Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Filter

Page 1 of 50

Products

T-Bucket

Shop T-Bucket At Speedway Motors

Speedway Motors’ fantastic selection of ready-to-assemble T-Bucket kits makes it easy and affordable to build a fun, personalized street rod! Speedway kit car packages are designed with the do-it-yourself enthusiast in mind. A variety of crate engines and all engine components are offered for any application. The hand-made fiberglass roadster bodies, frames, and wiring harnesses are engineered for simple, bolt-together construction, making them perfect for rookie rodders and seasoned pros alike.

Featured Products
  • Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    New
    Clevite H-Series 1969-Up Small Block Chevy Rod Bearings
    (Part #757R663H)
    x
                Clevite's H-Series was developed primarily for use in NASCAR type racing, but  they are suitable for all types of competition engines. These sets are  specifically for 1969-Up 302-305-327-350 S/B Chevy "Large Journal" engine (with 2.100" rod  journals).
    • Use H-series bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range.
    • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
    • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.
    • X001 has .001" extra bearing clearance

    H-Series Features (Link)
  • Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    Wilwood 290-0632 570 Brake Fluid, 12 oz Bottle
    (Part #8352900632)
    x
                

    Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

    This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

    • Dry Boiling Point:  573° F
    • Wet Boiling Point:  313° F

    8352900632 Instructions (PDF)

  • 4 Inch Peep Mirror
    $14.99
    Product Rating: 4.09 Stars
    4 Inch Peep Mirror
    (Part #92550745)
    x
                Our 4" diameter peep mirror clamps to the top edge of the door. Fits over a door edge that is app. 1/8" thick or thinner. Fits right or left side (reversible). A popular and universal mirror at a low cost. Sold each.
            
  • Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    Straight 3/8 Inch-24 IFF to 1/8 Inch NPT Male Adapter
    (Part #91031831)
    x
                

    Brass adapter.

    Straight 3/8"-24 IFF to 1/8" NPT Male Adapter

  • MSD 32273 Black Super Conductor Dodge, 2.0L DOHC
    MSD 32273 Black Super Conductor Dodge, 2.0L DOHC
    (Part #54732273)
    x
                The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

    Installation Instructions (PDF)

    Installation Instructions (PDF)

    • MSD 8350 Ford 351C-460 Ready-To-Run Pro-Billet Distributor
      MSD 8350 Ford 351C-460 Ready-To-Run Pro-Billet Distributor
      (Part #5478350)
      x
                  MSDs Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pick-up is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD Race Rotor youll find MSDs accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives.

      Installation Instructions (PDF)

      Installation Instructions (PDF)

      • Simple and clean installation with only three wires to connect
      • Powerful built-in module produces a 7.5 amp single spark through high rpm
      • Easy-to-adjust mechanical advance with supplied springs and stop bushings
      • Vacuum advance canister for improved economy (can be locked out)
      • CNC machined billet aluminum housing and billet aluminum base
      • Housing is 5/8 smaller in diameter than stock Ford distributors
      • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
      • Polished steel shaft is QPQ coated and guided by a sealed ball bearing
      • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
      • Mechanical advance assembly can be locked out for crank trigger systems
      • Advance weight pins are staked and tig welded to the plate
      • Nylon pads ensure smooth operation of the advance weights
      • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
      • Does not require an MSD Ignition Control
      • CARB E.O. Approved
      • Fits 351C, 460
      • Will not fit XD and Later Australian 351 Cleveland Engines
    • Aluminum Fan Spacers with Bolts
      Aluminum Fan Spacers with Bolts
      (Part #91015720)
      x
                  Aluminum fan spacers are required for maximum air transfer.  Fan should be 2" - 4" from radiator.  Spacers available from 1/2" to 2-1/2" thick in 1/4" increments.  Complete with bolts.  Fits 5/8" shaft. 
              
    • Winters Quick Change Gears, 10 Spline
      From: $59.99
      Product Rating: 4.67 Stars
      Winters Quick Change Gears, 10 Spline
      (Part #80285)
      x
                  
      • 8620 Steel
      • Heat Treated
      • CNC Machined
      • 10 spline
      • 1-1/4" Width

      Winters Quick Change Gear Chart

    Filter

    "T-Bucket" Page 1 of 50

    Page 1 of 50

    • System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
      New
      System 1 Filtration Short Replacement Filter Element 4 Inch 45 Micron
      (Part #696100360)
      x
                  

      By simply replacing and/or cleaning your filter elements regularly, you can avoid costly repairs to your fuel system and ensure peak engine performance. Check out this short 4 inch replacement element from System 1 Filtration.

