F.

    • Working Temp:  -40 to +200 degrees F
    • Max Pressure:  150 psi
    • Compatible with gasoline, alcohol, & diesel fuels
    • Choose lengths of 3, 6, 10, 15, or 20 feet.
    • Use with Speedway brand push on fittings
    • When using at temp and pressure at the high end of the parameter, hose clamps should be utilized.

    Hose Fitting Sizing Chart (GIF)

  • Painless Performance 70107 Auxiliary Fuse Block, 7 Circuits
    New
    Painless Performance 70107 Auxiliary Fuse Block, 7 Circuits
    (Part #910701070)
    x
                

    This auxiliary fuse block by Painless Performance can be used to start a custom wiring job or can replace your existing fuse block. It protects your OEM warranty and is compact in size making for easy installation. Has a total of 7 circuits.

    • 7 total circuits
    • 3 constant hot circuits
    • 4 ignition hot circuits 
    Kit Includes:
    • One 40 Amp SPST relay
    • One 50 Amp circuit breaker
    • Relay base/fuse block with harness
    • Crimp-on terminals
    • Mounting hardware

     

  • Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    (Part #8352900632)
    x
                

    Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

    This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

    • Dry Boiling Point:  573° F
    • Wet Boiling Point:  313° F

    8352900632 Instructions (PDF)

  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.14 Stars
    4 Inch Peep Mirror
    (Part #92550745)
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    Wilwood 120-8079-RSP BNSL6R Caliper, 1.62/1.12/1.12 Pistons, 1.10 Disc
    (Part #8351208079RSP)
    x
                The billet SL6R series adds the versatility and convenience of radial mounting to this widely popular caliper group. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc. These calipers integrate "Big Brake" style with Wilwood's latest technology to generate big stopping power in extreme environments over a broad range of vehicle applications. The key to the superior performance of the SL6R comes from the extremely durable and efficient body design. Starting at 4.84 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. Full length stiffening ribs and a reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. When compared to open bridge calipers that use tube or stand spacers between the body halves, the closed end bridge design is measurably stronger with less separation or deflection under load. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.    A unique six-piston differential bore configuration provides balanced loading for even pad wear in sustained high heat environments. The standard SL6R calipers feature one-piece stainless steel pistons. Stainless is used for its slow heat transfer properties and high resistance to corrosion. The SL6R/ST models feature Wilwood's exclusive Thermlock pistons. This multi-part piston design creates a highly efficient thermal barrier to further reduce heat transfer from the pads to caliper body, seals, and fluid. Cooler temperatures translate to longer service life and less chance for heat induced pedal fade.   In addition, each SL6R is equipped with SRS bridge plates. SRS plates eliminate all bridge wear caused by pad gouging and extend the service life of the caliper. The spring-loaded action of the SRS plates also eliminates pad rattle and dampens the harmonic vibrations that contribute to pad squeal. Two piece bleed screws and dampened fluid tubes are recess mounted to shield them from track debris and other potential damage sources. High temperature, square faced bore seals provide the largest possible sealing area and controlled piston retraction on release. The full range of Wilwood pad compounds is available to match the brake response and heat range of any competition or sports driving application.   Calipers in this group feature a reduced width outboard body to provide additional clearance between the caliper face and the wheel or hub. These calipers were originally built for use with wide 5 hubs, but have found their way to OE performance "Big Brake" conversions, road racing, and other close fit wheel applications. The caliper bridge radius will clear rotors from 11.75" to 13.00" in overall diameter. Each caliper in this group uses 7420 type 20mm thick pads.
            
  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • Aluminum Fan Spacers with Bolts
    Aluminum Fan Spacers with Bolts
    (Part #91015720)
    x
                Aluminum fan spacers are required for maximum air transfer.  Fan should be 2" - 4" from radiator.  Spacers available from 1/2" to 2-1/2" thick in 1/4" increments.  Complete with bolts.  Fits 5/8" shaft. 
            
  • Winters Quick Change Gears, 10 Spline
    From: $59.99
    Product Rating: 4.75 Stars
    Winters Quick Change Gears, 10 Spline
    (Part #80285)
    x
                
    • 8620 Steel
    • Heat Treated
    • CNC Machined
    • 10 spline
    • 1-1/4" Width

    Winters Quick Change Gear Chart

Filter

"T-Bucket" Page 1 of 50

Page 1 of 50

  • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    New
    System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
    (Part #696100360)
    x
                

    By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

    • Short 4" replacement element
    • 45 micron 
    • Sold Individually

     

  • Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    New
    Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
    (Part #2751031)
    x
                Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
    • 240-33 OHM
    • 8 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
    • Designed to work with any classic fuel level gauge
  • OTB Gear 6500-R/L Finned Fuel Filter R/L
    New
    OTB Gear 6500-R/L Finned Fuel Filter R/L
    (Part #9106501)
    x
                Please view the product's page for more information
            
  • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    New
    OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
    (Part #9104660)
    x
                

    This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

    • Polished casting countersunk into heavy wall satin aluminum spinning
    • Outer shell can be painted or clear coated
    • Washable permanent filter
    • Fits standard 5" four bbl. Carb
    • Diameter 12" - height 4-1/2" 
    • Made in the USA

     

  • Air Suspension Brass Nipple Pipe Fitting, 3/8 Inch NPT
    New
    Air Suspension Brass Nipple Pipe Fitting, 3/8 Inch NPT
    (Part #6175028)
    x
                

    These brass nipple pipe fittings feature two 3/8 inch NPT fitting ends with a straight brass design for use on air suspension systems.