      • Short 4" replacement element
      • 45 micron 
      • Sold Individually

       

    • Coker Tire 633505 Firestone 2-3/4 Inch Whitewall Tire 450/475-16, Bias Ply
      New
      Coker Tire 633505 Firestone 2-3/4 Inch Whitewall Tire 450/475-16, Bias Ply
      (Part #633505)
      x
                  Give your car classic but yet stylish good looks with these vintage Whitewall bias ply tires from Coker tire. They feature authentic Firestone lettering embossed in the whitewalls and have a max load capacity of 660@30PSI.
      • Legendary Firestone Deluxe Champion quality and reliability
      • 2-3/4" Whitewall
      • Tube Type
      • 3.80" Tread Width
      • 4.75" section width
      • 26.20" diameter
      • DOT and ECE approved
      • Sold Individually

      Be sure to choose the correct tire by referring to our Speedy Tip; Tire Size Guide Chart. (PDF)

    • Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
      New
      Wilwood 160-8747 GT 48 Curved Vane Spec 37 Iron Rotor, 12.6 Inch
      (Part #8351608747)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for moderate temperature racing to street use.
    • Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
      New
      Classic Instruments SN35T8 Fuel Sender Tube, 8 Inch, 240-33 OHM
      (Part #2751031)
      x
                  Classic Instruments Tube Fuel Level Senders are perfect for  applications  where swing arm senders won't fit due to issues with  clearance. These  Tube Fuel Senders also provide a more accurate reading  than swing arm  senders. Compatible with both both gasoline and diesel  fuels. 
      • 240-33 OHM
      • 8 Inch Length 
      • Compatible with both gasoline and diesel
      • Compatible with fuels with up to 10 percent Ethanol
      • Designed to work with any classic fuel level gauge
    • Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      New
      Wilwood 160-12292 GT 36 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      (Part #83516012292)
      x
                  Wilwood's GT 36 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest braking available.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • OTB Gear 6500-R/L Finned Fuel Filter R/L
      New
      OTB Gear 6500-R/L Finned Fuel Filter R/L
      (Part #9106501)
      x
                  Please view the product's page for more information
              
    • Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
      New
      Wilwood 160-11837-B GT 48 Curved Vane Spec 37 Iron Rotor, 11.75 Inch
      (Part #83516011837B)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
      New
      Wilwood 160-2979 GT 48 Curved Vane Spec 37 Iron Rotor, 12.72 Inch
      (Part #8351602979)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for moderate temperature racing to street use.
    • Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
      New
      Wilwood 160-7100 SRP 30 Vane Iron Rotor, 11 Inch
      (Part #8351607100)
      x
                  SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
      • Premium grade, medium weight castings.
      • Suitable for moderate temperature racing to street use.
      • For ultimate durability in racing use comparable ULHP or GT rotors.
    • Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      New
      Painless Wiring 50302 6-Switch Fused Panel with Wiring and Hardware
      (Part #91050302)
      x
                  

      This heavy duty lightweight switch panel from Painless Performance is designed to mount to a roll bar using standard metal hose clamps. Lighted rocker switches are color coded for quick reference.  All of the circuits are individually fused and are easily accessible for quick testing and replacement. This kit comes complete with 18 ft. of TXL wire, using fully insulated terminals. Made in the USA!

      Installation Instructions (PDF) 

      The Kit Controls:

      • Start
      • Ignition
      • Fuel pump
      • Electric fan/water pump (Switch up position - fan on only / Switch middle position - all off / Switch down position - fan & water pump on)
      • Two accessories

       

       

    • Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
      New
      Heidts SB-012 Sway Bar Bracket Kit for Tubular Full Lower Control Arms
      (Part #413012)
      x
                  

      This stabilizer bar bracket kit from Heidts is for tubular full lower A-Arms. These brackets bolt onto the control arms for a quick and simple installation. These brackets will only work on strut-less style control arms designed for stock coil springs. They will not bolt onto a coil over type arm as most of those do not have a plate in the center of them to bolt anything onto them.

      • Steel Construction
      • Hardware Included
      • Sold as Kit
      • Natural Finish

      Installation Instructions (PDF)

       

    • Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      New
      Torque Converter, TH350, 3500+ RPM Stall 10 Inch
      (Part #109617)
      x
                  

      This 10" Torque Converter is designed for use in light cars where other stall converters may still be too "tight." This torque converter has a painted finish and is sold individually. 

      • 10" Converter
      • For GM TH350 transmission
      • 3500+ RPM stall
      • Sold Individually 

      To learn about how torque converters work and what to consider when purchasing one, check out our tech article. Choosing the Right Torque Converter. 

       

    • OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
      New
      OTB Gear 4660 Orbit Cast Spun Aluminum Air Cleaner
      (Part #9104660)
      x
                  

      This Orbit cast heavy aluminum spun air cleaner from OTB Gear has a truly unique look. The spun shell can be painted or clear coated.

      • Polished casting countersunk into heavy wall satin aluminum spinning
      • Outer shell can be painted or clear coated
      • Washable permanent filter
      • Fits standard 5" four bbl. Carb
      • Diameter 12" - height 4-1/2" 
      • Made in the USA

       

    • Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      New
      Wilwood 160-11839-B GT 48 Curved Vane Spec 37 Iron Rotor, 12.19 Inch
      (Part #83516011839B)
      x
                  Wilwood's GT 48 Curved Vane Spec-37 rotors are manufactured from a proprietary iron alloy developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking, and wear. The formulation for this alloy is a derivative of technology and materials that were significant in the development of the extreme duty military spec rotors that are manufactured by Wilwood. Every Spec 37 rotor is precision machined to less than .001" run-out, flatness, and parallelism. Combined with our proven GT Series asymmetrical face slot pattern and individual dynamic balancing, you are assured the smoothest, vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.
      • Spec-37 Heavy wall Castings
      • Suitable for high temperature racing to street use.
    • OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
      New
      OTB Gear 6505 Smooth Fuel Filter, Satin, Right-to-Left Fuel Flow
      (Part #9106505)
      x
                  

      Finally there are fuel filters that are not only functional, but good looking as well! The OTB Gear smooth fuel filter is a permanent washable stainless mesh filter that will last a lifetime! Fuel flows right to left.  

      • Show quality
      • Right to left fuel flow
      • Permanent washable stainless filter 
      • Utilizes compact ORB/AN-6 fittings 
      • Compact, functional, good looking
      • Smooth Style
      • Made in USA

      Specs:

      • Very compact in size, the bowl is 2.4" in diameter
      • Total height and width are 4-1/4" and projection from surface is 3"
      • Inlet and outlet ports utilize ORB/AN-6 fittings to reduce the bulk of hose connections
      • Drilled for 5/16" mounting hardware - (not included)
      • 100 Micron

       

    • Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
      New
      Wilwood 160-7106-BK SRP-BLK 32 Vane Iron Rotor, 12.19 Inch
      (Part #8351607106BK)
      x
                  SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight.
      • Premium grade, medium weight castings.
      • Suitable for moderate temperature racing to street use.
      • For ultimate durability in racing use comparable ULHP or GT rotors.
    • Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
      New
      Fragola 231507 150 Degree Adapter Hose End Fitting, -6 AN to -8 AN
      (Part #617231507)
      x
                  
      This 150 degree Fragola hose fitting adapter allows you to connect a -6 AN hose to a -8 AN female fitting. Constructed from a high quality aluminum and features a red/blue andodized finish for a product that both looks and performs great. Works with a stainless or nylon braided hose.
      • 150 Degree
      • Aluminum Construction
      • Red/Blue anodized finish
      • Adapts -6 AN hose to -8 AN female fitting
      • -8 AN female fitting inlet
      • -6 AN hose outlet
      • Works with stainless or nylon braided hose 
    • Clayton Machine TA-202 Elliptical Throttle Pedal
      New
      Clayton Machine TA-202 Elliptical Throttle Pedal
      (Part #231048)
      x
                  

      This elliptical throttle pedal from Clayton Machine has drilled I-beam arms. It also features durable chrome plating that never requires polishing.

      • Drilled I-beam arms
      • Durable chrome plating (never needs polishing)
      • Molded rubber pad
      • Clean “inline” styling
      • Fully adjustable arm with a spring loaded pedal
      • Dimensions: 12” tall, 1.5” wide

       

    • GT Performance 21-1100 GT9 Plain Horn Button, Black Anodized
      New
      GT Performance 21-1100 GT9 Plain Horn Button, Black Anodized
      (Part #910211100)
      x
                  

      The plain (no logo) horn button features a rich black anodized finish. It can also be taken to an engraver to be customized. This smaller size diameter button shows the 9-bolt pattern for a high tech performance look. GT9 Billet Horn Buttons are machined from 6061 Aluminum and secured using a unique O-ring in a billet base. GT9 buttons are specifically designed for use with GT9 bolt pattern steering wheels. Mounts flush with the surface of the wheel. These horn buttons have a nine bolt mounting pattern and are interchangeable with any standard nine bolt steering wheel.

      • Plain (No Logo) Horn Button Can Be Custom Engraved
      • Black Anodized Finish
      • Machined from 6061 Aluminum
      • Secured Using “Sure-Lock” O-ring Design
      • Mounts Flush in Wheel. Shows 9-bolt pattern for high tech performance look
      • GT9 horn button is interchangeable with any standard 9-bolt steering wheel

       

    • Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      New
      Fragola 2245091-BL 45 Degree Adapter Hose End Fitting, -8 AN to -10 AN
      (Part #6172245091)
      x
                  
      This black 45 degree Fragola hose fitting adapter allows you to connect a -8 AN hose to a -10 AN fitting. Fragola Pro Flow Hose Ends are constructed from high quality aluminum and feature an anodized finish for a product that both looks and performs great. Works with a steel braided hose.
      • Aluminum Construction
      • Black anodized finish   
      • 45 Degree 
      • Adapts -8 AN hose to -10 AN fitting   
      • -10 AN Fitting Inlet   
      • -8 AN Hose Outlet  
    Goto Previous PagePrevious Page
    1 2 3 4 5 ... 50