    • Brass construction
    • Straight angle
    • 3/8 inch NPT fitting end A
    • 3/8 inch NPT fitting end B 
  • Fel-Pro Gaskets 1043 S/B Chevy Head Gasket, 4.080 Inch Bore, .039 Thick
    New
    Fel-Pro Gaskets 1043 S/B Chevy Head Gasket, 4.080 Inch Bore, .039 Thick
    (Part #3441043)
    x
                

    This Small Block Chevy head gasket from Fel-Pro is able to provide dependable sealing under strenuous racing conditions. It accommodates high cylinder pressures and cylinder head movement associated with performance engines.

    • Wire ring design in the stainless steel armor surrounding each cylinder gives a highly concentrated seal around the combustion chamber 
    • Raises combustion sealing force to approximately three times that of standard head gaskets
    • Steel wire rings give high combustion seal strength
    • Not intended for use in emission controlled vehicles
    • Do not use on aluminum blocks with liners

    Specs:

    • Engine Family: V8 Small Block
    • Engine Displacement: 262, 265, 267, 283, 302, 305, 307, 327, 350, 400 Engines and Race Engines
    • Volume: 8.9
    • Thickness: .039"
    • Gasket Bore: 4.080"
    • Combustion Seal: Pre-flattened steel wire
    • Application Note: Small chambered aluminum race heads and some Vortec engines - Will not fit conventional OEM-type combustion chambers

    Speedy Tip for Proper Head Gasket Seal (GIF)  

  • AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    New
    AVS GAU-200AVS1 Single Needle Air Suspension Gauge, 0-200 psi
    (Part #9109011)
    x
                

    AVS Silver Face Single Needle Gauge is one of the best on the market. It features silver gauge face color and black lettering. Full sweep gauge range 0-200 psi.

    • Silver gauge face
    • Black Lettering
    • Dual Needle
    • Dome shaped glass
    • 2.20 inch diameter
    • Full sweep gauge range
    • 0-200 psi
    • 1/8" NPT threads
  • OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    New
    OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
    (Part #9106505)
    x
                

    Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

    • Show quality
    • Right to left fuel flow
    • Permanent washable stainless filter 
    • Utilizes compact ORB/AN-6 fittings 
    • Compact, functional, good looking
    • Smooth Style
    • Made in USA

    Specs:

    • Very compact in size, the bowl is 2.4" in diameter
    • Total height and width are 4-1/4" and projection from surface is 3"
    • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
    • Drilled for 5/16" mounting hardware - (not included)
    • 100 Micron

     

  • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    New
    Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
    (Part #617231507)
    x
                
    This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
    • 150 Degree
    • Aluminum Construction
    • Red/Blue anodized finish
    • Adapts -6 AN hose to -8 AN female fitting
    • -8 AN female fitting inlet
    • -6 AN hose outlet
    • Works with stainless or nylon braided hose 
  • Clayton Machine TA-202 Elliptical Throttle Pedal
    New
    Clayton Machine TA-202 Elliptical Throttle Pedal
    (Part #231048)
    x
                

    This elliptical throttle pedal from Clayton Machine has drilled I-beam arms. It also features durable chrome plating that never requires polishing.

    • Drilled I-beam arms
    • Durable chrome plating (never needs polishing)
    • Molded rubber pad
    • Clean “inline” styling
    • Fully adjustable arm with a spring loaded pedal
    • Dimensions: 12” tall, 1.5” wide

     

  • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #6172245091)
    x
                
    This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
    • Aluminum Construction
    • Black anodized finish   
    • 45 Degree 
    • Adapts -8 AN hose to -10 AN fitting   
    • -10 AN Fitting Inlet   
    • -8 AN Hose Outlet  
  • Air Suspension Brass Male Run Tee Fitting, 3/8 Inch NPT
    New
    Air Suspension Brass Male Run Tee Fitting, 3/8 Inch NPT
    (Part #6175019)
    x
                

    These brass male run tee fittings connect and branch three 3/8" NPT threaded fittings. These brass T-shaped fittings feature one male and two female ends.  They are for use on air suspension systems and air line tube connections.

    • Brass construction
    • 3/8" NPT fitting end A
    • 3/8" NPT fitting end B
    • 3/8" NPT fitting end C
  • Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    New
    Classic Instruments SN35T11 Fuel Sender Tube, 11 Inch, 240-33 OHM
    (Part #2751034)
    x
                

    Classic Instruments Tube Fuel Level Senders are perfect for applications where swing arm senders won't fit due to issues with clearance. These Tube Fuel Senders also provide a more accurate reading than swing arm senders. Compatible with both both gasoline and diesel fuels.

    • 240-33 OHM
    • 11 Inch Length 
    • Compatible with both gasoline and diesel
    • Compatible with fuels with up to 10 percent Ethanol
  • Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    New
    Painless Wiring 50305 6-Switch Rocker Circuit Breaker Panel
    (Part #91050305)
    x
                

    Check out this 6-switch Rocker circuit breaker panel from Painless Performance. It features color coded lighted rocker switches, 18 feet of TXL wire, vibration resistant terminals and a black finish for reduced glare.

    • Features circuit breakers in place of standard fuses
    • Panel controls: Start, ignition, fuel pump, electric fan/water pump and 2 accessories
    • Made in the USA

    Assembly Instructions (PDF)

  • GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    New
    GT Performance 54-5717 GT3 Autocross II Pro-touring Wood Steering Wheel
    (Part #910545717)
    x
                

    This GT3 Autocross II Pro-Touring wood steering wheel from GT Performance pays tribute to a timeless performance design and elevates it to the next level. GT Performance did this by featuring a special tiered spoke design with lightening holes and fastened using unique aircraft grade rivets. This wheel has a three-bolt mounting pattern and is interchangeable with any standard three bolt hub or horn button.

    • Aluminum spoke construction
    • Special tiered spoke design
    • Fastened using unique aircraft grade rivets
    • Genuine hand rubbed stained mahogany rim with sculpted finger grips and sealed with a polyurethane clear coat for a protected gloss finish
    • Modular construction design allows for removal of the grip for custom painting to match your vehicles interior perfectly
    • 3-bolt mounting pattern, can be used with any GT3 installation hubs and GT3 horn buttons
    • This 3-bolt mounting pattern is interchangeable with any standard 3-bolt hub or horn button
    • Diameter: 15″ Dish: 2″
    • Made in the USA

    Frequently Asked Questions (PDF)  

    GT3 Steering Wheel Hub Applications (PDF)

  • Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    New
    Fragola 231807-BL 180 Degree Adapter Hose End Fitting, -8 AN to -6 AN
    (Part #6172318071)
    x
                

    This black 180 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • Aluminum Construction
    • Black anodized finish
    • 180 Degree
    • Adapts -6 AN hose to -8 AN fitting
    • -8 AN Fitting Inlet
    • -6 AN Hose Outlet 
    To learn more about our AN fittings, be sure to check out our tech articles; Fasteners - Brake, AN and Pipe Thread Fittings  and
    How to Assemble Push-On Hose Ends                                                                                           &nbs
  • Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    New
    Fragola 231813 180 Degree Adapter Hose End Fitting, -16 AN to -12 AN
    (Part #617231813)
    x
                

    This 180 degree Fragola hose fitting adapter allows you to connect a -16 AN hose to a -12 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature a red/blue anodized finish for a product that both looks and performs great. Works with a steel braided hose.

    • 180 Degree
    • Red/Blue anodized finish
    • Aluminum Construction
    • Adapts -16 AN hose to -12 AN fitting 
    • Works with steel braided hose

     

  • Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    New
    Fragola 2312151 120 Deg. Adapter Hose End Fitting, -12 AN to -16 AN
    (Part #6172312151)
    x
                

    Fragola's 120 degree adapter hose ends offer a black anodized finish and eliminate the permeation issues common with aftermarket racing hose. This adapter adapts -12 AN hose to -16 AN female fitting.

    • 120° hose end fitting
    • Aluminum construction
    • Black anodized finish
    • Adapts -12 AN hose to -16 AN female fitting
  • Coker Tire 639750 Firestone Bias Ply Blackwall Tire, 550-16
    New
    Coker Tire 639750 Firestone Bias Ply Blackwall Tire, 550-16
    (Part #639750)
    x
                

    This bias-ply Firestone tire from Coker Tires is made in the original molds to maintain authenticity. Each tire is made in the USA so you can trust that each tire has been tested for quality as well as durability.

    • Tread Width: 4.25
    • Section Width: 6.06
    • Overall Diameter: 27.36
    • Load Index: No
    • Speed Rating: No
    • Max Load Capacity: 840@32PSI
    • Rim Width: 3.25 - 4.00
    • Tube Type or Tubeless: Tube Type

    Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

  • Fragola 224509 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    New
    Fragola 224509 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
    (Part #617224509)
    x
                Fragola's 45 degree adapter hose ends offer a bright dip  anodized blue/red  finish and eliminate the permeation issues common with  aftermarket  racing hose.  A unique "double-swivel" design allows for  clocking  adjustment during installation.
    • 45° hose end fitting
    • Adapts -8 AN hose to -10 AN fitting
    • Blue/Red anodized finish
    • Double-swivel design
    • Works with braided hose
Goto Previous PagePrevious Page
1 2 3 4 5 ... 50